Profile

Dmitry Shlyubsky has ** years of experience as a Mechanical Engineer. His background includes extensive experience in providing design/consulting engineering services for projects in the Offshore Oil & Gas, Power Generation, Petrochemical, and Mid-Stream Pipeline industries. Abilities include: Stress analysis, FEA, and ASME Code calculations for piping and pressure vessel design; Hydraulic Analysis; Fire Protection System Design; Preparation of specifications for process equipment; and Support of HAZOP/PHA analysis.

Qualifications

2002 – 2006

1995 – 1999

Professional Development

Software

Standards

Employment

Jul 20 - Present

Sep-18 – April-20

June-17 – May-18

MS Mechanical Engineering

Georgia Institute of Technology

BS Mechanical Engineering

Georgia Institute of Technology

Licensed Professional Engineer, Mechanical Engineering; LA License No. 0034746

Caesar II 2019 Ed., PVelite 2020 Ed., COMPRESS 2017 Ed., NozzlePro V. 8.6, FEPipe Ver.6.6,

PIPE-FLO Professional 2009, SolidWorks Premium 2015 Ed.& SAFI Ver. 8.0

ASME BPVC Sections I & VIII and ASME B31.3, B31.1, B31.8 piping codes, API 520, API 521, API 650, API 620 & API 1102, NFPA Codes

Engineers & Constructors International, Inc. (ECI)

Senior Mechanical Engineer

Duties & Achievements include:

JPO / Mitsui Chemicals Inc., NEL (POE) FEED Works Project: Professional Engineer of Record for the Mechanical Engineering scope of the FEED phase of a CAPEX Project to construct an Alpha-Olefin Copolymer Elastomer Plant in Saint James Parish, LA.

SK Primacor Americas, Freeport TX, EAA1 Improvements Project: Development of User Design Specifications, Technical Bid Analysis and review of vendor submittal documents for Heat Exchangers (Hyper Compressor 3rd Stage coolers) Designed per ASME BPVC Section VIII, Div. 2.

Audubon Engineering

Mechanical Engineer IV - Pressure Equipment Integrity Technical Assurance Engineer

Shell Oil Refinery in Norco Louisiana

Duties & Achievements include:

Technical Assurance of Pressure Equipment Integrity for 30 Small CAPEX Projects

($1MM - $22 MM)

Selection of Materials, Development of Piping Material Class Specifications.

Development of Specifications for Pressure Equipment.

Review/ Approval of Piping Isometrics and Piping Stress Analysis Calculations.

Review/ Approval of Engineering Calculations, Design Drawings and NDE/Testing procedures for technical adequacy, compliance to industry standards and compliance to company specifications for Pressure Vessels & Heat Exchangers.

Ohmstede Ltd.

Mechanical Engineer

Duties & Achievements include:

Perform Design Calculations and Detailed Design for the fabrication of Shell & Tube Heat Exchangers per the requirements of ASME BPVC Section VIII Div. 1 and TEMA.

Perform Design Calculations and Detailed Design for the fabrication of pressure vessels per the requirements of ASME BPVC Section VIII Div. 1.

Sep- 15 – June 17

Apr-13 – July-15

National Oilwell Varco Completions & Production Solutions

Senior Mechanical Engineer

Duties & Achievements include:

Lead Mechanical Integrity Specialist for Joint Industrial Projects - Performed FEA Stress Analysis to Ensure the Mechanical Integrity of Pressure Retaining Casings for Subsea Rotating Equipment being developed as part of a Joint R&D program between NOV and Fuglesangs Subsea, using SolidWorks Simulation.

Engineer of Record in Responsible Charge for Ensuring Design Quality and Code Compliance of Pressure Vessels Designed per the requirements of ASME BPVC Section VIII Div.2.

Lead Engineer in Responsible Charge of Ensuring Design Quality and Code Compliance of Pressure Vessels Designed per the requirements of ASME BPVC Section VIII Div.1.

