James R. Lloyd

*** ************, **.

Greer, SC

Cell: 575-***-****

adlox3@r.postjobfree.com

Summary of Qualifications

Quality Systems Management

Development, implementation and administration of quality and manufacturing management systems to various general and industry specific quality and manufacturing process standards including, AS9100, ISO 9001, ANSI/NCSL Z540-1-1994 (calibration), ISO 17025 (laboratory accreditation), ASME NQA-1 (Nuclear), ASME B31.1/31.3, ASME Section IX and AWS D1.1

(welding), ASNT SNT-TC-1A (non destructive testing), and ANSI/IPC J-STD-001 (Electrical and Electronic Production).

Quality System Auditing

Extensive experience and expertise in acting as both auditor and lead auditor in quality audits to various general and industry specific quality system and technical standards such as AS9100, ISO 9000, ASME NQA-1/10CFR50, Metrology and calibration laboratory standards ANSI/NCSL Z540-1, ISO 17025, welding standards ASME Section IX, AWS D17.1, and non-destructive testing programs for ASNT SNT-TC-1A compliance.

• RABQSA Certified Quality Management System Lead Auditor (ISO 9001:2015)

• RABQSA Certified Associate Laboratory Assessor (ISO 17025)

• ASME NQA-1 Nuclear Quality Lead Auditor

Calibration Program Management

Published authority in the development and implementation of programs for calibration laboratory management and measuring and test equipment control programs for compliance and accreditation to ANSI/NCSL Z540.1, ANSI/NCSL Z540.3, and ISO 17025. Major Accomplishments

Quality Systems Engineer, Raytheon Technologies – Successful transition of Quality Management System from AS9100C to AS9100D QMS certification by TUVRhineland Certification Body

Quality Manager - IMIC Inc. US Header Operations Developed and implemented the IMIC Inc ISO 9001 Quality Management System successfully achieving ISO 9001 Registration via BSI Registrar, as well as programs for compliance to ASME B31.3, ASME Section V, ASME Section IX, and ASNT SNT-TC-1A.

Quality Manager - Celtech Corporation Developed and implemented the Celtech Quality Management System for compliance with ISO 9000 and AS9100. Implemented production welding processes for ASME B31.1, ASME B31.3, ASME Section IX and AWS D17.1 compliance, ASNT SNT-TC-1A compliant programs for the qualification and certification of NDT personnel, and AWS B5.2 programs for the training, qualification and certification of Visual Weld Inspectors.

Quality Manager - Wesport Steel and Supply Inc. Developed, implemented, and maintained the full quality management system resulting in the successful achievement of third-party registration by SRI Registrar to the ISO 9002 quality standard. Education

ISO 9001:2015 Lead Auditor Training

RABQSA/Exemplar Global Certified – Qual-Tech Inc

Cert # TPECS-0172

2017

Greer, SC

AS9100:2016 (D) Lead Auditor Training

Probitas Certified – Qual-Tech Inc

Cert # 00567

2017

Greer, SC

A.A.S.T, Electronic Engineering Technology

Thomas Edison State University

1996

Trenton, NJ

Double Major - B.M.M, Quality Management and Manufacturing Management

University of Minnesota – Crookston

2019

In Progress

Non Destructive Testing - Hellier NDT

Visual Examination – 24 hours – Level II per ASNT-TC-1A Mass Spectrometer Leak Testing – 40 hours

Pressure Change Leak Testing - 16 hours

2007

Houston, TX

Precision Measuring Equipment Laboratory Specialist (PMEL) United States Air Force

1987

Lowry AFB

Denver, CO

Professional Experience

Manager, Quality April 2018 to Present

Raytheon Technologies Simpsonville, SC

Transition of QMS from AS9100C to AS9100D and subsequent maintenance of the Woven Electronics/Collins Aerospace QMS functioning as the primary POC for all Certification Body audits and AS9100 OASIS system maintenance. Implementation of new QMS software system for corrective action, document control, and audit program management. Full rewrite of all level II QMS process procedures, complete re-implementation of site program for calibration and control of measuring and test equipment to ANSI/NCSL Z540.1 and Z540.3. Management and performance of internal audit program, corrective actions system, QMS system maintenance. Manager, Quality Assurance May 2017 to April 2018

KBRwyle Metrology Services Greer, SC

Management of the KBRwyle Metrology Services corporate QMS for compliance with multiple quality management system standards across over 30 calibration facilities located in the US and internationally. Development and management of the QMS to ensure mutual conformance to multiple industry QMS standards including AS9100, ISO 9001, ISO 17025, and ANSI/NCSL Z540.1. Management of internal audit program to include scheduling and performance of internal audits for all 30+ facility locations, management of corrective action system and QMS trend analysis, supplier audits and performance monitoring, coordinating and planning of management reviews.

