Mechanical Engineer Engineering
Resume:
Mechanical Engineer, Jonathan Mendez
PROFESSIONAL SUMMARY
Lead Mechanical Engineer focus in Tank Design, Construction and Repairs, Piping Design and Construction, Piping Stress Analysis and Static Equipment Design and alterations, Static Equipment Trouble Shooting, Maintenances Strategies with a Master Engineering in Mechanical Engineering of Process Plants, over ten (10) years of experience in Oil Refinery, Petrochemical Plants and Marine terminals. Developing piping stress analysis, piping design, piping construction, design and alteration of atmospheric storage tanks and pressure vessel in works areas like chemical productions plants, oil refineries, on-shore crude production, natural gas transport lines and big experience in power generation plants. Acknowledge for achieving high quality standards in engineering, design practices, maintenance practices, troubleshooting in process plants, effective improvement in key process and workflows. Acknowledge for achieving high quality standards in engineering, design practices, maintenance practices, troubleshooting in process plants, effective improvement in key process and workflows. Top skills are: Pressure Vessel Design ASME Section VIII Div1 & 2, API 650 Design and Construction, API 653, Piping Design and Construction troubleshooting in Chemical Productions Plants, Oil Refineries (ASME B31.3, B31.1), ASME B31.4, B31.8, API 579, API 571, API 510, On-shore crude production and natural gas transport lines and in power plants with high skilled techniques of engineering and team work with other disciplines, develop strategies of maintenance, construction and installation to solve problems in static equipment, atmospheric tanks, piping and equipments.
SKILLS
WORK HISTORY
Lead Stationary Equipment Engineer, Jan 2019 - Present SABIC Petrokemya, Al Jubail, Saudi Arabia
Responsible for design and modifying and assessment for mechanical integrity of static equipment under the standards that apply in the different equipment: ASME, API, TEMA, ASCE, Design and Global Practices.
Identify recurring problems and develop recommend solutions for static equipment and facilities applying methodologies, carry out structural assessments of the various static equipment, piping, tanks and modify if necessary, according to applicable code.
Advanced Design and Specification of Pressure Vessel according to ASME section VIII div 1 and 2, carry out design of new pressure vessels and develop assessment of integrity of pressure vessel in service using the code API 510.
Piping Stress Analysis with Caesar II and Analysis of nozzle loads.
Atmospheric Storage Tank Design and Modification according to API 650, API 653 and others codes
realated.
Pressure Vessel Design and Modification according to ASME BPVC Section VIII Div 1 & 2 and API 510.
CAD: SolidWorks, CadWorx, Smart Plant, Autocad
Plant 3D, Autocad, Revit, Navisworks.
CAE: Ansys Workbench, Caesar II, FE-PIPE Nozzle
Pro, PVElite, Tank, SolidWorks Simulation,
CodeCalc, Robot Structural Analysis.
Proven analytical solve pipe stress problems using Caesar II and Nozzle Pro.
Proven skills in Pressure Vessel Design, Atmospheric Tanks, Piping a Detailed Fabrication Drawings.
Perform analysis of nozzle loads WRC 107/297.
Perform RCA, MCC, Risk Analysis, What if, and
HAZOP.
Field and Shop Fabrication experience.
SAP PM, SAP MM, Office Tools, Lotus Notes,
Mathcad.
Codes and Standards: ASME BPVC Section I,
ASME BPVC Section VIII Div 1& 2, ASME B
31.1, ASME B 31.3, ASME B 31.4, ASME B
31.8, WRC 107 & 297, API 610, API 618 API
510, API 570, API 653, API 650, API 620, API
576, API 574, API 579, API 571, API 941
NEMA, NFPA 11, NFPA 30, Exxon Design
Practices, Deps Shell and other.
Evaluated drawings and data that were submitted
by vendor, Team Work, Ability to review
engineering documents, coordinate with various
engineering disciplines for completion of work,
monitored departments and participated in
development process and package specifications.
Conversant with all forms of process engineering documentation, including block diagrams, PFD’s,
P&ID’s, Data Sheets, Cause & Effect charts and
Computerized Maintenance Management System.
Al-Rashout Compound, Apartment 216, Al-Jubail, Saudi Arabia • Mobile: +966*********• adlo4z@r.postjobfree.com • adlo4z@r.postjobfree.com (Linkedin) • Date of Birth: 11-Oct-1987
Review of vendor design documentation and incorporation of vendor’s design into the detailed project engineering.
Provide technical assistance in Mechanical Engineering in Benzene, Pyrolysis Furnaces, Columns, Heat Exchangers, Piping, Repair.
