Vishnu S Nair
QA/QC Inspector
(Oil & Gas Contracting Co. /onshore)
“Dynamic Certified QC/Inspection Professional with proven track record and 8 years
Experience in QA/QC Welding,piping and fabrication Supervision
PROFILE SUMMARY
Fabrication/Erection -Oil & Gas (Oil & Gas Contracting Co. /onshore)
QA/QC/welding&piping Inspection professional with 5 years’ Experience in:
Inspection Codes & Standards Non Destructive Examination
QA/QC Control Materials Consumables
Conducting Tests Witnessing & Reporting Monitoring & Control
MS-Office Safety Preparation & Reviewing
Handled projects of Clients such as ADCO, ADNOC, KNPC, EIL, BPCL etc.
Familiar with international codes and standards like ASME II, V, VIII, IX & B31.3
Carry out inspection activities in line with projects requirements includes approved
method statement, inspection test plan as per approved procedures.
Excellent-knowledge in MS-Office
WORK EXPERIENCES:
Since June 2020 QC Inspector, M/s. Santhi Construction Chavara
Client : Kerala Minerals and Metals (Kerala Govt:)
Project: AMC for Structure & piping Replacement, Painting
Job Responsibilities
Carrying-out Inspection activities with the consultant / client as per QAP & ITP
requirements
Preparing & Conducting PQR (Procedure Qualification Record)
Conducting welder qualification test as per applicable Welding procedure specifications.
Inspection of receiving materials and consumable, reviewing MTC reports
Inspection of consumables and storage handling as per welding consumable procedure
and WPS.
Fit up inspection before welding for bevel angles, root face, root gap as per WPS.
Visual inspection on finished welds and prepare daily welding reports.
Co-ordination of Non Destructive Examination Preparing weekly reports of welding
Progress, repairs and etc. are in MS-Excel sheets.
Well knowledge and inspecting the various materials like CS, LTCS, SS, Inconel, etc.
May2019 to January 2020 QA/QC Inspector, Nasser Saeed Al Hajri
& Partners Contracting Co.Kuwait.
Nasser S. Al –Hajri Corporation (NSH) established in 1978, NSH work with all major international clients and the customer profile includes Saudi Aramco, SABIC & its affiliates, Qatar-Gas, Ras-Gas, ADNOC, KNPC,KOC Sipchem, Shell, Exxon Mobil, Total, Qatar Petroleum, Oryx-GTL, Dolphin Energy, Tasnee, Chemanol etc. NSH has achieved a “GRADE A” rating as a general contractor by the Saudi Arabian government.
Client: KNPC (Kuwait National Petroleum Company),Kuwait
Project: CFP Project (Clean Fuel P roject ),MAB1
Job Responsibilities
Coordinate between QA/ QC & Construction departments.
Material inspection
Pre-heating &PWHT arrangements and chart verification
As per isometricdrawing, welding & NDT Clearance
Co-ordinate and submit RFI to client inspectors as per Inspection & Test Plan.
For regular Inspection activities
Making punch list with client attending the same
Inspection of fit up and welding of joints.
Hydrotest witness with client
control of weld quality as per approved QC procedures and standards and maintain QC records
August 2018 to January 2019: QA/QC Inspector, Nasser Saeed Al Hajri & Partners Contracting Co.
Client: ADCO (Abu Dhabi Company for Onshore Petroleum Operations), UAE
Project: CPP Project (Central Processing Plant With Clusters and Remote Wells)
Job Responsibilities
Preparation, Review & approval of Inspection & Test Plan (ITP) Quality Requirements.
Fit-Up & Visual Inspection of Weld and Joints
Monitoring of Post Weld Heat Treatment (P.W.H.T)
Preparing the as built for Final Modification according to Site Conditions.
Final Clearance for Hydro Test Packages
Witnessing Hydro tests, Pneumatic test’s Through Client
Preparation of Final Documents for System Handover to Commissioning Team
Apri 2018 to July 2019: QA/QC Mechanical Inspector, Nasser Saeed Al Hajri & Partners Contracting Co.
