HC- * * B O X * * * * * • H A T I L L O, P R * * * 5 9

P H ONE:( W ) 787- 548- 2308, ( M ) 787- 503 - 8 4 5 6 • E - M A I L P E D R O L U I S . D E L R I O@G MAIL.C OM P E D RO L D E L R I O V A R GAS

OBJECTIVE

To obtain a challenging, meaningful professional level position related to my experienced area of work that allows me to learn continuously and gives me the opportunity for professional growth and advancement. PROFESSIONAL EXPERIENCE

May 2011 to present CIC Construction Group, S.E.

2020-2021: McNeil New USP Water Tank Project, Las Piedras, PR 2020: Lilly PR-15 Cogeneration Project, Carolina PR 2020: Tri Pharm Renovation Project, Morrisville NC 2019: AML-1-4-8 NGW Upgrade Project, Juncos P.R.

2018: Ocean Drive at Bahia Beach Resort. Rio Grande PR 2017: Palacio Dorado, Toa Alta, P.R. OSHA VPP

2016: AML-6 Tech Transfer Proyect, Amgen, Juncos P.R. 2015- 2016: Lilly MMC Project Warehouse PR-10

2014- 2015: Plaza del Mar Shopping Center, Hatillo, P.R. 2014: Amgen Manufacturing, Juncos, P.R.

2014: Lilly Core & Shell Expansion BLDG., Carolina, P. R. 2013- 2014: Abbott AMO Acrylic expansion BLDG., Añasco, P.R. 2012-2013: PUMA ENERGY Plant (Old Gulf Refinery),

Bayamon, P.R.

2012: Pfizer Llc. Vega Baja plant /Vega Baja, P .R. 2011-2012: FAA, ZJU San Juan cerap seismic upgrade, Carolina P.R.

EHS Coordinator for, Industrial Civil Contractor

As part of my duties, I’ve performed weekly safety toolbox meeting for the personnel and assist in the implementation of the safety program at our project. Provided safety training to our field employees in disciplines as: confined space, hazard communication, Excavations and trenching, PPE, Storm water protection etc., Compliance and support to plant EHS department.

My responsibilities also included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Provide job safety planning assessments permits (job hazard analysis) and required permits such as hot work, confine space, lock out, tag out, etc.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I prepared safety observations, reports to be discuss with company field personnel. Gave support and recommendations to supervision on corrective actions on job. Maintained the project cest plan according to Environmental management program. Current Palacio Dorado Project has been recently awarded for best practices on construction safety by PR OSHA Voluntary Protection Program

02/11 to 4/11 Maglez Construction Corp./ Pfizer Llc. Vega Baja plant /Vega Baja, P .R.

EHS Coordinator for Mechanical, Civil and Electrical contractor

Perform weekly safety toolbox meeting for the personnel and assist in the implementation of the safety program at our main offices such as our special projects around the island. Compliance and support to plant EHS department.

My responsibilities also included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Provide job safety planning assessments permits and required permits such as hot work, confine space, lock out, tag out, etc.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I prepared safety observations, reports to be discuss with company field personnel. Gave support and recommendations to supervision on corrective actions on job.

10/09 to 02/11 Quality Equipment Inc. /Bayamon, P .R. EHS Coordinator

Coordinated operator certifications, and annual certification for heavy mechanized equipment (cranes, tower cranes, elevators for construction, personal lifts). Perform weekly safety toolbox meeting for the personnel and assist in the implementation of the safety program at our main offices such as our special projects around the island.

My responsibilities also included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Provide job safety planning assessments permits and required permits such as hot work, confine space, lock out, tag out, etc.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I prepared safety observations, reports to be discuss with company field personnel. Gave support and recommendations to supervision on corrective actions on job.

07/09 to 10/09 Enersys Engineering Corp./ Bacardi corporation, Catano, P .R.

EHS Inspector

The project consisted in the construction of a Storm Sewer pipe line system.

My responsibilities included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Provide job safety planning assessments permits (JPSAs) and required permits such as hot work, confine space, lock out, tag out, etc.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I prepared safety observations, reports to be discuss with company field personnel. Gave support and recommendations to supervision on corrective actions on job.

2007 to 12/08 Alstom Caribe Inc./ San Juan Combined Cycle Project

/Palo Seco/ AES/Eco Electric Plants,San

Juan/Guayama/Guayanilla, P .R.

EHS Inspector

The project (San Juan plant) consists on the construction of two heat recovery steam generators (HRSGs). The steam generated by the HRSGs will be expanded in the two steam turbines. The combustion turbine and steam turbine generator electrical output will be generated at 13.8kv and be stepped up to 115kv through a dedicated combined cycle plant generator step-up transformer which will connect to the new gas insulated substation. Repair of steam generator (palo seco plant) 1 to 4, modifications, repair of existing fuel lines to storage tanks and modification of fuel lines to generator turbines. Modification and repair of generator and gas lines (Eco electric plant).

My responsibilities also included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Compliance with fire prevention program and emergency response program. Provide job safety planning assessments permits (JPSAs) and required permits such as hot work, confine space, lock out, tag out, etc.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I prepared safety observations, reports to be discuss with company field personnel. Gave support and recommendations to supervision on corrective actions on job. Also participated on weekly site safety walkthroughs with the project safety committee. The project has achieved 3.2 million man- hours without a lost time accident.

