Piping Designer

Name :MARTE V. BALBABOCO

Home Address :****B Gladiola Extension, Saranay Homes, Bagumbong

North Caloocan City.

Contact Nos. : +639********* / +639*********

E-mail address : *******************@*****.***

FB Account : https://www.facebook.com/marte.balbaboco1 POSISTION APPLIED FOR: AUTOCAD DRAFTSMAN

SUMMARY EXPERIENCE:

Over Nine (9) years in performing engineering detailed design and constructions on various facilities relating to Petrochemical Plant, Oil & Gas for onshore and Refining Industries. Perform computer layouts using specifications, standard drawings, design instruction, plot plan, flow diagram, line list and supplier information. Communicate and interfaces with other project design and engineering disciplines in developing detailed design drawings & prepare complete piping drawing pipe plan & isometrics using Navisworks, CadWorx, Microstation & different version of AutoCAD 3D Pipe Modeling software and using Code of Standard practice of American Institute of Construction, (ASTM) American Society of Testing Materials, (ASME) –American Standard of Mechanical Engineering, (JIS) –Japan International Standard. PROJECT EXPERIENCE:

Refineries, Oil and Gas Industries and Petro Chemical Plant. SUMMARY OF QUALIFICATIONS:

LOCAL

As a Piping Designer II

• Working in Chiyoda Philippines(CPH) as a Piping Designer II using 3D viewer in Navisworks.

• Project accomplishment & implementation at Free Port liquefied natural gas (LNG) in Houston Texas U.S.A.

• Proficient with AutoCAD, Plant Design System (PDS) software.

• Prepared designs and drawings using project specifications.

• Assigned the tasks of preparing piping drawings, layouts, isometric, P&ID and 3D graphic presentation.

• Responsible for providing guidance to Auto Plant operators and solves technical issues.

• Responsible for stress sketches Bill of Materials extraction of piping drawings and compliance with industry/client/company standards.

• Responsible for checking isometric drawings done by designer I.

• In-depth knowledge of Microsoft Word, Excel and the Internet. ABROAD

As a Mechanical/Piping Designer

• Working in DAR Consulting Engineers as a Mechanical/Piping Designer using 2D and 3D in CADworx, Microstation, AutoCAD all versions and CAD overlay.

• Project accomplishments in Sabic affiliates, such as Saudi Kayan, IBN Zahr, Sadaf, IBN Sina in Jubail Industrial City and Yanpet National Industrial Gases Company, Yansab National Petrochemical Company and IBN Rushd in Yanbu Industrial City.

• Highly skilled in preparing material specifications, P & ID and Tie-in index.

• Assigned the tasks of preparing piping drawings, layouts, isometric, P&ID and 3D graphic presentation.

• Responsible for providing guidance to Auto Plant operators and solves technical issues.

As a Piping Draftsman

• Two years of working experience in spooling of isometric drawing using turbo talgen system/AutoCAD release 2006.

• Marked up isometric drawing, revision and as built (Process and Utility line) under engineering department as a Piping Draftsman in Pearl GTL (Gas to Liquid) Shell Project, Ras Laffan Industrial City, Qatar.

As an AutoCAD Operator

• Three years of working experience in quality control for fabrication under mechanical installation department as an AutoCAD Operator using 2D and 3D construction models in piping and structural process in Medinah and Buraidah, K.S.A.

• Modify drawings and simplify details in piping and structural process.

As a Line Checker

• Experienced in punchlist line checking or tracking at ARAMCO Project under ABV ROCK GROUP management.

• Experienced in pipeline tracking on product lines such as diesel, gasoline, jet fuel and in utility line such as firewater and potable water, sewage and irrigation system.

SCOPE AND RESPONSIBILITIES:

LOCAL

As a Piping Designer II

• Checking Data Block (Criticality Rating, Line Condition, Test Condition, PWHT, NDE, Insulation, Paint).

• Checking Continuous Line No, Sheet No, Tie-in Symbol & Northmark.

• Consistency check with connection to existing facilities.

• Location of break point (Line Break, Area Break, Battery Limit).