Client: ADNOC(Abudhabi national oil compay)
Project: RRW-UR(Ruwais Refinery West-Unit Restoration) Project
Job Responsibilities
Installation & Inspection for Rotary Equipment include Padding, Elevation, Position, Orientation, Levelness, Pre.shaft alignment, Run-out, Void, Surveillance inspection .
Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, Loading of catalyst, chemicals, Support balls, Vessel Box-up.
Installation & Inspection of Air Fin Cooler & Air cooled surface condenser include Alignment of setting plate, structure, tube bundle, louver, shaft, pulley, Blade Angle, Tip clearance, Belt tension, pressure testing / Dew point inspection for tube bundles, solo run of motor, Completion of inspection records .
October 2015 toFebruary 2018: QC Supervisor, M/s. S.Thartius Engineering Contractors.
Client: M/s. BPCL LTD.Ambalamugal Kochi.
Project: AMC OF ALL CONE ROOF TANKS,FABRICATION OF TANKS & MAINTENANCE OF TANKS
Job Responsibilities
Material inspection
Inspect cutting laying of plates
Inspect Rolling/Bending
As per drawing, welding & NDT Clearance
Co-ordinate and submit RFI to client inspectors as per Inspection & Test Plan.
For regular Inspection activities
Visual Inspection
Hydrotest witness with client
control of weld quality as per approved QC procedures and standards and maintain QC records
September 2014 to October 2015: Assitant Engineer, M/s.Aarkay Erectors Pvt.Ltd
Client: M/s. BPCL LTD.Ambalamugal Kochi.
Project: MAINTENANCE OF TANKS
Job Responsibilities
Material inspection
Inspect cutting laying of plates
Inspect Rolling/Bending
As per drawing, welding & NDT Clearance
Co-ordinate and submit RFI to client inspectors as per Inspection & Test Plan.
For regular Inspection activities
Visual Inspection
Hydrotest witness with client
control of weld quality as per approved QC procedures and standards and maintain QC records
September 2012 to April 2014: Assitant Engineer, M/s.Sharp Tanks and Structurals Pvt.Ltd
Client: EIL/CEIL/FERNAS, Gujarat
Project: OPAL DFCU&AU O-DAHEJ Gujarat
Job Responsibilities
Execution of the structure fabrication jobs
obeying the safety rules in site
Conduct daily tool box meetings
To check the fabrication drawing and instruct to our subordinates
Co-ordinate with QC activities in our QC Engineers and Inspectors
Co-ordinate with billing activities
Obeying client instructions for good working activities
DECLARATION:
I hereby declare that the above furnished particulars are true to the best of my
knowledge and belief.
pathanapuram: Vishnu S Nair
DECLARATION:
I hereby declare that the above furnished particulars are true to the best of my
knowledge and belief.
Date:
Abu Dhabi: Ajin K Salim
Preparation, Review & approval of Inspection & Test Plan (ITP) Quality Requirements.
Fit-Up & Visual Inspection of Weld and Joint
Monitoring of Post Weld Heat Treatment (P.W.H.T)Ø
Preparing the as built for Final Modification according to Site Conditions.Ø
Final Clearance for Hydro Test Packages.Ø
Witnessing Hydro tests, Pneumatic test’s Through Client.Ø
Preparation of Final Documents for System Handover to Commissioning Team .Ø
Preparation of inspection reports submit the client.Ø
Piping Line Installation inspection with reference to Isometric DrawingsØ & P&ID
To Inspect the Fit-Up, Weld visuals, DimensionalØ & Planarity, Equipment Alignment
Inspection of Pipes, Isolation ValvesØ & Pipe Fitting’s for Visual, Dimensional,
Conduct WQT(welder qualification test) as per Welding Procedure Specification (WPS).Ø
To monitor welders to ensure all welding works are carried out as per Approved WPS and Requirements.Ø
Inspection of Structural Material’s, Pipe Fitting’s for Visual, Dimensional, MechanicalØ & Chemical properties.
