CURRICULUM VITAE

K.SHANMUHANATHAN

Mob no. +91-978*******

adl5yr@r.postjobfree.com

Applied Post for: - Civil Engineer

PERSONAL SUMMARY

Bachelor's degree in Civil Engineering.

* *****’ experience in oil & gas, & Power Plant Construction field

4.6 years Approx. GULF experience( abudhabi, Bahrain)

GULF WORK EXPERIENCE:

1. Working at Sayed kadam aldurazi B.Sc. Bahrain from July- 2019, present

Employer: Sayed kadhem Al Durazi B.Sc.

Location: Bahrain.

Employment date: July, 2019,

Position : Construction (Civil Engineer)

Main Contractor: Electric power construction corporation (“SEPCO”)

Client : Haya power Desalination Company Bahrain,

Project : Al-Dur 2 independent water and power project (IWPP) in Bahrain.

Al Dur2 IWPP is an Independent Water and Power Project located at Al Dur in the Kingdom of Bahrain. The Plant shall be developed to generate 1,500 MW of Power based on Combined Cycle Gas Turbine(CCGT) technology and produce 50 MIGD of water through Sea Water Reverse Osmosis (SWRO) technology..

This project SEPCO under work Sayed kadhem al durazi company taken project

Excavation, Pcc, Backfilling, Electrical Duct bank, GRP Line huge area Sand filling.

AL- DUR II, Project Excavation difficult all area ROCK, So, we have to plan Excavation to dig Ground using Breaker & chisel

Huge area Backfilling layer by layer all Foundation 250mm and follow up compaction and take fdt test.

we have following Drawing and method of statement as per site instruction

Power plant, substructure underground all utilizes work.

2. Worked at Mechanical Contracting and services Company (MCSC) Bahrain from March- 2017 till date

Employer: Mechanical Contracting Service Company (MCSC) WLL

Location: Bahrain,

Employment date: March, 2017 to 2019

Position: Construction Civil supervisor)

Client: BLNGIT

Main Contractor: GS & E&C (Engineering, procurement, and construction.)

Project : Bahrain Liquid National gas Import Terminal port, area of Kingdom of Bahrain.

ORF (On Shore Receiving facility) New Plant, Blng project civil construction work for structural and maintains civil work.

We have below mentioned under take civil work this BLNGIT Project GS & EC EPC under MCSC sub contractor

The project calls for building berths for LNG carriers and floating storage units and regasification facilities.

The facilities will be linked through underwater and surface gas pipelines,

The EPC (engineering, procurement, and construction) project, which is worth 760 billion won (US$652.64 million), was commissioned by Bahrain LNG

Project undertaken by Bahrain's National Oil & Gas Authority (NOGA). GS E&C has worked with its principal contractor Bahrain LNG W.L.L. as an EPC partner.

Key Responsibilities:

Onshore Construction Work of Bahrain LNGIT

ORF&NPF, Fire water pipe line sleepers, AIR cooler system, security building, vessels tank Equipment foundation work

Analyze survey reports, maps, and other data to plan projects

Admin CCR Building, Pipe rack Foundation, Road cross duct bank, air compressor Foundation, Civil associated work

Building Structural steel& Form work and planning for coordinate with construction,

Substation civil structural work & Fire water tank foundation,

Equipment Foundation for structural work,

Air cooler System of Foundation,

Paving work Repair and maintained water proofing work,

NPF area for NITROGEN PROTECTION FACILITY, Civil work & planning for new plant making coordinate with civil construction work

Worked at Method of statement and QA/QC quality of work,

Ensure that civil Work belong to start to permit BLNG,

Pipe line Excavation and doing for civil construction work,

Concrete pouring planning and QA/ QC and following quality control,

Metering skid Foundation,

Good knowledge for IFC Drawings & execute construction work,

Site Engineer, Supervisor, Surveyor & QAQC personnel will ensure all works are being carried out in accordance with Construction Drawings and Specifications,

Follow MCSC QA/QC plan documents,

Manage the repair, maintenance, and replacement of public and private infrastructure,

Test building materials, such as concrete, asphalt, or steel, for use in particular projects,

Perform or oversee soil testing to determine the adequacy and strength of foundations,

Ware house Foundation planning and execution for civil work,

Trench Excavation & Build by Electrical trench & Instrument trench at onshore project,

Grouting work & specified material using for as site purpose,

3. Worked at Granite construction company abudhabi from March 2015 to April 2016

Employer : GRANITE CONSTRUCTION COMPANY LLC

Location : Abu Dhabi, UAE

Employment date: March, 2015 to April 2016

Position : Construction Civil Engineer

Client: GASCO Abu Dhabi gas industries ltd

PMC: Mott McDonald

Main Contractor: ETA

Project No.1: Substation 01in Habshan Plant – 31.5/40 MVA (Transformer compound)

Project No.2: Substation 24 in Habshan Plant –( Capacitor bank building)

Project No.3: Substation 21in Habshan Plant – 40/50 MVA

Responsibility to ensure that work activities are executed in accordance with the latest approved construction drawings, work specifications and related method statements

Ensure that the IFC drawings are available and properly executed at site for construction

Ensure that the materials use at site for permanent works are approved by the Client.

Coordinate with QC Inspectors and Construction staff to ensure that the field quality procedure is agreed and implemented.

Prepare and submit the weekly and Monthly progress reports to the Client.

Monitoring of all civil works ( Column, Beam, Slab and Foundation construction)

Excavation, backfilling and preparation of dewatering system

Prepare DPR ( manpower and equipment schedule)

Coordinate with the Quality Inspector to raise RFI and attend site inspection together with client

Participated in weekly client meetings to discuss technical issues. construction progress and preparing concrete pour plan for heavy building structures.