• Latest P&ID will be attached to the deliverable ISO drawings, P&ID revision after formal P&ID issue (Check master P&ID) & P&ID requirements and notes (Slope Requirement, No Pocket, Free Draining, Min./Max. Length, Symmetric, Top Entry, & In View).

• Line designation (Size, Symbol, Number, Service Class, Insulation, Paint Trace, Service class break & insulation break

(Type or Thickness)

• Consistency check of line connection/Branch Sequence & Flow direction.

• Valve type, high pressure side (Cavity End) direction of Cryogenic Valve Strainer type, sealing direction of valve Removable stool & other components.

• Checking of size and rating of equipment/Instrument Companion Flange, straight run for Flow Meter, Temperature Instrument, Control Valve & Rotating Equipment.

• Checking for Instrument Tag No as per P&ID.

• Consistency check of nozzle length and size of temperature instrument, Pitot Tube flow meter & detail of Analyzer take-off point.

• Material selection for PG, PT, PDG, LG, LT, FT, etc. as per STD. DWG.

• Checking of orifice tap orientation & pressure connection

• Dimension of equipment model (Verify using vendor drawing), equipment nozzle size and rating, connect to correct equipment nozzle, mating Flange supplied by equipment vendor & location of equipment as per plot plan.

• Checking for no visible "Hard to Hard" & "Soft Clash" clash with Navisworks.

• Checking of clearance from Cable Tray & Access Route, atmospheric relief valve & manhole vent.

• Checking of no obstruction for manhole or hand hole, instrument/Electrical Equipment, Fire/Safety equipment, maintenance fixture equipment, equipment maintenance space, Bolt removal space, underground (Open Ditch, Sewer Pit, Etc.) & for visible materials (Level Gauge, Sight Glass, Etc.).

• Requirements of high pocket vent, low pocket drain, vent/drain, valve on bleeder, Sleeve & Break Flange.

• Check for efficient pipe routing including minimum use of fittings and welds.

• Operation access to control valve, PRV, PSV or other instrument & Grouping of valve to accessible location.

• Minimum required clearance between two welds.

• Flex calculation has been completed based on latest information, support condition between latest ISO DWG, and Flex ISO DWG & Support Span.

• Consistency check between actual model dimension and support tag no.

• Checking of vendor supply material not indicated in material list.

• Checking of line condition at bottom of ISO DWG, are fulfilled. SCOPE AND RESPONSIBILITIES:

ABROAD

As a Mechanical/Piping Designer

• Checking of detailed design drawings for construction -scope of work, identify the mistakes and deviations.

(Disciplines-Piping, Mechanical, Pipe line, Structural).

• Revise the drawings or update the drawings as per site changes.

• Preparation of required procedures & method statements by the engineer guide lines.

• Co-ordination to the project control department in quantity estimation in site.

• Preparation of plant & well, manifold area plot plans.

• Coordinate with the consultant of technical problems of insufficient information.

• Preparation of plant layouts, piping plans, piping general arrangements, equipment layout & equipment general arrangement

• Preparation of P&ID, isometric drawings & tie in schedules.

• Estimate and evaluate accomplishment of the

sub-contractor/vendor.

• Preparation mto’s for Cs, Ltcs, Ss, Grv, Hdpe linear. SCOPE AND RESPONSIBILITIES:

As a Piping Draftsman

• Prepare spooling of isometric drawing using turbo talgen system/AutoCAD release 2006.

• Prepare isometric drawing, checking of match line from orthographic drawing to isometric drawing.

• Prepare material take off for structural and piping works.

• Prepare marked up isometric, revision and as built.

• Expedite actual location of pipe route to be revised, prepare the sketched drawing, revision as well as as-built.

• Examine customer’s design drawing, specification and instruction covering both structural and piping works.

• Coordinate with the consultant of technical problems of insufficient information.

• Send site query to the designer if there are some discrepancies found in the design drawings.

• Show dimension bill of quantities to be used and other information of the drawing.

• Estimate and evaluate accomplishment of the

sub-contractor/vendor.

• Preparation of the isometric drawing, weld marking and also marked up iso. For steam tracing line and other routine engineering calculation works.

SCOPE AND RESPONSIBILITIES:

As an AutoCAD Operator

• Provides computer aided design services and support to design and engineering teams involved in commercial and educational construction projects.

