Sec School Aramco
Resume:
PRAKASH L
Flat no -****,*rd Cross, Ananthnagar Phase 2, Electronic City Phase 2, Bangalore – 560 100,Karnataka, INDIA adl3zg@r.postjobfree.com, +91-978*******
Profile
Multi-faceted, seasoned and efficient Control and Instrumentation Engineer with over 7+ Years of experience with Industrial Process control and automation in Oil and Gas, Power and Steel industries design, erection, commissioning, operation and maintenance.
A middle management professional, with significant project management and quality expertise gained through working with various Oil and Gas, Industrial and Energy Projects.
Diversified skill sets covering administrative support, client relations, verbal and written communication and project management.
Technical Proficiencies
Distributed Control System (DCS) Yokogawa Centum VP
Rockwell PLC Control Logix, Compact Logix, SLC and Micrologix.
SCADA & HMI Factory Talk View SE, Panel View & Panel View Plus, Panel View Component.
Drives Power flex VFD Series (Rockwell), ACS 550 (ABB) .
Industrial Communication EtherNet/IP, Control Net, DeviceNet, HART, DH485,ASCII DH+,RS232,Modbus RTU, Modbus TCP/IP, Foundation Fieldbus
Field Instruments Yokogawa, Rosemount, Honeywell - Pressure, Flow, Level and Temperature Transmitters
DCS, PLC, MMI Software Used DCS :- System View Ver 6.07,6.06, 6.04, 5.04, yGET,Engineering Tools, FF Builder, AD Suite.
Rockwell software: RsLogix 500, RsLogix 5000,Studio 5000, Panel Builder, CCW, RsView 32, FT View SE, FT View ME.
Schieder : Knowledge on Citech Graphic Builder 7.30. Siemens : SIMATIC Manager (BASIC Knowledge) .
Asset Management System PRM (Plant Resource Management). Education
Bachelor of Engineering in Instrumentation and Control Engineering July 2009 - April 2012 First Class with Distinction, 8.02 CGPA, Saranathan College of Engineering –Trichy, Anna University, TN, India
Diploma in Instrumentation and Control Engineering August 2005 - April 2008 First Class with Distinction, 93.2% Sheshasayee Institute of Technology -Trichy, TN, India
SSLC June 2004 - April 2005 First Class with Distinction, 89% Bishop Heber Hr.Sec School, Trichy, TN, India
Page 2 of 6
Work Experience
Yokogawa India Limited, Bangalore, India
Executive Engineer July 2017- Present
Detailed engineering design for DCS project (Yokogawa Centum VP) based on P&ID, including simple and complex process control loop, and sequential control logics, Tuning of PID Controllers for Stabilizing and optimizing the process, creation of graphics, creation of Trends, alarm management, report generation, annunciator panel setting.
DCS with Subsystem communication like ESD, PLC, SLPC, Recorders, RTU, SCADA and other different vendors instruments
Design and calculation design parameters for industrial communication (Fieldbus) like HART, Foundation Fieldbus, Modbus RTU, Modbus TCP/IP and Profibus compatible field instruments
Selection of appropriate field instruments like different transmitters, control valves, valve positioned, etc.,
Involved in Factory Acceptance Test (FAT) activities
Involved in Site Acceptance Test (SAT) Activities.
Design documents preparation involves I/O list, Modbus network drawing, controller hardware settings, FF segment drawing, system configuration drawing etc.
Involved in online logic modification in various plants.
Invlolved in Commissioning Activities.
Key Projects Involved
Client: LNG Canada-, CANADA (Shell /Petronas/PetroChina/Mitsubishi/KOGAS) Role: DCS System Engineer (DCS)
Software Used : Yokogawa Centum VP
Responsibilities:
Reviewing Customer inputs, Preparation of FDS document.
Technical Discussion with Affiliates.
System Loading estimation from IO ‘s, Typical identification from P&ID.
Generation of Complex Loops (Duty Stand-by Pump Logic/MOV/)
Generation of Sequence Logics (Dehydration Sequence – Dryer Sequence, Pressure Letdown Tie out Sequence, Anti Foam Injection Sequence.
Sequence was done in SEBOL (SFC Coding) Programming.
Done Remote FAT (Factory Acceptance Test) with the Client Shell /JGC.
Punch Closure.
Sequence Graphics, Trend configuration and Modification. Client: Khurais Project PH-3 Expansion Project-, SAUDI ARAMCO Role: DCS System Engineer (DCS)
Software Used : Yokogawa Centum VP
Responsibilities:
Reviewing Customer inputs, Preparation of FDS document.
Technical Discussion with Affiliates.
System Loading estimation from IO‘s,Typical identification from P&ID.
Generaton of Complex Loops (Boiler Control, Turbine Bypass Control)
Generation of Sequence Logics (RO System, Pump,MOV, Valve Logics) and Graphics & Debugging of Logics.
Page 3 of 6
Modbus Mapping for STG,ESD system,Vibration Monitoring System .
Done FAT (Factory Acceptance Test) with the Client in Saudi Yokogawa.
