RESUME

Post Applied For : DRAUGHTSMAN

P e r s o n a l I n f o r m a t i o n .

Name : Prakash Bandu Pawar

Permanent Address : Room No. 101, House No. 1623, Koparigaon Sec. 26A Vashi Navi Mumbai, India. Pin. 400703

Telephone : +91-993******* / +965-******** / +91-989******* Date of birth : 01th June 1984.

Sex : Male.

Nationality : Indian.

Marial status : Married.

Passport No. : K5291427.

Place of Issue & Expiry : Kuwait & 08-05-2022.

E-Mail Address : adlj56@r.postjobfree.com / adlj56@r.postjobfree.com E d u c a t i o n a l & P r o f e s s i o n a l Q u a l i f i c a t i o n .

NCVT in Mechanical Draughtsman (1 Year) from Govt. Industrial Training Institute, July 2001.

Mechanical Draughtsman (2 years) from Govt. Industrial Training Institute, July 2000.

Design Experience in Equipment Design software in COMPRESS.

Drafting Experience in AutoCAD & Microstation.

Knowledge of MS office.

Total W o r k E x p e r i e n c e s .

I possess more than 15 years work experience in Pressure Vessel Industry for the Preparing Fabrication Drawing for Cladded / Non Cladded Vessels & Columns with the following reputed and multinational companies in Kuwait, Saudi Arabia as well as in India. S t r e n g t h s

Ability to take full responsibility of Equipment Drawings Preparation & Checking works as per the Client requirements, Codes & Standards.

A Practical & Systematic Approach, Problem solving skills, good communication and organizational skills.

Good Visualization / Imagination power, Patience, Consistency, Team Working Skills & Positive Attitude.

Page 2 of 4

Work E x p e r i e n c e Details .

1) Company : John Pickle Middle East, A Div. of Kuwait Pipe Ind. & Oil Gas Services (KSC) Kuwait.

Department : Engineering

Status : Draftsman

Period : May 2011 to March 2020.

C o m p a n y P r o f i l e .

An ISO 9001 Certified and holding ASME U, U2, PP, S, R & NB Stamps. Manufacturing of Pressure Vessels, Columns, storage tanks, Piping skid, pig launchers,Desalters and other process equipments for various refinery, petrochemicals units, oil and Gas industries, Fertilizer, chemical and power plants as per international codes like ASME/ASTM. Interaction With Internationally Reputed Clients / Consultants Like KOC, KNPC, SKEC, Petrofac, Technip, CCC, Tecnimont, Daelim, FWI, MECC, Etc.

2) Company : BILFAL HEAVY INDS. LTD, AL- JUBAIL, K.S.A. Department : Engineering

Status : AutoCAD Operator

Period : March 2006 to April 2011.

C o m p a n y P r o f i l e .

Manufacturing of Pressure Vessels, tall columns, Heat exchangers, storage tanks, spheres and other process equipments for various refinery, petrochemicals units, oil and Gas industries, Fertilizer, chemical and power plants as per international codes like ASME/ASTM/TEMA. Bilfal has been serving the major engineering companies such as Aramco, Snamprogetti, Bechtel, Chiyoda, Fluor, Mitsubishi, Lummus, Toyo, etc. This Organization is one of the leading International Heavy Engineering Industries, which has approval of ISO 9001, ASME CODE STAMPS and approved by all Third Party Inspection Agencies.

3) Company : P-Mech Consultant PVT. LTD. Mumbai, India Department : Engineering

Status : Mechanical Draughtsman

Periods : March 2005 to April 2006.

C o m p a n y P r o f i l e .

P-Mech Consultant PVT. LTD is Designing Consultancy in the field of Oil & gas, Petrochemical, Power Projects, Construction projects & Desalination Plant Evaporator system. 4) Company : Larsen & Toubro LTD, Mumbai, India

Department : Engineering

Status : Mechanical Draughtsman

Periods : From January 2004 to March 2005.

Job P r o f i l e .

Worked on Project : 445 MW Konaseema Combine Cycle Power Plant & 388.5 MW Vemagiri Combine Cycle Power Plant.

Generated detail drgs for the followings :

Detail drawing for vertical HRSG (CMI type ) Exchangers Modules.

Mechanical design drawings for Drum, Exchangers, tubes & headers.

detail casing drawing for vertical HRSG (CMI type) Exchanges Module casing. Page 3 of 4

Fabrication drawings for HRSG steam Drum.

Detail drawing for HRSG Duct assy. & fabrication drawing.

Checking vendor fabrication drawings.

5) Company : Godrej & Boyce Mfg. Co. LTD. Mumbai, India Department : Engineering

Status : Mechanical Draughtsman

Periods October 2002 to January 2004.

C o m p a n y P r o f i l e .

Operating in conformance to quality system Standard ISO 9001 : 2000 is specialized in detailed design, Manufacture, Fabrication & supply of large heat Exchangers, Pressure Vessels, Columns, Reactors, Spheres etc.

D e t a i l o f J o b P r o f i l e :-

Basic knowledge for Design of Pressure Vessels (As per ASME Section VIII Div. I & II).

Preparation TDC’s for pressure parts and non-pressure parts based on Code and Specs.

Prepare and Checking Material Take-Offs for Estimation / Procurement Department.

Study of Mechanical data sheet, drawings, specification & all other data provided by client.

Basic knowledge of API 620 & 650, TEMA.

Preparation of General arrangement Drawings for Pressure Vessels, Heat Exchanger, Columns & Storage Tanks.

Preparation of detailed fabrication drawings for Internals & Externals assembly.

Preparation of detail drawings for Self Reinforced Nozzles.

Preparation of Bill of material for the above drawings.

Preparation of tube layout for various passes.

Preparation of Surface Development, Platform, Supp. Cleat & Ladder details drawing for Column.

Structural drawings like Platform & Ladder Assembly and Detail Drawings.

Preparation various type pipe support fabrication drawings.

Design & drawing of Pig Launcher / Receivers (As per ASME Section VIII Div. I / ASME B 31.4 / 31.8).

Preparing drawing of Jib Cranes & Pig Trolleys.

Preparation of engineering drawing/mechanical datasheet for the equipment.

Material Take-offs for Piping Isometric Drawings

Hands on Experience with design software : Compress.

Conversion of drawing from Auto Cad to Microstation. Project Coordinator Job summary :-

Review the project file ( PO, budget, contract, specification, etc) and distribute to other department for further process.

Issue the material requisition to for purchase and follow up.

Follow up with Engineering & QA/QC for documents submission for approval.

Review the quote received from material supplier, coordinate with purchase to place the order for material.

Page 4 of 4

Follow up with supplier for on time delivery of materials.

Arrange the Kick of meeting & Vendor pre-inspection meeting (VPIM) with clients.

After receipt of document approval coordinate with manufacturing department to further process.

After receipt of material arrange client inspection for the same prior to start the fabrication.

Arrange the client Inspector as per ITP stage inspection during fabrication.

Sent request to Finance department to arrange the stage payment invoices as per the Purchase Order.

Submit the invoice to client and follow up to release the payment.

Follow up with manufacturing department for timely completion.

Prepare the job close out summary and Project general information / Sequence of events Planed and actual.

Current Job Details

Expected Salary : Negotiable

Notice period : Immediate.

I hereby declare that, all above information is true and to the best of my knowledge. Yours Sincerely,

( Prakash Pawar )

Contact this candidate