ESSIEN, IFIOK EFFIONG

Sex - Male

Date of Birth - 7th September, 1980

Place of Birth - Eman

Marital Status - Single

L.G.A. - Uruan

State of Origin - Akwa Ibom

** ********* ******,

Off Jezza Street,

Egbeda.

Lagos, Nigeria.

Email: adlmci@r.postjobfree.com

Tel: +234**********

EDUCATION:

2006 - Bachelor of Engineering (B. Eng.), Electrical/Electronic Engineering, University of Port Harcourt, Port Harcourt, Nigeria.

2014 - Post Graduate Diploma, Marine Transport Technology, Maritime Academy of Nigeria, Oron.

RESEARCH WORK:

Design and Construction of Automatic Safety control devices in generators (2006).

Strategic Planning and Organisational Performance and Survival in Akwa Ibom State (2014).

TRAINING CERTIFICATE:

i.Certificate in Automation Engineering

Pneumatic/Electro-Pneumatic Controls.

Programmable Logic Controllers ( PLC )

SCADA (Wonderware, WINCC & FactoryTalk View)

Process Control, Instrumentation and P& ID

AC Frequency Drives/Distributed Control System

Calibration and Maintenance of Process Instrument using HART475, Fluke 789

ii.Member, Nigeria Society of Engineers (MNSE).

iii.Certified Maintenance and Reliability Professional (CMRP) 231822

iv.Certificate in AVEVA PDMS

v.Certificate in AUTO CAD Design.

vi.MS Office, Microsoft Project, Revit-MEP, Archi-CAD.

vii.Project Management Professional – in view

11 YEARS EXPERIENCE IN ELECTRICAL/INSTRUMENTATION ENGINEERING, ENERGY, OIL &GAS (DESIGN & INSTALLATION, COMMISSIONING, STARTUP & MAINTENANCE – (ONSHORE & OFFSHORE)

An experienced electrical/instrumentation project personnel exposed to Construction, Commissioning, Operations, Start up, Maintenance, Testing, Planning, Site support, Supervision, Coordination (Onshore & Offshore) and Site management.

Documents & Drawings, Reviews, updates, Modifications, Client Request Reviews & solutions, load balance assessment, Electrical safety conformance audit, Inspection & Testing of Response of electrical equipment in a Substation, Portable Appliance Testing(PAT), Facility Management Services, Inverter & Solar System Installation.

I am good in design, trouble shooting, repair, maintenance and calibration of Field Instruments and good understanding of P&ID, hook-up drawings and Electrical drawings

A basic knowledge of design for oil & gas treatment, installation and thorough knowledge of equipment used in oil & gas.

Electrical Earthing, Bonding and Lightning Protection System scheme design.

Field Change Request(FCR), Design Change Note (DCN), Preparation of material take off (MTO)

Technical bid evaluation Reports and procurement support.

Installation and termination of Power Cables (Motor Control Rooms) etc

Design / Drafting single line diagrams and other related diagrams for installations.

Job Method Statement and Job Risk Assessment related to Oil & gas.

Hands on working experience of transformer, high and low-tension panels, cabling, electrical distribution control panel and circuit breakers. Installation and repairs of power distribution equipment s and ability to analyse faults signals on protection relays

Ability to logically analyse faults from first principle to determine solutions.

HV & LV Transformer Installation,500KVA 33 / 0.415KV, 350KVA 11 / 0.415kV.

Power System Upgrades, Lightning Protection System, insulation testing using digital Multi-Function Tester MTF1730 megger Instrument and cable sizing calculation.

Preparing scope of work, time schedule and cost estimation of electrical bill of materials.

Preparation of specification and technical data sheet.

Cogent experiences in the installation and repair of electrical tools and equipments used in Oil DRILLING RIG (Off shore operation), Distribution equipments,RCD, ELCB, RMU, RCCB, AMF, Switch Gears, COS, CCTV, Fire Alarm Control Panels etc.

Carry out Maintenance Strategy plan through corrective, preventive and Condition Monitoring on equipment to minimize down time/cost and optimize throughput in the operation process.