Preparing specifications for vessels, materials, exchangers, expansion joints, safety devices and all kind of static equipment and piping, improvement project development, design / review of practices and procedures and updating of technical documentation, in coordination with other engineering specialties.
Responsible for integrity assessments and developed static equipment maintenance strategies in addition to identify and suggest solutions to frequent breakdowns (Bad Actor) through analysis and review of key performance indicators (KPI), including the applications of RCA studies and Failure Equipment Investigations.
Review and implement Oil & Gas industry “best practices”.
Develop at least 20 projects of engineering hot taping and stopples technique in piping of many services. Engineering Department Leader & Project Coordinator, Sep 2016 – Dec-2018. Quality Services Limited LTD, Freeport Bahamas. (Clients: Buckeye Bahamas Hub, Statoil, Martin Marietta, Pharmachen Technologies, IPS, FOCOL)
Team Lead of Piping Design and Construction, Static Equipment Design, Structures, Storage Tanks.
Tank Projects: Project Lead of the design, alterations and Construction of Atmospheric Storage Tanks according to API 650 and API 653, developing the whole process; Initial Material Estimation, Mechanical Calculations, Shop Drawings, Field Managing and Installation additional developing CNC sequences, field fabrication at in Buckeye Refinery in Freeport Bahamas.
Trouble Shooting in Offshore Marine Terminals, subsea pipelines, Structures, logistic and other.
Advanced Design of Piping according to ASME B31.1, B31.3, 31.4, 31.8 developing piping layouts, developing isometrics drawings, and best practices in piping process plants and plants of steam generation, acting like piping and pipe stress engineer in at least 50 projects.
Analyze job proposal and solutions, 3D modeling with complex geometry including section views and assembly details.
Team Lead of Piping Stress and Static Equipment Design, May 2014 - Sep-2016. PDVSA Amuay Refinery, Punto Fijo Venezuela.
Team Lead of Piping Stress and Static Equipment Design, PDVSA CRP Amuay Refinery, Project of Construction of 9 new Atmospheric Storage Tanks and Facilities
Mechanical Design Lead of nine atmospheric storage tanks according to API 650 the Project of design and construction new nine Atmospheric Storage Tanks according to API 650, develop the design using the software
(TANK), developing mechanical calculation, reviewing shop drawings, valves specification, reviewing painting specification, developing Risk Analysis.
Mechanical Design Lead of Piping of a group, developing the piping layout, stress analysis of the critical piping according to ASME B31.3 using the software CAESAR II, developing the piping stress analysis and perform the analysis of nozzle load according to API 610, WRC 107 & 297, API 650 and check de stress analysis of underground pipes. Also, in charge of the reviewing of isometrics for construction, selecting safety relief devices and others accessories for the piping.
Mechanical Commissioning Lead of the nine Atmospheric Storage Tank and piping associated, reviewing construction details versus design drawings, reviewing construction procedure and quality, reviewing allowance of construction, visit to factories of geodesic domes and internal floating roof, and others activities associated to construction ok tanks and piping.
Review of vendor design documentation and incorporation of vendor’s design into the detailed project engineering.
Static Equipment & Piping Stress Engineer, May 2012- Sep-2016. PDVSA Amuay Refinery, Punto Fijo Venezuela.
Responsible for design and modifying and assessment for mechanical integrity of static equipment under the standards that apply in the different equipment: ASME, API, TEMA, ASCE, PDVSA NFPA, Design and Global Practices of EXXON and Deps Shell.
Develop at least 40 projects of piping stress analysis using Caesar II that involve analysis of nozzle loads according to WRC 107 and 297, API 610, API 617, API 650, API 610 using Caesar II and FE-PIPE Software.
Identify recurring problems and develop recommend solutions for static equipment and facilities applying methodologies, carry out structural assessments of the various static equipment, piping, tanks and modify if necessary, according to applicable code.
Develop Inspection and maintenance engineering according to API 650, 651, 652 620 and API 653 during overhaul, reparation or construction of atmospheric storage tank. o Develop Design of Storage Tanks according to API 650 using the software (TANK), developing mechanical calculation, shop drawings, valves specification, reviewing painting specification, developing Risk Analysis and all involve according the design, maintenance and alteration of atmospheric storage tanks.
Advanced Design of Piping according to ASME B31.1, B31.3, 31.4, 31.8 developing piping layouts, developing isometrics drawings, and best practices in piping process plants and plants of steam generation, acting like piping and pipe stress engineer in at least 50 projects.
Advanced Design of Pressure Vessel according to ASME section VIII div 1 and 2, carry out design of new pressure vessels and develop assessment of integrity of pressure vessel in service using the code API 510, acting like static equipment engineer in at least 15 projects related with pressure vessels.
