Power Plant Engineer
Resume:
Navneet Singh Chauhan
Mobile: +91-800*******, +91-870*******
E-Mail: *******.********@*****.***, *******.***@*****.*** Career Objective:
Looking for a challenging job that will allow me to use my knowledge gained from diverse experience to achieve excellence in my profession and with excellent team work to contribute positively for growth of any organization I work. 1. 1/07/2019 to till date at TATA STEEL LTD, [Gas Fired Boilers & Utilities] As Manager. TATA STEEL LTD, Jamshedpur [Gas Fired Boilers & BHEL Turbine] Designation: Manager– Boilers, Turbine & Utilities. (Joined as Manager on July,2019) 2. 15/10/2015 to 28/06/2019 LANCO ANPARA POWER LTD, Executive engineer. LANCO ANPARA POWER LIMITED, Anpara [2X600MW]
Designation: Executive Engineer (Joined as GET on Oct,2015) Jobs and responsibilities Handled:
• Preparing, Monitoring and Analyse Daily & Monthly MIS Report.
• Knowledge of TQM, IMS (ISO 9001, OHSAS 18001, ISO 14001 & ISO 50001).
• Operation & Maintenance of process equipment Boiler and Utilities, as per standard Industrial practices and O&M recommendations.
• Experience in making KAIZEN & 5S housekeeping practice and hand full experience in facing Boiler Inspectorate, EHS audits, Daily management audits.
• Projects to Achieve aux. power targets and improved in energy saving. SYNOPSIS
• Currently working as Manager “Boilers Turbine & Utilities” at TATA STEEL Jamshedpur.
• Worked with Lanao Anpara Power Ltd (2*600MW), Anpara as Desk Engineer and maintenance shift engineer.
• 5+ Year experience in Thermal Power Plant, Gas fired Boiler & Utilities: Operation & Maintenance of Boiler and Turbine (Make of BTG: Don Fang Electric Corporation), BHEL Turbine & Thermax Gas fired Boilers and Utilities like water treatment, Chiller, Compressor, DG, water heater, heat exchangers, Cooling tower.
• Qualified Mechanical Engineer from Shri Shankaracharya institute of professional management and technology, Chhattisgarh.
• Certified “Boiler Operation Engineer” by “Factories and Boiler, Kerala”.
• CEA certified training from Lanco Training and Development Center on Power Plant Familiarization.
• Including “Simulator Training of 660 MW” super-critical Thermal Power Plant.
•
ORGANIZATIONAL EXPERIENCE
• Maximize Equipment OEE with minimum Operating & maintenance cost
• Technical analysis, Preparing and Monitoring Daily & Monthly MIS Report.
• Improve availability & reliability of equipment (Increase MTBF, Decrease MTTR) by applying improvement & Maintenance techniques like TPM, MMM, Fugai free, CBM & PM.
• Handing over of equipment for Maintenance & Inspection and taking over after maintenance, issuance of work permits for hot & cold jobs including vessel entry permission, coordination with IBR authority for IBR Inspection of Boilers.
• Prepared Shutdown activity, Bar chart schedule, weekly condition monitoring. Monthly safety related documents following (RCA, JSA, NEAR MISS, UNSAFE ACT, all unsafe act rectified).
• Ensure regular review, forecasting, Ordering and maintaining the required Inventory as per norm and Consumption pattern.
• Responsible for raising the plant modification, making of the plant operation procedures
(SOP), trip reports and emergency procedures, analysing plant efficiency, etc.
• Knowledge of Emission, lube oil, water, ambient air analysis & compliance etc.
• Involved in projects related to Erection and commissioning works of utilities Equipment and new pipe line layout and modification.
• Having Experience of commissioning of over haul equipment and interlock protection & logic testing in co-ordination with C&I at invensys.
• Perform full range of managerial responsibility include but not limited to training and developing employees, planning, assigning a directing work, performance management, safety consciousness drive across plant area and bring-in safety standard and ensure safety of men & material.
KEY SKILLS
Operation and
Maintenance of industrial
Utilities, like
• Power plant and DG
• Boilers
• Water treatment plant
• Compressor
• Chiller
Expert in Boiler commissioning,
operation, Maintenance
• Gas fired Boiler
• HRSG with supplementary Gas
firing
• Furnace oil fired Boiler
• Coal fired Boiler (AFBC/PCF)
Power plant operation &
Maintenance
• Thermal power plant
• Cogeneration cycle power
plant
• Combined cycle power plant
Operation and Maintenance of
Water Treatment plant
• Softener plant
• DM plant
• RO plant
• ETP, STP plant
PLANT AND EQUIPMENT DETAILS: -
BOILER TURBINE
CHILLERS
Type: Vapour Absorption chiller
MAKE: Voltas Ltd.
Capacity: 100 TR
Purpose: Air conditioning of Main control room and Substations
Type: Vapour compression Chiller (Propane as a refrigerant) MAKE: Voltas Ltd.