Safety Certified Trainings and Qualifications:

Breathing Apparatus, H2S E-Learning, Advanced Safety audit.

Hazardous Waste Management, Hazard Identification, Hazard Awareness.

Near Miss reporting, Scaffold Safety, Tool box technique.

PTW Holder as Performing Authority.

Scaffolding inspector

ROLE & RESPONSIBILITY:

Review of Project approved standards, specification & Engineering Isometric drawings, Working drawing and shop drawing.

Managing site supervision, site minutes & site correspondence independently, coordinating structural engineer and section manager.

Estimate quantities and cost of materials, equipment, or labour to determine project feasibility.

Checking all the reinforcement is as per shop drawing.

Direct or participate in surveying to lay out installations or establish reference point, grades, or elevations to guide construction.

Analyze survey reports, maps, drawings, blueprint, aerial photography and other topographical or geologic data to plan projects.

Rising RFI’s (Request for Inspection) to get approval from consultant after inspection as soon as possible to avoid any delay from our side.

Preparation of monthly valuation at the end of every month.

Checking the form work of columns, beams, slabs, and retaining walls with the help of level instrument.

Liaising with project manager and attending regular meetings to keep them informed of progress.

Estimation of quality according to the drawings.

Resolving any unexpected difficulties and other problems that may arise.

Check the bar bending schedule and site conditions prior to send the call off.

Coordinating with engineering department for civil engineering drawings.

Act as the main technical adviser on a construction site for subcontractors, crafts people and operatives.

Checking plans, drawings and quantities for accuracy of calculations

Ensuring that all materials used and work performed are as per specifications

Overseeing the selection and requisition of materials and plant.

To follow all quality control procedure, inspection and test plan.

Weekly & Monthly Minutes of Meetings (MOM) and weekly progress reports.

Monitor performance of sub contractors, ensure personnel are qualified and competent to perform allocated tasks, have valid certifications were for the techniques in use.

Mentored team members and monitored workflow and progress to ensure standards and schedules were met.

Good communication skills coupled with teamwork, problem solving, management and leadership. (Technical writing skills.)

Checked and reviewed construction drawings to reflect actual site arrangement

Checking and witnessing site concrete sampling, concrete cube sampling for compressive strength tests.

Witnessing site slump test, concrete temperature checking prior to pouring.

Regular inspection towards the ongoing work and maintaining a process flowchart.

After completion of works final inspection to be done up to satisfaction.

Inspection of all safety and technical term in the site.

Discussion of all hazard identified at site and excavation work to working team.

Resolve the issued Non Conformance Report.

Technical meeting with the client.

To make sure that the project is going on as per client’s standards, specification & schedule.

Prepares report of activities.

Participation to the meetings of the Production Department in order to establish the priority operations;

Daily organization of the safety toolbox;

Daily progress in quality conditions with the required standards.

Identifying what are the available materials in the general store and inform the leader men.

Coordinates with clients and third party inspection agencies for carrying out inspection.

Assist manager for preparing relevant progress report.

Does preliminary inspection before QC inspection and consultant final inspection.

Application and monitoring The work according to the procedures

Study Of shop drawings to carry out workshop on Site & Subcontract inspection as per specification standards/Codes

Inspection and storage of Various Consumables And Non Consumables materials

Coordinate With Other Departments Such As Production, Planning, Store & Purchase to meet the target ( completion of project on time)

Learning & Implementation Of Standards & Engineering Codes According to the Job Specification And Requirements

Offering Inspection to the Third Party Inspectors.

Perform compaction test of soil by use of nuclear densometer

Responsible to analyze proper inspection and validate results.

Manage work inspection schedule to meet requirements.

Performs Non-Destructive test for concrete.

Initiate non-conformance report for non-conforming products and prepare report evaluation.

Demanding workers to provide a good quality work and checking that all workers have the complete safety work equipment (overalls, gloves, glasses, helmets, safety harness and adequate tools).

INDIA WORK EXPERIENCE:

4. Employer : M/s united techno project private limited,

M/s Lal construction,

M/s Nirman Encon project pvt ltd,

Location : Bangalore, INDIA (Work at Bangalore, ASC CENTER

Employment Date: August 2013 – March 2015

Position : GET (Graduate Engineering Trainee) Civil Engineer

Client : Military engineering service (Central Government project)

Project Title : Provision of klp OTM Accommodation (SF) BN (PH-1)

Officer mess & Admin block

Storage& Accommodation

OHT Water tank Strurual Work

Guard House,cook house, servant quarters,

Sump house and Road Work for military Engineering services

Good knowledge for Residential building and commercial building structural work

MES standard for concrete and structural civil construction work& quality control.

PROFESSIONAL QUALIFICATION

PSN Engineering College, Tirunelveli, Tamilnadu, India.

2009 -2013, 68.1% (first class)

Grade point

COMPUTER SKILLS

Package : MS-Office

Operating Systems : Windows Xp, 7, 8

Other : AutoCAD (Civil)

PERSONAL PROFILE

Father’s Name : M.Kasi

Permanent Address : Amerthapuram street, salaigramam,

Ilayangudi talk, Sivagangai Distric

Tamilnadu (India)

Mobile no : +91-978*******

Email : adl5yr@r.postjobfree.com

AGE : 28 years

Nationality : Indian

Marital Status : married

Language Known : Tamil, English, Hindi

DECLARATION

I hereby declare that the above information is up to the best my knowledge and belief. I bear the responsibility for the correctness of the above-mentioned particulars.

Date:

Place: (K.SHANMUHANATHAN)

Contact this candidate