WORK EXPERIENCE

Electrical and Instrumentation Supervisor Ogbele Refinery, Rivers State.

Company Name: Niger Delta Petroleum Resources Plc.

Dates Employed: Sept. 2018 – Till Date.

Ensuring that the scope of work in the ISBL and OSBL are implemented according to company’s specifications.

Ensuring that installations of electrical and instrumentation work on the trains are done with safety procedures.

Supervised engineering project through greenfield and brownfiled area of oil and gas industries.

Leading the team in resolving instrument, control & electrical technical issues on gas plant and refinery expansion.

Supervising/Coordinating the efforts of the Sub-Contractor(s) in his area of specialty, ensuring that the Contractor performs diligently all his obligations under the contract (quality, schedule and cost).

Preparing bid packages, work scopes, design review, equipment selection and procurement, site based sub-contractor management and project work pack delivery.

Quality Assurance/ Control maintaining logs and verifying all items are correct prior to pre-inspection

Assisting in developing the annual electrical plan, ensuring that the annual plan is correctly inserted into SAP, checking the electrical spending using SAP, and ensuring jobs adhere to planned cost and timeline.

Initiating the participation of the various internal areas/ groups, ensuring that input to the Contractor(s) is adequate and timely, and in accordance with the roles & responsibilities.

Providing direction on electrical scope and requirements to the suppliers based on specifications included in the procurement agreement.

Providing technical assistance during construction, pre-commissioning, commissioning and start-up

Communicating issues, questions, or concerns to supervisors and implementing contractor.

Advance Electrical Commissioning Specialist Egina - Total FPSO

Company Name: Prime Atlantic Cegelec, Nigeria

Dates Employed: Feb 2018 – Sept. 2018

Location: TOTAL FIELD OPERATIONS, Nigeria.

Pre - commissioning and Commissioning of Electrical and Instrument Equipment(Flow Transmitters, Pressure Transmitters, Level Transmitters, Temperature Transmitters, Limit Switch, MCC Switch Board Panels, Instrument Valves on Oil & Gas Well Heads, SDV Panels, ESDV Panels, Tag Installation Equipment and Distribution Board ), UPS panels, Incoming & feeder breakers, generators, transformers and switch gears.

Inspect of LV Cable installations, commissioning, operational test procedures (OTP) shutdown, hook-up and start-up experience, quality control and assurance, vendor package and site acceptance test (SAT)

Commissioning (ICAPS) forms, ESD cause and effect matrix, I/O's list and inspection of test equipment and request for missing items.

Perform low voltage & high voltage switching, isolation, de-isolation, lockout, padlock, test and prove dead according to applicable company requirements.

Perform inspections, troubleshooting & repairs of electrical systems, equipment, and component according to applicable company requirements and specifications.

Responsible for step by step start up after shutdown with updated black start procedure.

Responsible for performance test on emergency diesel generator (EMDG) & essential diesel generator (ESDG)

Fault identification and first-line troubleshooting of the Solar Gas turbine and auxiliaries.

Carrying out plant operational procedures like Startup, Shutdown, Switching and Synchronization.

Restart platform from black start and ensure permit to work (PTW) is effectively implemented.

Routine inspection & preventive maintenance of electrical equipment in the crude production, gas & water injection facility-FPSO

Fault identification and troubleshooting of the Gas turbines on the turbotronic 3 Panels.

Testing of LV installation, continuity test of protective conductors, continuity test of ring final circuit, insulation resistance test, polarity test, earth electrode resistance test.

Lead Electrical/Instrumentation Engineer: E&I Construction. (Egina - Total FPSO)

Company Name: Samsung Heavy Industries (SHI)

Dates Employed: May 2015 – Feb 2018

Location: Ladol Mega Construction Industry, Lagos, Nigeria.

Prepare and review procedures for power and instrument cable pulling, management, glanding and termination for the entire FPSO.