Punch Closure.
Graphics, Trend configuration and Modification.
Client: Fhadhili Gas Plant, SAUDI ARAMCO
Role: System Engineer & Commissioning Engineer (DCS) Software Used : Yokogawa Centum VP
Responsibilities:
Commissioning of Fieldbus Devices
Generation of Logics for Nitrogen Package, Complex loops
Commissioning of Nitrogen Package Logics & Pump Logics.
Punch Closure Activity.
Debugging of Logics with Graphics.
Assigning Trend configuration.
Client: RAMT, Yanbu – SAUDI ARAMCO
Role: Commissioning Engineer (DCS)
Software Used : Yokogawa Centum VP
Responsibilities:
Subsystem mapping(Modbus TCP/IP) for Ship Loading System
Developing logics as per requirment.
Integration of DCS with Ship Loading System Siemens PLC.
Debugging of Logics with Graphics.
Trouble shooting
Assigning Trend configuration.
Client: Khurais Project PH-2 Expansion Project-, SAUDI ARAMCO Role: Commissioning Engineer (DCS)
Software Used : Yokogawa Centum VP
Responsibilities:
Site Panel Power on Support.
Commissioning & Configuration of FF Field Instruments
Responsible for installation and commissioning of Asset Management System- PRM (Plant Resource Manager).
Field instrument configuration (Fisher Control, Vega, Magnetrol) in PRM
DCS Logic Modification in HP &LP Compressor Area.
Inter FCS communication using CI/CO Function blocks.
Debugging SFC sequence using SEBOL programming.
Subsystem Configuration & debugging.
Report Configuration.
Page 4 of 6
Client: ZADCO Offshore Project – ADNOC (Abu Dhabi) Role: System Engineer (DCS)
Software Used : Yokogawa Centum VP
Responsibilities:
Conducting FAT with Customer.
Logics development for HP Pump, NF Pump and Treated Water Booster Pump sequence using Logic Chart.
Logic Modification as per the Requirement of the Customer.
Configuring Real time and Historical Trends.
Responsible for installation and commissioning of Asset Management System- PRM (Plant Resource Manager).
Previous Employer: M/s. Base Automation Technologies, Chennai – 96.
Previous Designation: Sr. Project Engineer (4+ years of experience) Duration: Jan 2013 to Jun 2017.
Client: M/s GEA BGR, Chennai
Role: Senior Project Engineer
Hardware & Allen Bradley make Compact Logix 1769- L30ER (Soft redundancy) Software Used : RS Logix 5000 Design station, Rslinx,FT View ME Responsibilities:
Understanding customer requirements.
Preparation of IO list, Communication IO list, FDS .
Logic development and Graphic development.
Involved in Factory Acceptance Test.
Communicating with Yokogawa DCS through Modbus TCP/IP
Punch closure and Documentation.
Client: M/s Ashirvad Pipes, Attibelle
Role: Senior Project Engineer& Commissioning Engineer Hardware& Allen Bradley make Compact Logix 1769- L33ER (Soft redundancy) Software Used : RS Logix 5000, Rslinx, FT View ME, FT View SE . Responsibilities:
Understanding customer requirements.
Preparation of IO list, FDS, Cause & Effect, Startup & Shutdown Procedure Document.
Logic development, HMI, SCADA development.
Trend Configuration & Report Configuration.
Communicating with Festo Valve Bank through Ethernet/IP.
Communication with N2, Compressor, Fire & Safety System through Modbus TCP/IP.
Commissioning and Handover.
Page 5 of 6
Client: M/s DCW, Thiruchendur
Role: Project Engineer-Software Development & Commissioning Software Used : MicroLogix 1400 with Modbus Converter (80 Energy Meters), Kepserver 5.0. Responsibilities:
Modbus Mapping List Preparation.
Communicating energy meters with ML1400 through Modbus RTU.
Report configuration.
Communication with Yokogawa DCS through Modbus TCP/IP via Compact logix. Client: M/s Sterlite Industires Ltd, Tuticorin
Role: Project Engineer-Software Development & Commissioning. Software Used : Control Logix 1756-L72 with Hot Redundancy Responsibilities:
Preparation of IO list, Reviewing Customer documents.
Generation of logic & SCADA development.
Report & Trend Configuration
Communication with Flow meter with Modbus RTU.
Commissioning activity and Handover.
Client: M/s Bilfinger Ltd,UK
Role: Project Engineer
Software Used : FT View SE, Rslogix 5000, RSView 32. Responsibilities:
Upgradation from RSVeiw 32 to Factory Talk View Studio SE.
Replacing Global object with Rockwell PlantPAx.
GFX Updation.
Graphic Tested and Documentation.
And many more projects executed in the Process Automation division. Personal Details
Date of birth : 14 November, 1990 Age : 30 Yrs. Gender : Male Passport No. : K1669730 Nationality : Indian Father’s name : Mr. Loganathan. Marital status : Married Religion : Hindu Language : English, Tamil, Hindi. Place : Bangalore, INDIA
Date : [ PRAKASH L]
Contact this candidate