Senior Quality Engineer May 2011 to April 2017

URENCO USA Eunice, NM

Responsible for the planning and performance of both internal and external supplier quality system audits for compliance with various nuclear and commercial industry quality standards such as ANSI/ASME NQA-1, 10CFR50 Appendix B, 10CFR21, ISO 9000, ISO 17025, ASME and AWS welding codes, Nondestructive examination standards (ASNT-TC-1A), and various additional regulatory and industry code requirements relative to nuclear safety and general industry manufacturing. Additional responsibilities include review and approval of maintenance operations work plans, commercial grade dedication plans, review and approval of quality assurance procedures and programs. Provide interface support to European partners (Germany, UK, Netherlands) for compliance with various US regulatory and industry codes, specifications and project requirements. Facility SME for all Metrology and Calibration subject matter. Professional Experience (cont)

Manager, Quality Assurance April, 2007 to May 2011 IMI Components Ltd.- US Header Operations Eunice, NM British company partnering with Enrichment Technology Corporation Limited Zweigniederlassung Deutschland, responsible for the fabrication, assembly, and installation of classified aluminum process piping for uranium enrichment at URENCO-USA in Eunice, New Mexico. Greenfield development, implementation, and management of the ISO 9001 Quality Management System, qualification, certification and training of all IMI US employees, implementation of SNT-TC-1A NDT/NDE programs for VT, LT, and RT, and ASME B31.3 Process Piping code compliance. Successful achievement of ISO 9001:2008 Certification through BSI Registrar. Interfacing with various US (Nuclear Regulatory Commission – NRC, URENCO USA) and European (United Kingdom, Netherlands, Germany) representatives for IMI US, IMI UK and ETC Germany for product conformance to US specifications, URENCO Commercial Grade Dedication Plans, and NRC regulatory requirements. Manage and direct a team of four Quality Control/NDE Inspectors providing support to production/manufacturing process development, visual inspection and nondestructive testing of welds, reporting and summarizing of inspection results to production management for feedback and program management. An NRC L security clearance was active and maintained for this position. Senior Project Manager July, 2002 to April, 2007

New Mexico Manufacturing Extension Partnership Albuquerque, NM Senior Project Manager for the New Mexico MEP, national program under the National Institute of Standards and Technology for providing manufacturing consulting support for small to medium sized manufacturers. Implementation projects for across multiple industries for the various tools and methods of Lean Manufacturing such as 5S, Value Stream Mapping, Kaizen Events, etc. Development and implementation support across multiple industries for QMS certification to ISO 9001, TS 16949, AS9100, ISO 17025, ANSI/NCSL Z540-1-1994, implementation of various industry manufacturing process standards such as ASME and AWS Code welding, and ANSI/IPC standards for electrical assembly.

Manager, Quality Assurance December 2000 to July 2002 Celtech Corporation Carlsbad, NM

Management of ISO 9000/AS9100 Quality Management System. Performance of in depth process mapping of critical production processes including welding processes for ASME Section IX and AWS D17.1, nondestructive testing process for ASNT SNT-TC-1A compliance, and electrical soldering processes for ANSI/IPC J-STD-001 compliance. Manager, Quality Assurance October 1998 to December 2000 Wesport Steel and Supply Inc. Carlsbad, NM

Greenfield development, implementation and management of Wesport Steel and Supply Inc. quality management system for compliance with ISO 9002. Successfully accomplished resulting in the subsequent certification to ISO 9002 by SRI Registrar. Scope of work included all aspects of development and implementation; Quality Manual development, Quality procedures development, training, internal audits, corrective actions, supplier evaluation and approval, all functions accomplished under the ISO 9002 quality standard. Successful achievement of Certification to ISO 9002 through SRI Registrar.

