*** ******* **** **

Calgary, AB, Canada T*Y *L*

Tel: 403-***-**** (Home)

Email: adl5fa@r.postjobfree.com

INSTRUMENTATION AND CONTROLS ENGINEER with more than 15 years of industrial experience in process instrumentation and control design and engineering from conceptual to detailed design, including project instruments specification development, P&ID development, PHA&HAZOP, cost estimate, instrument selection and sizing, instruments index and data sheets, material requisition, bid evaluation, vendor drawing review, control system configuration and commissioning(FAT&SAT). A strong understanding of safety instrumented systems.

PROFESSIONAL ASSOCIATIONS

P. Eng, Association of Professional Engineers and Geoscientists of Alberta (APEGA), No. 82764

EDUCATION

Lead Engineer Training, Fluor University, Calgary, Canada

B. Eng., Mechanical Engineering, Tongji University, China

M. Eng., Mechanical Engineering, Tsinghua University, China

Ph. D., Mechanical Engineering, Tsinghua University, China

APPLICATION SKILLS

Field Instrumentation:

Control valves & PCV

On/Off Valves, ESD Valves, Safety Shut off Valves

PSV, PVRV

Flow Meters: Orifice plate, Vortex, Coriolis, Turbine, Electromagnetic, Ultrasonic, Wedge, Rotameter, Flow nozzle, V-Cone

Level Instruments: DP, Mag. Gauge, Radar, GWR, Level Gauges, Hydrostatic head, Ultrasonic

Temperature: TW, RTD, T/C, Tubeskin T/C, Temperature Transmitters and Gauges

Pressure Instruments: Transmitters and Gauges

Fire & Gas detectors, Flame Scanner, Fire Safety System

Analyzers: BS&W, GC, O2, pH, RVP, Color etc.

Specialty: BMS, Nuclear Instruments, CEMS, Strain Gauges, Corrosion Monitoring, DTS (Distributed Temperature System).

PLC/SCADA/DCS:

Allen-Bradley Controllogix, Triconex, Motorola MOSCAD, InTouch

Honeywell EPKS/Safety Manager, Emerson DeltaV DCS /SIS, ABB Advant OCS

Software:

InstruCalc, FLOWEL, Fisher Specification Manager, SizeMaster

SPI (INTools), FDO, Bentley PIW, SilCore, Windchill

Access, Excel, Word, PowerPoint, Visio

Industrial Experience:

Refinery, Petrochemical, Chemical, Thermal power plant, Waste water treatment

Conventional Oil &Gas: Wellhead and Oil battery, Compressor Stations, Gas Plants

Mining and Metals, Direct-fired Heater, Reactor

Oil Sands: SAGD & THAI, Froth Treatment, Upgrader

Coal Gasification

WORK EXPERIENCE

GTI (Gas Technology Institute), LA, CA, USA

Contractor - Instrumentation & Controls Engineer (Jan. 2018–Sept. 2020)

800 T/D R-GAS Gasification Technology Industrial Demonstration Plant, Taiyuan, China.

This project is using GTI’s patented R-Gas gasification process.

Reviewed plant operation manual.

Checked the Test Requests.

Prepared the onsite test data punchlist.

Verified the sequence control modules SAT using historian data

Participated Ignition Skid SAT.

Calibrated the coal flow meter / load cell weighing system.

Performed loop check and trouble shooting onsite.

Checked the wiring onsite.

Coordinated the instruments installation activities on site.

Witnessed FAT DeltaV DCS/SIS.

Reviewed Closed control loop description.

Generated the wiring diagrams.

Attended the Plant DCS/SIS kick-off meeting

Checked the cable schedule

Reviewed Honeywell prepared design documents for Gasifier ignition DCS/SIS system.

Reviewed the ignition skid vendor documents.

Purchasing instruments cabinets /Junction Boxes

Purchasing Solid(coal) Flow Meters

Determined SIL level requirements using LOPA

Participating HAZOP meetings for the Plant.

Participating PFDs and P&IDs review meetings

Translator from Chinese to English and vise versa.

Coordinated instrument related communications between GTI and EPC contractor-ECEC/Owner

Reviewed and Marked-up P&IDs

Generated instrument index

Checking instruments datasheets produced by Fluor/ECEC

Squad check mechanical equipment datasheets /drawings

Generated the Sequence control diagram

Generated the Cause and Effect Diagram

Generated interlock logic diagram using Visio.

Participated in HAZOP/LOPA meeting for ignition skid and the whole plant.

CADO Industries Inc., Calgary, Alberta

Contractor - Instrumentation & Controls Engineer (Sept. 2017–Oct.2017)

Projects I&C man-hour estimate

SCCC petroleum, CSS Pilot Project As-Built, Red Earth Creek, Alberta

Checking PLC panel and wiring against IFC drawings and marked up as AS-Built.

Fluor Canada Ltd., Calgary, Alberta

Contractor - Instrumentation Engineer (Nov.2014–Mar.2016)

Encana, Saturn 15-27 Phase 2 Sweet Gas Plant Project, part of the Cutbank Ridge program, British Columbia

Checking and marking up P&IDs, issuing FDCNs

Liaising with client to solve instrumentation related issues.

Coordinating between Process, Mechanical and piping to resolve the related instruments installation, maintenance problems.

Coordinating instruments dimensional drawings for piping to ensure piping get the drawings required.

