MANISH RANJAN

(Mechanical Engineering & a Certified Welding Inspector)

email:adlnct@r.postjobfree.com

Mobile No: +91-980*******

Objective

Seeking a good opportunity and a challenging job as a QC Engineer(Welding Inspector) where my educational potential, analytical ability and job experience will contribute to the Quality, productivity and profitability of the organization and betterment of my career prospects.

Professional Synopsys

A qualified Mechanical Engineer with Honours Class from RIET, Jaipur, India.

Certified Professional in CSWIP 3.1 (Cert no. 70729). Certified professional in NDT Level II from American Society for Nondestructive Testing (ASNT).

Have an overall experience of more than nine (9) years in Quality Control /Supervision with construction companies in India, Malaysia, Saudi Arabia, Oman & Kuwait.

Supervised erection / installation / inspection of the following: Piping, Pre-fabrication, Pre-commissioning & commissioning activities of piping systems. Critical pipe supports, Special pipe supports, Tie-in point activities, Material traceability, dimensional checking, involved in heat treatment, Non-destructive activities, Line checks prior to hydro testing, Mechanical completion check activities etc.

Well verse with International codes & standards such as ASME B31.1, 31.3, ASME SECTION II, ASME SECTION V, ASME SECTION IX and ASTM. Visual, PWHT & NDT inspection of Piping, Pipeline & Structural Welding.

Familiar Test pack review, Line checking and Pressure Testing. Piping Components and their Use.

Familiar with vendor piping package and Equipment piping package. Areas of Exposure

Process Piping.

Power Piping.

Welding.

Construction.

Project Management.

Quality Control & Quality Assurance.

Punch List.

Non Destructive Testing:

Penetrant Testing (PT)

Magnetic Particle Testing (MPT)

Ultrasonic Testing (UT)

Radiography Testing (RT)

Work Experience

1. COMPANY: Microsonic Inspection Services.

Project : RIL Hazira Surat

Duration : March 2019 to Feb 2020.

Position : QC Inspector .

2. COMPANY: NBTC KUWAIT.

Project : KNPC CFP MAB2.

Duration : May 2018 to Feb 2019.

Position : QC Inspector.

3. COMPANY: Punj Lloyd Ltd.

Project : Mundra LPG Terminal Project(Tank & Bullets). Duration : February 2017 to April 2018.

Position : QC Inspector(E1).

4. COMPANY: Petron Gulf LLC.

Project : Sohar Refinery Improvement Project(ORPIC). Duration : June 2015 to November 2016.

Position : QC Inspector (Welding & Piping).

5. COMPANY: Megasonic Inspection services

Project : Ratnagiri Gas & Power Pvt. Ltd., Ratnagiri, Maharashtra. Duration : October 2014 to April 2015.

Position : Welding Inspector.

6. COMPANY: Sinopec E & C Middle East Co.Ltd.

Project : Sadara Chemical III Project, Jubail, Saudi Arabia. Duration : July 2013 to September 2014.

Position : Welding Inspector.

7. COMPANY: Megasonic Inspection services

Project : Nuclear Power Plant, Kaiga, Karnataka.

Duration : November 2012 to April 2013.

Position : Welding Inspector.

8. COMPANY: Punj Lloyd Oil & Gas (Malaysia) Sdn Bhd Project : Sabah-Sarawak Gas Pipeline Project

Duration : June 2011 to September 2012.

Position : QA/QC Inspector.

9. COMPANY: Punj Lloyd Ltd.

Project : I.O.C.L. Refinery, Panipat

Duration : June 2010 to April 2011.

Position : QA/QC Inspector.

Duties & Responsibilities:

Performed inspection on erection and installation of pre fabricated line. Check visual and dimensional inspection of materials, check correctness of the description & size of pipe, fittings and supports indicated in the detailed engineering drawing, check the fit-up, alignment, edge preparation, welding allowance & tolerances etc based on standards and client requirement.

Check welding activities conformance to the approved welding procedure specifications (WPS) and welder qualification record (WQR). Performed material inspection, consumable inspection, check equipment and accessories.

Prepared of Quality Plans according to Inspection Test Plan. Reviewed method statement and Inspection Test Plan with respect to project specification.

Carried out Inspection activities in accordance with Inspection and Test Plan.

Reviewed welding procedure specifications (WPS) with relevant Procedure Qualification Test (PQR) prior to start of welding activities at site.

Maintaining WPS, PQR and WQT used by the contractors and keep updating. Closely monitoring the weekly weld repair rate of each welder joint basis & linear basis.

Preparation of Job Clearance Card (JCC) for the welding operators. Inspect joint preparation, joint configuration, cleanliness and preheat temperature as per WPS.

Visual examination of welded joints root passes, penetration, excessive reinforcement, undercut, cracks and porosity.

Inspecting the prefabrication works by the subcontractors including the inspection of incoming materials, material handling, heat number transfer, fit-up, welding activities, PWHT of welding joints, Hardness test, PMI.

Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, proper rating and face of flanges.

Ensure that pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe supports details. Monitoring the QA/QC documentation of contractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements.

Issuing NCR’s when the contractors noted non-conformity activities. Witness final pressure tests, including verification that pressure gauges have adequate dial range and is calibrated. Verify that the testing pressure does not exceed the allowable pressure of any equipment on the system. Verify that the required test pressure was maintained for the specified length of time without any leakage.

Confirm repairs, re-testing and re-inspection in accordance with the specifications. Ensure blinds removed and correct gaskets are installed. Verification of closed punched items and conduct walkthrough for each completed piping system prior to mechanical acceptance. Monitoring the QA/QC Documentation of the subcontractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements.

Inspected all type of materials like CS, SS, Duplex,P4,P34,P43, P45, Dissimilar metals etc.

Witness of alignment, orientation and dimensions of installed piping. Monitor PWHT and verification of PWHT reports with respect to procedures and specifications.

Coordinating with client/consultants while the inspection is being carried out and offer any clarification is required.

Line checking through isometric drawing and P&ID.

Prepare hydro test packages, line check and punch listing Educational qualification

B.Tech in Mechanical Engineering from RAJASTHAN INSTITUTE OF ENGINEERING & TECHNOLOGY (RIET), Jaipur, Rajasthan, India. CSWIP Certified Professional from TWI Certification Ltd UK. Achieved more than 80% in NDT methods PT, MPT, UT and RT from Dona World Technical Training & Certification, Kolkata, India. Software skills:

Excellent computer hardware and operating system skills. Ms Office word.

Ms Power Point.

Ms Excel.

Autocad Skills.

Construction Integrated Management System(CIMS).

Personal details:

Name : Manish Ranjan.

Nationality : Indian.

Residence : Patna, India.

Date of Birth : 21-October-1988

Marital Status : Married.

Gender : Male.

Mobile No. : +91-980*******

Passport details:

Passport Number : R3688149

Place of Issue : Patna

Date of Issue : 22/12/2017

Date of Expiry : 21/12/2027

Place of Birth : Chapra, Saran

Contact this candidate