Summary of Qualifications

Professional: Possesses 4 years as a Staff E & I Department Lead, 7 years Lead E & I Engineer, 4 years as a Senior I & E Project Engineer and 16 years of experience as a Lead E&I Design Engineer and Controls Engineer / I & E Design Supervisor; background includes the installation of Honeywell distributed control systems. As an E&I Project Lead to coordinate, direct and oversee project implementation and development. Adept in preparing project schedules and supervising project personnel.

Technical: Control system proficiencies encompass Honeywell DCS Systems; Allen-Bradley; Delta V; Bailey; Reliance; Modicon; Texas Instruments; and Anetec. Computer skills include Microsoft Word, Excel, and Access as well as Honeywell DCS Hardware. Proficient in specifying electrical and instrumentation equipment for use in hazardous zone rated areas.

See “Technical & Document Expertise” section at right for details of experience for individual documentation in engineering and design activities.

Key Accomplishments

Reduced rework in field construction by implementing stricter quality control checks.

Played a key role in completing projects on time and within budget, resulting in additional work from clients.

Was Honeywell’s sole employee to receive a Shell Oil Quality Award. Also received a number of Honeywell awards and accolades.

Contributed as a member of an engineering and construction team that brought in a large-scale project—using a new process—under budget and ahead of schedule, enabling Raytheon Engineers & Contractors to receive a bonus of $1M+ and an additional upgrade project.

Reduced engineering costs by providing training to entry-level designers.

Commended by a client for significantly reducing engineering time and construction costs.

Career Track

S& B Engineers and Constructors

Instrument Specialist Vll (June 2017-September 2020) Lead Design Supervisor for major project for Phillips 66 refinery in Sweeny, TX for a new FCC Gas Plant Unit addition and a revamp of an existing Gas Plant Unit. Provided project coordination, scheduling, progress reporting, supervision, and conceptual design in developing detail engineering packages for construction. Coordinated design tasks, planned their sequence, checked engineering construction packages and supported field construction efforts. Performed P&ID verification, FEL surveys and field check-out. Client interface with engineering construction package reviews. Scheduling project work for engineering work cycle and coordination with other disciplines. Also, to include leading small projects group in designing & checking of P66 small projects in electrical, instrumentation and controls. Design and checking of Enterprise Frac projects for electrical, instrumentation and controls. (See “Technical & Document Expertise” section).

Process Technical Services

Lead I&E Design Engineer (March 2017-June 2017) Assigned to Honeywell for Invista Petrochemical located in Victoria, Texas to upgrade control system. Review and evaluate existing control systems by field verifications and surveys to implement existing I/O into new Honeywell C300 control system. Responsible in designing power system, marshalling the I/O in panels. Integrating existing system

With hot cutover responsible for developing constructability installation plans and cutover procedures for keeping system online during implementation of new control systems. (See “Technical & Document Expertise” section).

PMCM Consulting Engineers

Senior E&I Project Engineer (November 2015-March 2017) Assigned to Honeywell for the City of Los Angeles Bureau of Sanitation to upgrade control systems to waste water treatment facilities for their plants. Responsible for evaluating all their existing installations to incorporate existing and new I/O signals to Honeywell C300 cabinets. Review and evaluate existing control systems by field verifications and surveys. Due to the existing complexity of integrating existing system with hot cutover responsible for developing constructability installation plans and cutover procedures for keeping system online during implementation of new control systems. Responsibilities included the designing of marshaling cabinets to interface with Honeywell C300 cabinets. Design and specify fiber optic communication network for plant wide communication with central server room, local PCM’s and other external control systems to integrate Process Control System to central control room. Engineering and design, specify equipment and supervise installations for Eaton UPS systems for backup power for control room to consoles, central server system and local PCM’s (C300) control systems along with detailed design for supplying power to UPS systems. (See “Technical & Document Expertise” section).

Jacobs Engineering Group

Control System Engineer V (August 2015-November 2015) Part of task force on a Front End Loading (FEL) for MEGlobal EG grass roots plant. Responsible to develop and design process control system communication network for common shared power and communications components that will be required to support DCS equipment for the process monitoring and control, mechanical equipment packages, MCC, Analyzer Shelters, Central Control Room equipment, Field Termination Room equipment, and OPS equipment.

Sofec

Lead E&I Engineer II (November 2008-July 2015) Lead E&I Engineer assigned to TULLOW TEN FPSO project located off the coast of Algeria. Previous project OSX-3 FPSO project as Lead E&I Engineer located off the coast of Brazil and previously the Lead E&I Engineer for the BP FPSO project located off the coast of Angola for E&I engineering and design of external turrets. Responsible for all the project coordination for E & I engineering and design based on scheduling and procurement requirements. Responsibilities and engineering to include but not limited to the following: progress reporting, supervision, P&ID verification/development, Cause & Effects, control system write-up’s, bid analysis, specifications, electrical power distribution, and electrical and instrumentation specifications & data sheets. I was directly responsible in the conceptual design to develop detail engineering installation packages for construction. Also perform FAT’s at suppliers for package units with checkout and approval of electrical equipment. Interfaced with construction team for field installation of equipment to include FAT’s, commissioning and troubleshooting during construction onsite. Also coordinated engineering and developed the controls for vendor package units including FAT’s at vendor facilities.