Petro-Braz FPSO Project: Selected metallurgy, Defined equipment pressure ratings, & provided technical expertise for the development of specifications and P&ID drawings for the Gas Dehydration & Gas CO2 removal skids for the FEED development phase of the project.

SEPCO Appomattox TLP Projects: Performed ASME Section VIII, Div. 1 pressure vessel design calculations for the Diesel Filter Vessels using COMPRESS. Engineer of Record in responsible charge for quality assurance of lifting plan documentation and lifting plan structural calculations.

Performed FEA Stress Analysis for Support Assemblies, High Pressure Testing Chambers, & Thin walled, large diameter structures using SolidWorks Simulation.

Keystone Engineering Inc.

Senior Mechanical Engineer

Duties & Achievements include:

Lead Mechanical Engineer, SEPCO Enchilada Platform, DRA Injection Skid Project: Coordinated the development of P&ID drawings, Scopes of Work, Engineering Work Packs and other Deliverables. Reviewed Equipment Vendor Submittals for Approval.

Lead Mechanical Engineer, SEPCO Brutus TLP, Instrument Air Compressor Replacement Project: Coordinated the development of Equipment Specifications, P&ID drawings, Scopes of Work, Engineering Work Packs and other DCAF Deliverables. Coordinated the Review of Equipment Vendor Submittals for Approval.

Lead Mechanical Engineer, SEPCO West Delta 143, FEED Engineering for Flare Ignition System Replacement Project: Coordinated the development of Equipment Specifications, P&ID drawings, Scopes of Work, Engineering Work Packs, and other Deliverables. Coordinated the Review of Equipment Vendor Submittals.

Lead Mechanical Engineer, SEPCO Brutus TLP, Glider Subsea Tieback to Wells 7 & 8

Project: Coordinated the development of drawings, Scopes of Work, Engineering Work

Packs and other DCAF Deliverables. Coordinated the review of Equipment Vendor Submittals for approval. Provided commissioning and start-up support.

Enterprise Products Co. Neptune Gas Plant in Saint Mary Parish, LA: Performed Stress Analysis to identify the root cause of failure for the damaged pressure relief piping in the Train No. 1 pressure relief system.

Enterprise Products Co. Keatchie Plant in Keatchie, LA: Performed Stress Analysis to identify the root cause of failure for the piping in the Level Control Blow –Down System of the Rich Amine Contactor. Developed design modifications to prevent future failures.

SEPCO Deep Troika Expansion Project: Developed Piping Stress Analysis Strategy and Performed Relief Vent Sizing Calculations for Chemical Storage Tanks.

Nov-11 – April-13

Waldemar S. Nelson & Co. Inc.

Mechanical Engineer III:

Duties & Achievements include:

Bulk Resources LLC, Port of New Orleans Crude Oil Project: Performed hydraulic analysis for the fire water system, developed specifications and ensured proper procurement of all fire protection equipment including the 3000 GPM Fire Water Booster Pump Skid, Fire Monitors, Hydrants, Hose Reels and Foam Concentrate.

Exxon Mobil Production Company, Test Separator Acid Neutralization Project: Performed hydraulic calculations and evaluated bid proposals for pumping equipment to ensure that the Acid Neutralization Loop on the Well Clean-up Test Separator meets client specifications.

Sequoia Global Inc.- OMEGA/BANGO Oil, Fallon Motor Oil Recycling Facility: Performed Stress Analysis to determine the stresses due to thermal expansion of piping systems operating at 500 F to 650 F, using Caesar II Ver. 5.2. Provided recommendations to relieve excessive loads and stresses.

Mobil Equatorial Guinea Inc, JADE Platform Water Handling Unit: Evaluated the dynamic fatigue stresses in a 24" production header subject to high levels of vibration due to cavitation and slug flow, using Caesar II Ver. 5.2. Provided recommendations for design changes that minimized the dynamic stresses and vibrations.