Updating of the Isometric Drawings in according to Services and Site Conditions.Ø
Line checking and preparation of punch listsØ
Pressure gaugesØ & Pressure safety valve (PSV) during Hydro test & reviewing calibration certificates of the same.
Witness testing activities
Reinstatement activities
Installation & Inspection for Rotary Equipment include Padding, Elevation, Position, Orientation, Levelness, Pre.shaft alignment, Run-out, Void, Surveillance inspection during erection and welding of Piping, Pipe Strain, Motor / Turbine solo run, Final shaft alignment, Prep. of Graph, P&ID Verification, Lube oil Flushing Inspection, Mechanical Running test, Completion of inspection records etc.
Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, Loading of catalyst, chemicals, Support balls, Vessel Box-up, etc.
Installation & Inspection of Air Fin Cooler & Air cooled surface condenser include Alignment of setting plate, structure, tube bundle, louver, shaft, pulley, Blade Angle, Tip clearance, Belt tension, pressure testing / Dew point inspection for tube bundles, solo run of motor, Completion of inspection records etc.
Witnessing and sentencing of all site inspections within their disciplines
Coordinate all site inspections with the site subcontractors
Ensure that all inspection reports are accurate and that all attached documents are current status
Ensure all work is correctly prepared prior to any inspection being undertaken
Review all inspection reports for compliance
Assist the site QC manager in the organisation, maintenance and control of the quality system
Liase with the site construction engineers and provide assistance when requested
Prepare nonconformance reports to the QA manager and assist in developing corrective actions
Assist the QC manager and construction manager in resolving any discrepancies and ambiguities
Coordinate with the customers QC inspectors for the resolution of site problems
Coordinate with the site subcontractors to ensure that communications exist and are maintained
Assist the site subcontractors in the resolution of drawing interpretation
Attend the weekly QC meetings
Review work procedures and method statements for compliance with good work practices and the customers contract specializations
The issuance of nonconformance reports in conjunction with the site QC manager
The completion of QC site instructions and coordinate their closure The review of inspection test packages during the course of construction activities
Compliance with the site’s health and safety regulations
CONTACT DETAILS:
Mob.Ph:+919*********
Email:adlen9@r.postjobfree.com
Skype:vishnu6485
CURRENT LOCATION
Kerala,India
CERTIFICATIONS:
CSWIP 3.1
Certificate No: 741963
TWI, UK
ASNT Level II
RT- Radiographic Test
LPT- Liquid Penetrant Test
MPT- Magnetic Particle Test
UT- Ultrasonic Test
EDUCATIONAL QUALIFICATIONS:
Diploma. in Mechanical
Engineering
PERSONAL INFORMATION:
Date of Birth : 24/08/1990
Permanent Address:
Nandhu Bhavan
Kalanjoor p.o, P.T.A
Kerala, India
Languages Known: English,
Hindi, Malayalam & Tamil
Nationality: Indian
Marital Status: Single
Passport No: S0061658
SOME OF PROJECTS HANDLED:
KNPC(Kuwait National petroleum company):
Contractor: Petrofac
Project:CFP
Clean Fuel Project
Kuwait
ADCO(Abu Dhabi Company
for Onshore Operators):
Contractor: Maire Tecnimont
Project: Al Dabb’iya Surface
Facilities CPP Project
(Central Processing Plant
With Clusters and Remote
Wells)
Abu Dhabi, UAE
ADNOC(Abudhabi national oil compay)
Contractor: GS E&C
Project: RRW-UR
(Ruwais refinery west-unit restoration)project
Abu Dhabi, UAE
BPCL
Contractor:THARTIUS ENG
Project:AMC FOR MAINTENANCE OF CONE ROOF TANKS)
Kerala, India
ONGC
Contractor:EIL
Project: OPAL DFCU&AU O- DAHEJ
Gujarat, India