Capacity: 100 TR
Purpose: Air conditioning of Main control room and substations COMPRESSORS
Multi Stage Oil Free Screw Compressor
MAKE: Atlas Copco
Capacity:
Purpose: Provide Instrument and service air
Centrifugal air compressors capacity of 3*5000NM3/hr with the pressure of 6.5 Kg/cm2
Evaporative, Induced Draught, Counter flow, Industrial models cooling towers Capacity of 10*7000 NM3/hr
Boiler Capacity- 68 TPH, 67 kg/cm2, 485 C, Type- (Gas fired), water tube, BI-drum, Natural circulation, Balanced draft system. Make- Thermax. 2*30 MW controlled extraction cum condensing BHEL Turbine.
Boilers Capacity- 68 TPH, 67 kg/cm2, steam temp-480 C, Type- HRSG Forced draft system. Make-IAEC, WESTER WORK, THERMAX.
Boiler Capacity- 2028 TPH, 168 kg/cm2, 540 C, Type- Pulverized Coal Fired, water tube, balanced draft system. Make-Dong fang.
Make-THERMAX
CAPACITY – 4*68 TPH/ 4* 100
TPH
WORKING PRESS. -65 KG/cm2
TEMP. - 490 DEGC
HEAT RECOVERY STEAM
GENERATOR (HRSG) with
SUPPLIMENTRY fuel FIRING
MAKE - THERMAX
CAPACITY – 3X100 TPH
WORKING PRESS. -106KG/CM2
TEMP – 510 DEGC
D
D
D
D
D
D
D
C
A
P
A
C
I
T
Y
-
3
0
M
W
B
a
c
k
p
r
e
s
s
u
r
e
s
t
e
a
m
t
u
r
b
i
n
Controlled extraction cum
condensing turbine
Make-BHEL
CAPACITY-30 MW
Back pressure steam turbine
MAKE- BHEL
CAPACITY-12.5 / 30 MW
PLANT DETAILS
Operation and maintenance of DM pant Capacity:17 m3/hr, Cooling tower, ensuring CW water within specified limit and monitoring the demand for blow down and chemical treatment of CW water, Ct fan efficiency calculation. Documentation: -
• To maintain Defect register, Communication register, Equipment change over records, All equipment SMP & SOP records, Permit register & safety permit records, Equipment oil change over schedule, All equipment running hour’s reports, Incident reports, plant availability reports, Monthly reports, Every equipment’s Spares replacement records.
• Involved in process safety drives and responsible for related documentation of COE, HAZOP, Risk matrix.
• Documenting and Maintain the Water Parameter & Control the Effluent Generation.
• Hazard Identification and Risk matrix assessment of all process.
• Planning and execution of small improvement utility project.
• Audit & implementing SOP & SP for Boiler Operation and Equipment’s. Achievements:
• Certified “Boiler Operation Engineer” by “Factories and Boiler, Kerala” in 2018.
• Received “Operation Excellence Award” on 26/01/2016 for saving unit from Emergency Tripping.
• Saved manual MFT due to APH trip by reducing unit load to minimum technical.
• Repair and maintenance of flue gas regulating dampers and making ID fan suction and discharge gates fully functional from DCS while working for maintenance team during unit over hauling.
• Involved in Commissioning of ACW system erection and commissioning in Power house at Tata Steel.
• Commissioning of vacuum pump chiller system to reduce Vacuum pump separator water inlet temperature.
• Active member of team made for “British 5 Star safety council.”
• Involved in team made for super heater and re-heater spray reduction project. 2015 Bachelor of mechanical engineering from SSIPMT, Raipur. [73.40%] 2011 12THfrom Central Academy, Kota. (C.B.S.E) [70.15%] 2009 10THfrom D.A.V Public School, Korba. (C.B.S.E) [80.00%] Project Title: Power Plant Familiarization [C.E.A certified]. Organization: Lanco Training and Development Center, Korba (C.G). Duration: 1 year Classroom &On Job Training.
Description: Basics of “Sub-critical & Super-critical” thermal power plant operation and operation cycle of plant Including “Simulator Trainingof 660 MW” super-critical plant.
ACADEMICS CREDENTIALS
TRAINING UNDERGONE
Project Title: Electricity Generation using road damper. Description: project focused on conversion of useful kinetic energy of moving vehicles through up and down movement of damper using simple mechanical equipment.
• Well versed with Windows, MS Office, MS Excel, SAP, PRO-E, C/C++ and Internet Applications.
Father’s Name : Mr. Kuldeep Singh Chauhan
Date of birth : 19th July 1993
Gender : Male
Languages known : Hindi, English
Nationality : Indian.
Correspondence Address : HNo.-07 Chandra Joyti Nagar Sonari, Jamshedpur-jharkhand. DECLERATION
I hereby declare that the information furnished above is true to best of my knowledge and belief.
Date:
Place: jamshedpur (Navneet Singh Chahan
ACADEMIC PROJECT
IT CREDENTIALS
PERSONAL DOSSIER
Contact this candidate