Sewerage & Water Board of New Orleans, Contract 1352 Diesel Tank Replacement: Performed field engineering surveys and coordinated the development of Demolition drawings, P&IDs, General Arrangement drawings and specifications to replace the existing Diesel Fuel Storage Tank.

Sewerage & Water Board of New Orleans, Emergency Repairs to the Panola Pump Station: Performed field engineering surveys, specified components and coordinated the development of mechanical design drawings for the relocation of the Electrical Synchronizer.

Jan-11 – Oct-11

Factory Sales & Engineering

Senior Staff Mechanical Engineer:

Duties & Achievements include:

Developed design calculations for pressure retaining components in high-pressure steam generation systems, per the requirements of the ASME Boiler & Pressure Vessel Code Section I.

Provided leadership and guidance to design and drafting personnel in the development of design drawings for pressure retaining components, ducting systems, Motor/Instrument location drawings and P&IDs.

Oct-09 – Dec-10

Project Consulting Services

Project Engineer:

Duties & Achievements include:

Ensured the development of accurate specifications for anchor blocks installed at pipeline pig trap stations to limit the movement of 48" underground natural gas pipelines by performing expansion & flexibility analysis using Caesar II Ver. 5.2.

Performed quality control of flow simulations, piping stress analysis calculations and equipment & vehicle crossing stress calculations for underground natural gas pipelines.

Ensured that the stresses developed in piping, during offshore pipe laying operations, are in conformance to government standards by using OFFPIPE to perform stress analysis and determine the correct arrangement of roller supports on pipe laying vessels.

Feb-06 – Aug-09

URS Corporation of America

Mechanical Engineer II:

Duties & Achievements include:

Developed procurement specifications and evaluated bids for boilers, boiler feed water pumps, fin fan air coolers and large diameter piping to support Phase Ill engineering for multi-million-dollar projects at oil refineries owned by Valero Oil Co. and Amerada Hess Corp.

Ensured the structural integrity of large diameter piping systems for several multi-million-dollar projects. Performed piping stress analysis; Zick's analysis for saddle supports; and Finite Element Analysis (FEA) on mitred elbows, large diameter piping branches and closely spaced arrays of piping branches. These calculations were performed using Caesar II and FEPipe Ver. 4.2 & 5.0.

Provided technical expertise to ensure the correct design of pressure vessels, and proper reinforcement of nozzle openings (& clip attachments) by performing ASME Section VIII Div. 1 code calculations, WRC 107 calculations and FEA analysis per the requirements of the ASME Section VIII Div. 2 and API 650 codes. These calculations were performed using PVelite and FEPipe Ver. 4.2 & 5.0.

Ensured the reliability of the Flue-Gas Desulfurization System at the Southern Company Hammond Power Plant by developing installation specifications for piping insulation, duct insulation and borosilicate glass acid resistant duct lining.

Developed procurement specifications and bid evaluations for sump agitators and truck weigh scales.

Aug-02 – Jan-06

Georgia Institute of Technology

Graduate Research Assistant:

Duties & Achievements include:

Published a Master's thesis to document experimental research on the application of high-power pulsating actuators to implement active flow control to enhance the exhaust gas recirculation by increasing the rate of mixing in combustion chambers.

Designed, constructed, operated and maintained experimental facilities. Performed automated data acquisition, and measured flow parameters using Photo Imaging Velocimetry and pressure sensors. Reported findings in thesis.

Jan-00 – Aug-02

National Filtration Systems / Clark Reliance Corporation

Production / Applications Engineer:

Duties & Achievements include:

Prepared designs and cost estimates for fluid handling skids.

Developed P&IDs and selected instrumentation and process equipment to prepare cost estimates for bid-proposal packages.

Developed specifications, sized equipment, performed calculations, prepared designs and developed cost estimates for proposed capital projects to upgrade the National Filtration Systems manufacturing facility.

Performed production support, troubleshooting and maintenance engineering.

Contact this candidate