Quality Assurance Engineer July 1993 to October 1998 Westinghouse Electric Corporation Carlsbad, NM

Primary duties included conducting internal and external supplier quality system audits for ANSI/ASME NQA-1 and ANSI/NCSL Z540-1-1994 compliance and acting as facility SME for all metrology, calibration and measurement science issues brought to the Quality Assurance Department for review and approval. Additional duties included review and approval of quality system procedures, procurement reviews, trend analysis and evaluation of quality system deficiencies, and general quality system management support. Honors and Activities

Regional Counselor (Region 14), American Society for Quality - Measurement Quality Division

(MQD), Carlsbad NM, 1995 to 1996. Point of contact as an authoritative source for information and assistance in matters regarding calibration, measurement science, and calibration laboratory operations for all American Society for Quality members within the region 14 area. This area covered the states of Texas, New Mexico, Oklahoma, Arkansas, portions of Louisiana, Baja California, and the country of Mexico

Vice Chairman for Regional Counselors, American Society for Quality - Measurement Quality Division (MQD), Carlsbad, NM, 1996 to 1997. Coordinated and assigned technical information and assistance requests for issues regarding calibration, measurement science, and calibration laboratory operations received from ASQ membership to the various MQD Regional Counselors for response.

Publications

"ANSI/NCSL Z540-1: A New National Standard for Calibration Laboratories and Test Equipment." Cal Lab - The International Journal of Metrology. San Diego, CA: CAL LAB, March 1995, 7-10. A four page article summarizing the new U.S. National standard for calibration laboratories and measuring and test equipment.

"Guide for the Interpretation and Application of ANSI/NCSL Z540-1-1994." Handbook Z540-1. Boulder, CO: National Conference of Standards Laboratories, September 1995. Contributing author to the official interpretation and application handbook for the U.S. National Standard for Calibration Laboratories and Measuring and Test Equipment ANSI/NCSL Z540-1-1994.

"A New National Standard for Calibration Laboratories and Measuring and Test Equipment." Special Publication of the Measurement Quality Division - American Society for Quality. ASQ Measurement Quality Division, May 1996, 5. Special publication by the Measurement Quality Division of the American Society for Quality for the 1996 Annual Quality Conference.

"ANSI/NCSL Z540-2-1997 U.S. Guide to the Expression of Uncertainty in Measurement." American National Standards Institute. Boulder CO: National Conference of Standards Laboratories, October 1997. Contributing author to ANSI/NCSL Z540-2-1997, the U.S. National Standard establishing the general rules for evaluating and expressing statistical uncertainty in measurement.

Presentations and Public Appearances

Effect and Impact of Uncontrolled and Uncalibrated Measuring and Test Equipment in Scientific Research Presentation provided to Sandia National Laboratories, Westinghouse Electric Corporation – Waste Isolation Division, and the U.S. Department of Energy (DOE) - Carlsbad Area Office (CAO), Carlsbad NM, February 1996. Presentation on the importance of an effective program for the control and calibration of measuring and test equipment and its impact on the collection of scientific measurement data. This presentation was developed and provided at the request of the U.S. DOE for the purpose of introducing the new requirements of ANSI/NCSL Z540-1-1994 and its importance to the U.S. DOE in respect to the various scientific research projects conducted at the U.S. DOE Waste Isolation Pilot Plant. ANSI/NCSL Z540-1, U.S. National Standard for Calibration Laboratories and Measuring and Test Equipment, National Conference of Standards Laboratories (NCSL), Orange County California Section, Southern California Edison, Long Beach CA, April 1996. Presentation on the new requirements of ANSI/NCSL Z540-1 and the subsequent cancellation of MIL-STD-45662A. ANSI/NCSL Z540-1, U.S. National Standard for Calibration Laboratories and Measuring and Test Equipment, National Conference of Standards Laboratories (NCSL), New Mexico Section, Sandia National Laboratories, Albuquerque NM. Presentation to the New Mexico section of NCSL presented at Sandia National Laboratories, Kirtland AFB Albuquerque New Mexico, July, 1996. Presentation included question and answer discussions on the new requirements for calibration laboratories and test equipment imposed by ANSI/NCSL Z540-1, and the U.S. Department of Defense recent cancellation of MIL-STD-45662A and adoption of ANSI/NCSL Z540-1.

Contact this candidate