Engineer Engineering

Mark D. Jones

**** ****** **., ****** *******, Texas 77040

****.**.*****@*****.***

832-***-**** (M)

Page 1 of 3 Principle Engineer

PROFESSIONAL SUMMARY

Overview I am a Control Systems Engineer with project, construction, and start-up experience. My background includes P&ID development, project scheduling, manpower scheduling requirements, cost estimates, budgets, instrument calculations, technical evaluations, fire & gas, E&I subcontract drafts and field administration, supplier coordination, interfacing with other discipline engineers, plant engineers, plant technicians, construction teams, and manufacturer’s representatives. Recent work history involved LNG liquefaction, Fluid Catalytic Cracking, Diesel hydrotreater, Ethylene and propane dehydrogenation.

Job Objective Senior I&C or Project Engineering position for office or field work. Education Bachelor of Science Control Engineering from the University of Texas at the Permian Basin. EMPLOYMENT

Apr. 2011 to McDermott (CB&I)

Jul. 2020 Sr. Principal Control Systems Engineer

March 2020 to Borstar Bay 3 (Borealis)

Jul. 2020 Polyethylene Plant Expansion

Requisitioning Engineer assigned to work with support office to move various instrument requisitions along and to provide Bently Nevada with updated information for the machinery monitoring system purchased.

Jun. 2019 to Petrologistics

Mar. 2020 Propane Dehydrogenation FEED and Estimate Lead Instrument Engineer – Estimates for a grass roots FCCU based, Propane Dehydrogenation plant including offices, lab, warehouse and, maintenance shops for various capacities from 400 KTA to 670 KTA, spread sheet estimates, specifications, control philosophy, control system architecture plan, DCS and SIS layout, security plan, fire & gas layout and architecture, analyzer and continuous emission network and plan. Project included co-generation using natural gas or off gas. May 2015 to Cameron LNG (Sempra Energy)

Apr. 2019 LNG Liquefaction Project

Package Equipment Engineer - supervised and participated in Mechanical Engineering Package reviews and package control panel factory acceptance tests, reviewed control systems documents, control narratives, cause and effect diagrams, proposed instruments, wiring, installation drawings and worked with the Mechanical Requisitioning Engineer.

Site engineering support for mechanical packages, field engineering, commissioning support, engineering support of field instruments, pre-completion walk downs, review of equipment and installations for code compliance, specification compliance, subcontract technical compliance, accessibility and operability. Worked with Manufacturer’s representative during installation, for warranty issues and provided start-up assistance.

Apr. 2011 to REFICAR (Refineria de Cartagena )

May 2015 FCC Revamp with turbo expander and plant expansion Lead Instrument Engineer - FCCU and gas turbo expander generator. Prepared scope and phase 4

(EPC) estimate for the instruments and controls associated with the modification of the reactor and regenerator, cyclones, wet gas scrubber, new air compressors, main air blower controls replacement, the addition of a Safety Instrumented System, participated in HAZOPs, reviewed instrument data sheets, calculations, cause and effect diagrams, control narratives, replaced fire & gas system in brownfield, monitored I&C subcontracts in brownfield for subcontracts and procurement and maintained metrics on the FCC and revamp portions of the project. Demolition and installation drawings were marked with the scope of work for demolition and installation in phases for the project to keep the plant operating as long as possible.

Mark D. Jones

8402 Hanley St., Jersey Village, Texas 77040

****.**.*****@*****.***

832-***-**** (M)

Page 2 of 3 Principle Engineer

Site engineering support for all brown field instruments, expansion of tank farm, treatment, utilities, new installations units and work package pre-commissioning support. Jun. 2008 to Shaw Group(Stone & Webster)

Apr 2011 Project Engineer 5

Sep. 2010 to SK E&C Manabi

Apr 2011 Refinery FEED Project, Crude and Vacuum Distillation Units Developed P&ID Instrument Legend Sheets, reviewed Customer specifications, contributed to P&ID development, wrote control philosophy document, initiated the instrument database, did MOV and on/off valve datasheets, audited control valve and flow element calculations and datasheets and did the initial shutdown cause and effect diagrams.

Nov. 2009 to Exxon Mobil

Aug. 2010 Ethylene Plant

Engineering support of Mechanical Vendor Packages, furnace controls, factory inspections of skid mounted pump and turbine controls, verification of required vendor documentation and specialty regulator requisitions.

Jun. 2009 to Proposals, PEER Reviews and Checked Young Engineer’s Project Work Oct. 2009 Developed the Scope of Work for several small projects, manually marked P&IDs, provided examples of deliverables and estimated instrument man-hours. Monitored Young Engineers on small projects verified and checked deliverables, and supported the Proposals Department on a major refinery bid. Apr. 2009 to Petrobras

Jul. 2009 Steam Cracker PDP

Coordinated Client PDP and HAZOP comment updates and clarifications on P&IDs, instrument datasheets, cause and effect diagrams and control narratives. Jun. 2008 to Petrobras

Apr. 2009 HOFCC, High Olefins FCC Recovery, PDP

Lead Engineer on a C3 olefins PDP to obtain maximum propylene recovery from FCCU gas. Scope included control narratives, complex control descriptions, Cause & Effect Diagrams, inline instrument calculations, datasheets, ranges for inline and offline instruments and alarm and trip summary. My team in Houston supported the HAZOP in Brazil. I coordinated instrument engineering with Shaw’s Mumbai office.