Expro Americas

Senior Staff E & I Department Manager (July 2004 – November 2008) Provided project coordination, client reviews, control systems, FAT (Factory Acceptance Test) with client scheduling, progress reporting, supervision, P&ID verification/development, Cause & Effects, control system write-up’s, bid analysis, electrical and instrument specifications and conceptual design in developing detail engineering packages for construction. Engineering are for upstream oil production facilities with wellsite control. Production facilities to include the following: Exxon EPF (Early Production Facility) with Well Site and Pipeline monitoring and control at Sakhalin Island in Russia, an Early Production System for Chevron in Nigeria and a process module on a FPSO for Petrojarl to be located in Brazil. A FPSO production system for Petrojarl/Tekay engineered and constructed in Netherlands and Poland to be delivered and on line production for Petrobras in Brazil. Assigned to client’s field cutover team to perform SAT to cutover deliverables of process equipment.

Honeywell

Senior E & I/C Project Engineer (2000 – July 2004) · Lead E & I/C Design Engineer (February 1998 – 2000): Coordinated all aspects of the project lifecycle, including client presentations and reviews, scheduling, quality checking, and providing conceptual design for the development of detail engineering packages. Planned design task sequences for design personnel preparing engineering design construction packages in control, instrumentation and electrical for distributed control system modernization projects.

Served as lead field engineer in the development of FEL packages; performed field installation check-out, loop check, and onsite design; supervised construction contractors in construction implementation and start-up.

Raytheon Engineers & Constructors

Instrumentation / Controls Design Supervisor (February 1991 – February 1998): Provided project coordination, scheduling, progress reporting, supervision, and conceptual design in developing detail engineering packages for construction. Coordinated design tasks for designers, planned their sequence, checked engineering construction packages, and supported field construction efforts. Performed P&ID verification, FEL surveys, and field check-out; supervised contractors throughout installation, loop check-out, onsite design, and start-up.

Some employers prior to 1991 included Siemens-Allis, Mead Paper Corporate Engineering, Brown & Root, Jacobs Engineering, and Davy McKee.

Education

Electrical Design & Engineering Course, Polk Vocational; Accounting and Business Administration, Polk Community College; AutoCAD, Travis Technical

Project Addendum

Oil and Gas (Upstream and Downstream)

TULLOW Ten (External Turret with MODEC FPSO)

OSX-3-Brazil (External Turret with MODEC FPSO)

BP-Angola-Block 31 (External Turret with MODEC FPSO)

Pemex-Well test (Offshore Production Facility)

Petrojarl/Tekay-FPSO (Petrobras Offshore Production Facility)

ExxonMobil –OPF (Onshore Production Facility)

Chevron – EPS (Offshore Production Facility)

TransAmerica – Refinery Revamp

Unocal – Mid-Barrel Hydrotreaters Revamp

Motiva – Distilling Unit Revamp and Automation

BP – Deep Water Platforms (Above and Subsea)

Environmental

Citgo Petroleum – Wastewater Treatment

Commonwealth Edison – Wastewater Treatment

City Of Los Angeles – Wastewater Treatment

Pulp and Paper

Mead Pulp & Paper – Paper Machine Addition

Mead Paper – Imaging Paper/Coating Project

International Paper – 2,000 TPD Unbleached Kraft – Linerboard Mill

Pharmaceutical

Gist Brocades – Pharmaceutical Plant

E.I. Lilley – Pharmaceutical Plant

Aerospace

Williams International – Development of Test Cells for Turbo Fan Engines

Martin Marietta – Manufacturing Complex

Chemical and Petrochemical

Shell – Phenol, Olefins (3), and Alcohol

Fina – Plastics

GE Silicones – Siloxane Expansion Project

ICI Americas – HFC Refrigerant Project and HFC Refrigerant Upgrade

The Ink Co. Inc. – Specialty Chemicals Plant (Inks)

GE Plastics – Automation of Plastic Extrusion Lines

Englehard Corp. – Automation of Specialty Chemical Plant

RJ Reynolds – Cigarette Plant Revamp and Automation

Texasgulf Chemical – Phosphoric Acid Plant

W.R. Grace – Phosphoric Rock Beneficiation Project

Olin Chemical – Explosives Plant

MEGlobal EG – Ethylene Oxide

Material Handling

Lower Colorado River Authority – Bucket Wheel Strip Mining and Material Handling Project

Siemens-Allis – Electrical Equipment Manufacturing Plant

Texas Gulf Chemical – Shipping Port Upgrade

Power Plant

Commonwealth Edison – Nuclear

Lakeland Power – Coal-Fired

Dallas/Ft. Worth Power – Coal-Fired

Entergy – Natural Gas

Great River Energy – Coal-Fired

Technical & Document Expertise

· Material Cost Estimates

· Instrument Location Plans

· Material Specifications

· Motor Schematics

· One Line Diagrams

· Conduit & Cable Sizing & Schedules

· Electrical Panel Design

· Power Distribution

· Load Studies

· Power & Cable Tray Design

· Control Narratives

· Control Panels

· P&ID’s

· Loop Checking

· Control Panel Layouts & Details

· Elementary Diagrams

· Air Connection Diagrams

· Instrument Indexes & Databases

· Facilities Designs

· FEL Surveys

· Loop Wiring Diagrams

· Control Wiring Diagrams

· Installation Details

· Ladder Diagrams

· DCS & PLC Systems

· Marshaling Cabinet Layouts

· Debugging Systems

· Estimates & Proposals

· Field Construction Supervision

· Field Construction Start-Up

· Field Installation & checkout

· FAT’s Factory Acceptance Test

· Control Write-Ups

· Cause and Effects

· Instrument Data Sheets

· I/O List

· Project Specifications

· Electrical Data Sheets

· Electrical Material Selection

· FAT’s Factory Acceptance Test

Contact this candidate