Checking Level Sketches, instruments index, data sheets from Cebu Office

Checking and issuing all the RFQ/PO technical packages from Cebu office

Squadchecking mechanical vendor drawings

Preparing RFQ package for truck loading/unloading local control panels.

NWRP, NorthWest Redwater Refinery- LC Finer Unit, Alberta

Checked and marked up over 400 sheets IFC P&IDs for Re-IFC.

Coordinated over 1200 transmitters (Pressure, DP Level, DP Flow, temperature) and 43 HT pressure gauges’ materials requisitions activities between Fluor Calgary office and New Delhi office

Resolved the response time problem for DP level transmitters with seal.

Resolved heat trace problems for remote mount transmitters with seal.

Checked and issued all the PO technical packages for about 1200 transmitters and 43 pressure gauges.

Checked Cause and Effect diagram (Shut Down Key).

Reviewing MLG vendor dimensional drawing.

OnQuest Canada ULC (formerly Born Canada ULC), Calgary, Alberta

Instrumentation Project Engineer (Jan 2014- Oct.2014)

Thai Oil, Linear Alkyl Benzene Project, Thailand

This project included 2 direct-fired heaters: Charge Heater and Hot oil heater

Determined the scope of project, cost estimate, man-hour estimate and schedule.

Reviewed and Marked-up P&IDs

Generated instrument index and datasheets

Communicating with client to resolve the instrument related issues.

MR for all instruments including safety shut off valves, damper actuator, tubeskin thermocouple and flame scanner

Developed Wiring block diagram for BMS.

Developed instruments installation details.

Reviewed instruments vendor drawings and documents.

Inspected delivered instruments.

Chevron, Offshore WHRU Replacement, Thailand

Communicating with client to resolve the instrument related issues.

MR for all instruments including damper actuator and tubeskin thermocouple.

Resolving the thermowell vibration problem.

BMS Control System PLC Upgrade Project, Africa

Count I/O points.

Safety PLCs (Modicon and Triconex) Hardware configuration and cost estimate.

Acero Engineering Inc., Calgary, Alberta

Senior I&C Engineer (July 2013- Oct.2013)

Working on Capital Sustaining Projects for PennWest, Pengrowth, Oilserv, Baytex, etc.

Duties include all aspects for instrumentation including control narrative and shutdown key; focus on solving the instruments problem such as water injection pump recirculation valve, fast delivery flow meter, BS&W etc.

Jacobs Canada Inc., Calgary, Alberta

Senior I&C Engineer (Oct.2012 – June 2013)

NOVA Chemicals — Capital Sustaining Projects, Alberta

Generating instrument datasheets

Preparing instruments RFQ and RFP packages

Evaluating instruments technical bids

Instruments selection and sizing for Flow Meter, Control Valve and PSV etc.

Reviewing vendor drawings and documents

Reviewing CWP (construction work package) including instrument Location Plan, Loop drawings, instruments installation details and cable schedule.

Bantrel Co., Calgary, Alberta

Contractor - Instrumentation Engineer (Mar. 2012-Oct.2012)

Suncor, DCU, Voyageur Upgrader, Alberta

Purchased ultrasonic flow meter for pump discharge

Purchased nuclear level instruments for coker feed drum and coke drums

Purchased vibration monitoring systems from Bently Nevada

Purchased stress monitoring system for coke drum.

Fluor Canada Ltd., Calgary, Alberta

Contractor - Instrumentation Engineer (Feb.2011–Mar. 2012)

NWRP, NorthWest Redwater Refinery-Hydrotreater unit, Alberta

Generated Instrument Index and datasheets.

Generated RFI package for critical instruments such as ANSI 2500# Control Valves and Vortex flow meters

Developed P&IDs from UOP P&IDs

Squadchecked mechanical package

Coordinated instruments activities between Calgary and New Dehli office.

Tagged instruments

Developed P&ID typicals such as combustion air measurement and control.

Vale Inco, Long Harbour Processing Plant (produce 50,000 t/y of nickel with Co & Cu)

Purchasing 152 PSVs including sizing, Datasheets and RFP package.

Purchasing PCV (pressure regulators).

Did technical bid evaluations for 783 pressure and temperature gauges from 7 vendors.

Checked and signed off about 1000 isometrics.

Acero Engineering Inc., Calgary, Alberta

Contractor - Instrumentation Engineer (Sept. 2010 – Feb.2011)

Orion Oil &Gas, Beaverhill lake Gas Plant Unit 1 #2 Compressor Installation and VRU Addition

SNC-Lavalin Inc., Calgary, Alberta

Senior Instrument Engineer (Oct.2008 – Jul 2010)

Saudi Aramco, Wasit Gas Plant FEED, Saudi Arabia, U&O Unit, Lead instrument Engineer

Petro-Canada Oil Sands Inc. — Fort hills Froth treatment Project, Alberta.

Jacobs Canada Inc., Calgary, Alberta

I&C Specialist (May 2006 – Sept. 2008)

B.A. Energy — Heartland Upgrader Project. This is a new process for the oilsands upgrading.

ProjEx Technologies Ltd., Calgary, Alberta

I&C Specialist (July 2005 – April. 2006)

ACM Facility safety, Calgary, Alberta

Specialist (Work Experience Placement, May – June 2005)

Sabre Instrument Services Ltd., Calgary, Alberta

Wireman (January – February 2004)

LANGUAGES

English, Chinese (Mandarin), German

Contact this candidate