Review of vendor design documentation and incorporation of vendor’s design into the detailed project engineering.
Provide technical assistance in Mechanical Engineering in Amuay Refinery, troubleshooting in process plants like Power Steam Boilers, and Supply Distribution of steam, Marine Terminals, heat exchangers and piping.
Preparing specifications for vessels, materials, exchangers, expansion joints, safety devices and all kind of static equipment and piping, improvement project development, design / review of practices and procedures and updating of technical documentation, in coordination with other engineering specialties.
Responsible for integrity assessments and developed static equipment maintenance strategies in addition to identify and suggest solutions to frequent break downs (Bad Actor) through analysis and review of key performance indicators (KPI), including the applications of RCA studies, RCM, IBR at the Paraguana Refining Complex.
Review and implement Oil & Gas industry “best practices”.
Develop at least 20 projects of engineering hot taping and stopples technique in piping of many services.
Experience developing projects of marine terminals, loading arms and all static equipment necessary in marine terminals.
Ensure the highest safety standards and procedures apply all times. Mechanical Designer, May 2011 – May 2012.
CAIVET, Caracas Venezuela
Responsible for develop of calculations and analysis necessary to adapt the designs of the electrical transformers to the requirements and specifications.
EDUCATION
Bachelor of Science: Mechanical Engineer, 2011.
UNIVERSITY SIMON BOLIVAR, Caracas Venezuela.
Master Engineering: Mechanical Engineering of Process Plants, 2016 UNIVERSITY SIMON BOLIVAR, Caracas Venezuela.
Subjects: Introduction to Process Engineering, Rotating Equipment, Piping Design I and II, Advanced Pressure Vessel Design, Risk Analysis, Inspection, Maintenance, Reliability and others.
Certified: Engineering Refining and Chemical Processes, 2013. UNIVERSITY JOSE LEONARDO CHIRINOS, Punto Fijo Venezuela. TRAINNINGS, CERTIFICATIOS, COURSE AND SEMINARS
2019, API 579 Fitness for Services API 579, SABIC STC. Saudi Arabia.
2018, NDT (UT, PT, MT, VT) LEVEL 1, Rotari CA. Venezuela.
2018, OSHA-30 for Construction and General Industry, Quality Services Bahamas.
2016, ESAB for CNC Plate Cutting, ESAB, The Bahamas.
2016, Certificate in Stress Analysis with CAESAR II, Intergraph Venezuela.
2016, Corrosion in Oil Refinery, PDVSA CRP.
2015, M287: Maintenance and Inspection, Shell Global Solutions.
2015, Design of Atmospheric Storage Tank According to API 650, ISIVEN.
2014, Rules for Construction of Pressure Vessels ASME Section VIII Div. 1, National Training Center.
2013, Inspection of Pressure Relieving Devices API 576, National Training Center.
2013, Introduction to Business of Refining Processes, PDVSA CRP.
2013, Process Piping ASME B 31.3, National Training Center.
2013, Pressure Relief Devices, TECDICA.
2013, SolidWorks Essentials, ATGROUP Software.
2013, Management Plants Shutdowns, PDVSA CRP.
2013, Best Practices in Design and Installation Considerations for Floating Membranes, Seals and Domes, HMT.
2013, Basic Seminar of Welding. Lincoln Electric.
2012, Root Cause Analysis, PDVSA CRP.
2012, Risk Analysis at Wok, PDVSA CRP.
2012, Local Manager of Technical Objects in SAP, PDVSA CRP.
2011, SolidWorks Enterprise PDM User, Arcus Technologies.
2011, SolidWorks Essentials, Arcus Technologies.
2011, SolidWorks Advanced Topic, Arcus Technologies.
2011, SolidWorks Simulation, Arcus Technologies.
2010, Automation and Control Equipment Refrigeration for Energy Saving, PDVSA-CEF CRP.
2010, Management Indicators of Process Maintenance, PDVSA-CEF CRP.
2010, Reliability Centered Maintenance Plus RCM+, PDVSA CRP.
2009, ASME Student Leadership Seminar Venezuela, Caracas.
2009, ASME Student Leadership Seminar Venezuela, Mérida.
2009, VIII Congress, ASME USB.
2009, FEA Finite Elements Analysis Seminar, ASME USB-Albatros Ingeniería.
2009, CFX Seminar, ASME USB- Albatros Ingeniería.
2009, ANSYS Workbench, Albatros Ingeniería.
2008, ANSYS Design Modeler, Albatros Ingeniería.
Contact this candidate