Generate new electrical drawings (e.g. plans, isometrics, support details, etc) using PDMS and Auto CAD, either based on own information gained from site or provided by discipline engineers.

Specification and design of electrical devices, including datasheet creation.

Raise MTOs for electrical and instrument cable trays and support for production control unit.

Provide modification with respect to change order and also generate As-built drawing for stakeholders approval.

Create details electrical and instrument design and drawing with specifications, input and output (I/O) and Instrument lists, loop diagrams, instrument wiring diagram, cables schedule, block diagrams, data sheets.

Coordinate works with the Contractor and subcontractors, with classification / certification entities to define and implement all the requirements in the electrical and instrumentation systems,

Contribute to evaluation of engineering, procurement, construction, installation and review of Contractor and Subcontract’s engineering and Vendor as related to electrical and instrumentation systems,

Supervise and promote cost-saving solutions in the design of the company’s facilities, including promotion of alternatives for electrical and instrumentation design to optimize the works,

Assists in the development of maintenance and operating procedures for electrical/instrumentation equipment.

Provide guidance and troubleshooting for field/construction issues with instrumentation

Provide guidance internally and to clients on type of instrumentation needed in process

Develops instrumentation/low voltage electrical equipment specifications and associated reliability improvements/upgrade plans for that equipment

Provides technical support for front-end development, cost estimation, design, construction, and startup for projects and change packages

Partake in the electrical area classifications and also provide methods of satisfying the requirements of equipment installations in hazardous areas.

Carryout electrical maintenance system and installations procedure pertaining to HV, MV, LV, equipment like draw-out circuit breakers, switch gears, switch boards, distribution board, motor, variable speed drives etc.

Electrical Supervisor: OFON PHASE TWO PROJECT

Company Name: Snef Groupe Services Limited

Dates Employed: Jun 2013 – Apr 2015

Location: TOTAL FIELD OPERATIONS, Nigeria.

Electrical/Instrument installation on Onshore for Total EP&C (TEPNG) field Obagi flow station. Transfer of electrical consumers from old GP substation to new electrical substation (phase1) ELE-OML58-JVOPS-MTS-SOW-1149.

Provide electrical drawing for proper installation with respect to company’s standard.

Plan and Supervise Multi-skilled Technicians in performing electrical installation, maintenance, and repair work on High and low voltage: 11kv-3.3kv and 400v network.

Develop spread sheet for cable and tubing tray support selection.

Modify existing E & I equipment layout and check E & I drawing for conformance to project specifications.

Review instrument block diagram for instrument tubing installation, Fire and Gas systems.

Implementation of P&ID design for installation of field instruments for flow, level, pressure and temperature.

Prepare and review procedures for power and instrument cable pulling, management, glanding and termination.

Use company e-tools to retrieve technical documents and management of packing list, BOQ and drawings.

Locate and repairs defects in electrical systems, which involves the performance of difficult electrical tasks;

Reviews for accuracy the written work of others, such as time cards, mileage sheets, and work report;

Supervision of installation of Security and Safety Systems (ELV Systems): Fire Detection System, Access Control System, Digital Lighting, Security Synchronization System (PAGA), UGCIS, IP CCTV, Fire Central Management System interface (CMSI), Intercom System, FM200.

Good working Knowledge with Siemens S7-300, Allen Bradley PLC.

Electrical Maintenance Engineer

Company Name: Prime Atlantic Cegelec, Nigeria

Dates Employed: April 2011 – April 2013

Fault identification and first-line troubleshooting of Model Series 5001 GE Frame 5 Gas turbine and auxiliaries.

Fault identification and troubleshooting of the Gas turbines on the Mark V/Mark VI Panels.

Preventive Maintenance and troubleshoot of LV & HV equipment like process deck light, helli deck parameter light, sea water lift panel, crude oil export equipment, water circulation motor, Electrical panels and lighting, repair & replace of 11KV/690V /400V/230V Transformer, sea water jockey pump, Electro chlorination unit (ECU), Compressors, Fire water pump, washing machine, Dryer and boiler.