• Develops updates and manipulates 3D construction models for projects in preconstruction or construction.

• Develops conceptual models of proposed projects to support business development efforts.

• Provides CAD-related technical and analytical support to project teams.

• Develops and maintain material and documents regarding Company’s CAD best practices, CAD resources and

CAD/modeling file inventories.

• Performs other related duties as required and designed. SCOPE AND RESPONSIBILITIES:

As a Line Checker

• Prepares P& ID drawings, Isometric drawing, and structural layouts/details on Intergraph.

• Checks and tracks punchlist lines and responsible for job package to be closed.

• Line checks or tracks of different types of product lines such as diesel, gasoline, jet fuel and all utility lines. WORK EXPERIENCES:

LOCAL

• Job Title: PIPING DESIGNER II

Employment Date: August 1, 2015 up to June 30, 2016 October 22, 2016 up to November 30, 2016

Country: SUN PLAZA BUILDING

1507 Shaw Boulevard cor. Princeton Street

Barangay Wack-Wack, Mandaluyong City

1555, Philippines.

Employer: (CPH) Chiyoda Philippines Corporation.

Projects: Free Port liquefied natural gas (LNG) in Houston: Texas U.S.A.

ABROAD

• Job Title: MECHANICAL/PIPING DESIGNER

Employment Date: June 17, 2011 up to July 22, 2014 Country: Jubail and Yanbu Industrial City, Kingdom of Saudi Arabia

Employer: DAR Consulting Engineers

Projects: Saudi Kayan Crude Oil Spillage

Taseeb New NDB Feeder at Ibn-Zahr

Sadaf Ethyline Furnace Feep Preparation

Saudi Kayan Storage Area New Flare header

Instl.

IBN Rushd Replacement of Potable Water

Yanpet Additional Cooling Water and Nalco

Chemical Dosing.

• Job Title: PIPING DRAFTSMAN

Employment Date: September 11, 2007 to December 03, 2009

Country: Ras Laffan Industrial City, Qatar

Employer: Consolidated Contractor International

Company

Project: Pearl (GTL ) Gas to Liquid Shell Project

Client: Shell/Qatar Gas

Consultant: KBR (Kellogg Brown & Root) and JGC (Japan Gas Corporation)

• Job Title AUTOCAD OPERATOR/LINE CHECKER

Employment Date: March 14, 2004 to February 13, 2007 Country: Buraidah, Al Qassim, Kingdom of Saudi

Arabia

Employer: ABV ROCK GROUP KB, Site 03

Project: Storage Plant

Client: ABV ROCK GROUP

Consultant: SSSP (Saudi Strategic Storage Plant)

TRAININGS AND SEMINARS ATTENDED

• Shell/Qatar Petroleum- Safety Training and Seminar (Train the trainer). Conducted at the Pearl Village Training Centre Ras Laffan, Qatar.

• Autodesk AutoCAD 2D & 3D at Informatics, SM Fairview, Quezon City.

• Idoc's at (CPH) Chiyoda Philippines Corporation. EDUCATIONAL ATTAINMENT

College

School : NOVA COMPUTER COLLEGE

Year Graduated : April 13, 1999

Degree Earned : Computer Engineering Technology

Secondary

School : PANGARAP HIGH SCHOOL

Year Graduated : April 1, 1989

Degree Earned : Diploma (Secondary Level)

Primary

School : PANGARAP ELEMENTARY SCHOOL

Year Graduated : March 28, 1985

Degree Earned : Diploma (Primary Level)

Language Skills: English & Tagalog

PERSONAL DATA

Birth Date : September 16, 1972

Citizenship : Filipino

Sex : Male

Civil Status : Married

Age : 47

Religion : Catholic

Weight : 178 lbs

Height : 5’7”

Driver’s License : N02-10-000638

SSS No. : 33-1480849-0

Passport No. : P5557235A

Date Issued : January 09, 2018

Expiration Date : January 08, 2028

I hereby certify that all the information stated here are true and correct to the best of my knowledge and belief.

MARTE V. BALBABOCO

Applicant

Contact this candidate