Jul. 2001 to CB&I (ABB Lummus)

Jun.2008 Principal Control Systems Engineering Specialist Feb. 2007 to Valero Memphis and St. Charles Refineries Jun. 2008 FCC Revamp, VRU Modernization & Turbo Expander Feed Packages and Estimates Lead Instrument Engineer on FEED revamps and new FCCU flue gas turbo expander generator. Prepared scope and estimate for the instruments and controls associated with the modification of reactor and regenerator, cyclones, wet gas scrubber, new air compressors, main air blower controls replacement and the addition of a Safety Instrumented System. I participated in the HAZOPs and was responsible for preliminary instrument data sheets, calculations, cause and effect diagrams and write-ups were provided along with a phase 4 (EPC) estimate. Existing wiring diagrams were marked with the scope for the project. Wrote a subcontract to model the four main air blower control compressors to provide anti-surge and load sharing and the instrument construction subcontract. Nov. 2006 to PEMEX Low Sulfur Gasoline FEED (11 plants) Feb. 2007 Responsible for FEED quality inline instrument datasheets, database, and reviewing P&ID’s. Apr. 2006 to Borouge Olefins Conversion Unit FEED Package, Ruwais UAE Nov. 2006 Lead control systems engineer responsible for FEED engineering package, P&ID development, instrument calculations and datasheets, plan drawings, and contract deliverables. Feb. 2006 to Petrologistics Catofins Relocation and Ethylene Conversion Project Proposal, Houston, Texas Mark D. Jones

8402 Hanley St., Jersey Village, Texas 77040

****.**.*****@*****.***

832-***-**** (M)

Page 3 of 3 Principle Engineer

Apr. 2006 Proposal to convert ethylene plant to propylene using relocated Catofin reaction bay and compressors. Nov. 2005 to Fujian Ethylene FEED Project, China

Feb. 2006 Relief valve load determination calculations and preliminary relief valve size. Sept. 2004 to Loaned to Mustang Engineering,

Oct. 2005 Valero Refining projects at Ardmore, Aruba, Texas City, and Houston plants. Responsible for specifications, calculations, and field walk downs associated with the revamp of various units and preliminary work for new a Hydrocracker and Co-Processor at Valero in Ardmore, OK. Also helped with a bid package.

Jul. 2004 to SECCO Ethylene project close out documentation Aug. 2004 Project close out documentation to request payment submittals and change order proposal estimates. Apr. 2004 to SECCO EB/SM, Shanghai, China

Jun. 2004 Reviewed documentation for contract compliance and provided input to UOP process modifications. Sept 2003 to Lion Oil, Ultra Low Sulfur Diesel Hydrotreater, El Dorado, Arkansas April 2004 Lead control systems engineer responsible for detailed engineering package, maintaining schedule, budget, contract deliverables, change orders, quality checks, coordination with other disciplines, instrument specifications, datasheets, and requisitions. Apr. 2003 to Murphy Oil Hydrotreater Safety System Replacement Sep. 2003 Replaced Safety System with a Triconex Safety System, coordinated safety system construction and supplier documentation, and responded to other Hydrotreater construction issues sent to Houston. Aug. 2002 to SECCO EB/SM, Shanghai, PRC

Apr. 2003 Assisted with the control systems estimate for an extended basic engineering package, then accepted the lead position. Responsible for updating estimates, monitored man hours, schedule, database conversion from Enid to INtools, preliminary INtools instrument data sheets, and interfaced with the Detailed Engineering Contractor.

Jun. 2002 to Kizomba A, Exxon-Mobil

Aug. 2002 Assisted in the Factory Acceptance Test of the Emerson Delta V DCS and Triconex Safety Instrumented System (SIS) for an offshore Drilling platform. Witnessed testing of wiring, software, and graphics, documented the testing and verified the corrections. Jul. 2001 to Sabina C4 Project, Port Arthur, Texas May 2002 Reviewed and implemented HAZOP comments, participated in HAZOP reviews, P&ID representation, scope and budget analysis for field instrumentation, vendor package review, database entry for spec sheets, prepared Fire and Gas requisition, audited control valve data sheets, calculations, and miscellaneous instrument requisitions.

Previous employment and positions:

Stone & Webster Engineering Corporation - Sr. Technical Specialist

Allstates Design & Development - Electrical and Instrument Engineer

Brown and Root, Incorporated - Engineering Specialist III

McDonnell Douglas Technical Services Company - Engineer, Guidance and Flight Mechanics Professional American Society of Mechanical Engineers Organizations Instrument Society of America

Personal United States Citizen. Hobbies: stocks, remodeling, reading, camping, hunting, and fishing.

Contact this candidate