Support the efficient operation of the Plant through effective use of Engineering/Facility Maintenance resources.

Preventive Maintenance and troubleshoot of 400Vac/230Vac/24Vdc Rectifier, Chargers, UPS and batteries.

Contribute to the development of maintenance policies, strategies, plans and programs.

Prepare report, analyze data and make recommendations for improvement of plant operations.

Open and close work permits and follows up as required also dherence to all electrical safety rules.

Implement approved preventive and predictive maintenance plans and programs to ensure the availability, reliability, efficiency of equipment.

Inspection and maintenance of earthling and lightning protection systems.

Electrical Isolation of Low Voltage & High Voltage cells, Lock out and tag out (LOTO).

Monitoring of Equipments operation using Power Distribution Control System (PDCS) & Unit Control System.

Safety Integrated test (SIT) & troubleshoot of Emergency Diesel Generator (EDG).

Electrical Design Engineer

Company Name: Tombim Services Limited

Dates Employed: December 2009 –March 2011

Location: Esso Plat form - ExxonMobil Field Operation

Basic Engineering & FEED covering the Basic Design Report, Data sheet, Single Line Diagram AC & DC system, Equipment rating, Cable sizing Calculation, Cable Schedule, Lighting design, Cable Tray layout, UPS system, Typical protection system and schematic diagram for HV and LV system.

Design with specifications, I/O and Instrument lists, cables schedule, block instrument wiring diagram.

Preparation of Instrument Hook ups (Installation details), Instrument Location Layout/ Loop Drawings, Instrument Tubing and Cable Layouts, Instrument Junction Box Layouts, Instrument Logic/Block Diagram

Supervision of installation of Security and Safety Systems (ELV Systems): Fire Detection System, Access Control System, Digital Lighting, Security Synchronization System (PAGA), UGCIS, IP CCTV, Fire Central Management System interface (CMSI), Intercom System, FM200.

Generate reliable, robust design solutions from technical requirements specification, whilst minimizing cost.

Installation, testing, repairing, and modifying of equipment including LV & MV circuit breakers, power/distribution transformers, switchgear, protection relays, and Maximum Demand Meter.

Drafting / Interpretation of loop diagram and Process and instrumentation design (P & ID).

Development of work order, purchase order, requests, preventive maintenance with the use of CMMS to carryout installation of equipment; perform maintenance, repair and testing after installation.

Designing of cable tray and its room arrangement for every panel for electrical power distributing lines.

Creating, editing and interpreting facility engineering drawings and make necessary modifications or recommendations, like PDMS, P&ID, Auto CAD, CAD drawings.

Development of shop drawing, isometric drawings, As-built drawing and provide MTO checking.

Mantrac Nigeria Limited: Port Harcourt,

Epoch: October 2008– December 2009

Designation: Trainee Engineer

Carrying out installation for cabling, earthing/grounding, generators, HV/MV/LV Electrical Distribution systems and panels, transformers, UPS systems, Automatic Transfer Switches (ATS), lighting and lighting controls, batteries and charging systems, overcurrent protection devices, metering and relaying, power monitoring systems, energy management systems and other related electrical systems, controls and devices.

Developed plant Layout design and Installation/maintenance of generators (caterpillar).

Shift Operation & maintenance of synchronized Diesel Engine, Gas Engine power plants of 2280KVA, generating 8MW Capacity.

Sizing of Generators, Switchgears, Transformers, Motors, contactors and cables.

Preparation Support of Cable list cable Schedule and Datasheets Generation.

Close Monitoring and hourly recording of KW loads, fuel consumptions, engine sounds, temperatures, pressures, leakage detection & plant auxiliaries to ensure proper performance of engines.

Inspection & maintenance of HV, MV & LV distribution panel & lighting panels.

REFEREES:

Engr. Asomie Oni, Director of Operations, Azimarine Limited, Lagos State, Nigeria. Tel: 070********.

Engr. Okon Essien, General Manager, Tombim Services Limited, Port Harcourt, Tel: 080********.

Contact this candidate