ERIC PAGE

**** ****** ****** ****, ******, Louisiana 71016

318-***-****

adlmxv@r.postjobfree.com

Profile: To obtain an Electrical & Instrumentation Maintenance/Construction position with your company. Dynamic Electrical Technician skilled in troubleshooting, overhauls, installations, adjustments and repairs on a variety of electrical equipment and instrumentation. Desires a senior technician-level role in the maintenance, instrumentation industry.

Skills

National Electrical Code knowledge

High Voltage transformers

Instrumentation (Transmitters and Control Valves) Rosemount, Yokogawa, Duzurick, Fisher

PLC trained (Allen-Bradley Control Logix, Siemens Step 7)

Schematics interpretation

Knowledge of backup systems

Team player Self-motivated

Skilled with ladders and scaffolds

Arc flash knowledge (NFPA 70 E certified)

Soldering skills

Power supplies

Team player Multi-tasking

Additional Information

Date of Birth: April 19, 1962 Family Status: Married, two children

Work History:

12/2018 to present

Instrumentation Technician

Supervisor: James Mathews

Triad/ Valero Refinery, Houston Texas

As instrumentation technician my duties were to verify all instrumentation in new alky project were installed per PID drawings, specification sheets, and location drawings. Performing checks of proper calibration, shooting loops with comunicator back to DCS. Filling any closed loop wet legs with proper

02/2017 to 12/2018

CBI (McDermott) Cameron LNG Hackberry, Louisiana

Electrical/Instrumentation Supervisor: B. J. Hicks

As an electrician/ instrument tech my duties were to insure all power wiring and instrument wiring was complete. Raceways, wiring id’s tagging. Install and check transmitters and valves for correct information and tagging per specification sheet, correction orientation. Troubleshoot any field instrumentation on existing facilities for client as per their request. Completed all wiring on BOG (boil off gas) compressor PLC Cabinets. Completed raceway and wiring for battery room for existing facilities UPS system.

12/2014 to 2/2017

Chief Electrician/ET

Supervisor Robert Kyrisch

Transocean Offshore Deepwater (Deepwater Asgard) – Houston, TX

On the Asgard my duties where AC and DC motor maintenance and theory of operation up to 1150 HP. Air Conditioning and Refrigeration maintenance. Motor control operation and maintenance. Maintaining 11KV down to all power distribution. Lighting and AC 230V power distribution operations and maintenance. Electrical schematic reading. Aker 1250 MDDM (Top Drive) maintenance and troubleshooting. Varco conveyor and PLS V-door control panel maintenance and troubleshooting. Aker Pipe handling Machine troubleshooting and maintenance of associated Step V Siemens PLC. Maintenance and troubleshooting of Aker Draw works and associated equipment with Derrick Crown Motion Compensator and Active Heave systems control equipment. Kongsberg K-Chief control systems maintenance and operation. Siemens 690V A/C variable speed drives maintenance and operation. Rolls Royce thruster control systems maintenance and operation. Aker/Siemens AC drive maintenance and troubleshooting. Take care of all instrumentation transmitter for levels and flow, distribution valves. All Third-Party equipment maintenance and troubleshooting. Supervise the junior electricians to promote their skills on daily preventive maintenance and troubleshooting.

09/2010 to 12/2014

Chief Electrician

Supervisor: Greg Smith

Transocean Offshore Deepwater Drilling (Deepwater Pathfinder) – Houston, TX

On the Pathfinder my duties where AC and DC motor maintenance and theory of operation up to 1150 HP. Air Conditioning and Refrigeration. Motor control operation and maintenance. Lighting and AC power distribution operations and maintenance.

PLC fault finding. Electrical schematic reading. TDS-8S and TDS-4S Varco Top Drive maintenance and troubleshooting. Varco conveyor and PLS V-door control panel maintenance and troubleshooting. Varco Pipe handling Machine troubleshooting and maintenance of associated Step V Siemens PLC. Maintenance and troubleshooting of Dreco Drawworks and associated Hitec control equipment and PLC's. Kongsberg Simrad control systems maintenance and operation. ABB Sami Megastar AC drives maintenance and operation. Kamewa thruster control systems maintenance and operation. GE AC drive maintenance and troubleshooting. Supervise the junior electricians on daily preventive maintenance and troubleshooting. Tested, troubleshot and calibrated equipment in the shop and in the field such as Rosemount level transmitters, Rosemount differential flow transmitters Blueprints, schematics, drawings and layouts to complete repairs.

09/2008 to 01/2010

Electrician/Chief Electrician

Supervisor: Stan Carden

Transocean Offshore Deepwater Drilling (Deepwater Horizon) – Houston, TX.

As an electrician on the rig, primary duties were to work on preventative maintenance, assist drill crew on trouble calls, and assist on any capital improvements. Daily preventive inspection on equipment. Comply with the permit to work and isolation system. Maintain, troubleshoot and repair all power generation and distribution equipment, i.e. Generators and engine controls, SCRs, switchgears, transformers. Perform maintenance and repair on electrical components of drilling equipment, Driller's console, AC drilling motors and auxiliaries, Top Drive System, draw works, Mud pumps, and repair on electrical components of marine equipment. Thruster motors and auxiliaries, ballast pumps, control panels, cranes. Recorded all repair, non-repair and PMCS data in the information management system. Updated and modified rig instrumentation and systems to improve operation. Installed electrical and wiring for power, controls and lighting.

12/2005 to 08/2008

Electrical/Instrumentation Technician Supervisor: James Gray

ABB INC./International Paper – Mansfield, Louisiana

As an E&I in the Primary Products area, I work on daily work orders, preventive maintenance, assist operations on trouble calls, and get hands on capital improvements Tested, troubleshot and calibrated area instrumentation and valve equipment in the shop and in the field.

Updated and modified components and systems to improve operation. Interpreted blueprints, schematics, P&ID’s drawings and layouts to complete repairs.

10/2002 to 12/2005

Electrical/Instrumentation Technician Supervisor-James Gray

Kellogg Brown & Root/International Paper – Mansfield, Louisiana Pulp Mill & Wood Yard E&I

As an E&I in the Primary Products area, I work on daily work orders, preventive maintenance, predictive maintenance assist operations on trouble calls, and get hands on capital improvements. Interpreted blueprints, schematics, drawings and layouts to complete repairs. Installed electrical and mechanical equipment in accordance with the National Electric Code. Maintained, repaired and tested from 13.8KV,4160V A/C electrical power distribution to 120-volt power systems, and electronic instrumentation. Installed electrical conduit and wiring for power, controls and lighting. Maintained and replaced and repaired motors and pumps. Tested, troubleshot and calibrated transmitter equipment in the shop and in the field. Documented all maintenance and repairs performed on equipment. Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems. Updated and modified components and systems to improve operation.

04/2002 to 10/2002

Electrician Supervisor-Mark Burns

WPS Industries WPS Industries Group – Simsboro, Louisiana

This is a production facility that manufactures numerous pieces of equipment for the wood and paper industry. Such as dust systems for wood product industry, control panels, plc panels, custom built variable speed drives, abort gates for pneumatic systems. As an electrician, I was in charge of building of all control panels at panel shop, this included installation of hardware, wiring, any drawing changes and drawing accuracy. Also, would help the construction crew at various field jobs in the area with conduit installation, wiring of motor controls and plc troubleshooting.

09/1998 to 03/2002

Electrician Willamette Industries, Simsboro, Louisiana

As an electrician, I was in charge of building of all control panels at panel shop, this included installation of hardware, wiring, any drawing changes and drawing accuracy. Also, would help the construction crew at various field jobs in the area with conduit installation, wiring of motor controls and plc troubleshooting.

Shift Electrician

Supervisor Charles Murphy Willamette Industries Engineered Wood Products (EWP) – Simsboro, Louisiana

This is a production facility that manufactures two different woods products. They consist of Laminated Veneer Lumber (LVL) an I-Joists. As a Shift Electrician, I was the front-line defense for all operational trouble calls. Maintaining and troubleshooting PLC’s (Allen-Bradley PLC 5, Panel View 550's, 1000's, & 1400E's). Maintaining and troubleshooting PLC’s (Allen-Bradley PLC 5, Panel View 550's, 1000's, & 1400E's). 480-volt MCC motors and controls maintenance. Installed electrical conduit and wiring for power distribution, controls and lighting for upgrading equipment. Measured and read DMM, meggers, micrometers and thickness gauges using electrical and mechanical testing instruments. Interpreted blueprints, schematics, drawings and layouts to troubleshoot repairs.

07/1995 to 09/1998#

3 Paper Machine Shift Electrician Brown & Root Industrial Services/ International Paper – Mansfield, Louisiana

Maintaining and troubleshooting PLC's (Allen-Bradley PLC5, Slick 500's), AC Variable Speed Drives (Allen -Bradley 1336+, Allen-Bradley-1557 Medium Voltage Drives, and Reliance SA-3000VFD). Taking care and checking calibration on area instrumentation. Tested, troubleshot and calibrated equipment in the shop and in the field. Working on Medium Voltage Drives (AB 1556 Variable Speed Drives), across the line 4160 starters with 110-volt control

Education

Graduated High School at Castor High School Castor, Louisiana

2 years a Vo-Tech school in Minden, Louisiana

Industrial Instrumentation

HVAC schools in Beaumont, Texas

Basic, Advanced, Troubleshooting and repair on HVAC systems

NCCER Certified Plus Electrical, NCCER Certified Instrument Technician

Contact this candidate