2006-2007 Rust Constructors Inc./ San Juan Combined Cycle Project San Juan, P .R., $250+M

EHS Inspector

The project comprises completion of engineering, procurement, demolition, construction, and star-up of a combined cycle power plant of approximately 464MW net output. The combined cycle consist of two Siemens Westinghouse combustion turbines, each of which will provide exhaust to one of two unfired multi-purpose heat recovery steam generators (HRSGs). The steam generated by the HRSGs will be expanded in the two steam turbines. The combustion turbine and steam turbine generator electrical output will be generated at 13.8kv and be stepped up to 115kv through a dedicated combined cycle plant generator step-up transformer which will connect to the new gas insulated substation.

My duties and responsibilities for this project were to coordinate new hire safety orientations for new subcontractors. Monitor that sub contractors requirements were in compliance before subcontractor was mobilized to job site. Give support to subcontractor safety personnel in the implementation of the project safety and health management program.

My responsibilities also included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Provide job safety planning assessments permits (JPSAs) and required permits such as hot work confine space, excavations, lock out, tag out, etc. Evaluate subcontractor’s JPSAs based upon job task description. Participate on rigging and crane operations. Coordinate weekly safety meeting with all subcontractors. Also coordinated weekly safety reps. meeting.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I Prepared safety observations, reports to be discuss with subcontractor safety personnel. Gave support and recommendations to subcontractors on corrective actions on job. Also participated on weekly site safety walkthroughs with the project safety committee. The project has achieved 2 million man- hours with out a lost time accident.

2005- 2006 Skanska USA Building Inc./ Wyeth DVS/Viviant Project, Guayama, P.R., $100M

EHS Coordinator/Manager

The project consisted of the construction of two new manufacturing cells for the DVS and Viviant (BZA) product line, to be located in the Packaging Goods Warehouse. Also included new utility infrastructure to support the manufacturing cells. Both are solid dosages one is wet process and the other is dry process.

During this project my responsibilities were to coordinate new hire safety orientations for new subcontractors. Monitor that sub contractors requirements were in compliance before subcontractor was mobilized to job site. Give support to subcontractor safety personnel in the implementation of the project safety and health management program.

My responsibilities also included performing daily and weekly safety field inspections. Gave support on reducing and eliminating hazards and unsafe conditions on job areas. Provide general plant work permits and safety task assignment permits and required permits such as hot work confine space, excavations, lock out, tag out, roof access, etc. Evaluate subcontractor’s job safety analysis based upon job task description. Participate on rigging and crane operations.

In addition to these duties, I performed accident field investigations, attended to first aid and “near miss” cases. I Prepared safety observations, reports to be discuss with subcontractor safety personnel. Gave support and recommendations to subcontractors on corrective actions on job. Gave support to Skanska EH&S director in the implantation and maintenance of the environmental management system program, ISO 14001.

2004- 2005 Skanska USA Building Inc./ Abbott Humira Project, Barceloneta, P.R., $300M

EHS Coordinator

The Humira project consisted of a four Stories Manufacturing Building, office and laboratory building. In addition warehouse, support building and related site development and infrastructure upgrades were made.

As project safety coordinator my duties were to coordinate new hire safety orientation for subcontractors. Provided work permits and special required permits such as excavations confine space, hot work, lock out-tag out, roof access etc. Perform field safety inspections.

As part of my responsibilities, I was required to investigate and inform any accident or “near miss” from subcontractors that can directly or indirectly involve any personnel under my supervision. In addition to this, I was also involved monitoring and assurances that the corrective actions are been performed and ensuring that all employees received first aid as required.

In addition to these duties, I was responsible to conduct weekly safety meetings with subcontractor’s safety personnel. Participate at daily morning coordination meetings with subcontractors prior work starts. Also involved in the project safety committee. Responsible also for implementations of the ISO 14001.

2003- 2004 Bermudez & Longo S. E. / Ely Lilly Humalog Project, Carolina, P.R., $15M

Safety Officer

As safety officer, I was responsible for conducting safety toolbox meetings. Prepared daily work permits for working crews. I also conducted daily field inspections, observing, eliminating and reducing hazards, and any unsafe conditions that were to involve any of our employees under my supervision or employees from other contractors working on the same areas.

In addition to my duties, I was required to turn in daily, weekly, and monthly reports to our client such as field inspections, equipment inspections, man-hours and accident field investigation reports. I also participated in weekly safety meetings.

3/03- 8/03 DIN Electrical Contractors Inc./ Pfizer Pharmaceuticals LLC., Barceloneta, P.R.

Safety Officer

As safety officer, I was responsible for the preparation of work permits, and required permits such as lock out tag out, confine entry, and line break etc. Also prepare job safety analysis based on job task descriptions. Discuss possible hazards with employees and create awareness and prevention.

My responsibilities also included conducting weekly toolbox meetings to employees. Perform daily and weekly site safety inspections. In addition, I also was required to investigate, document and inform of any first aid, near miss, and accident case.

In addition to these duties, I was required to assist to the weekly contractor safety meeting. Turn in weekly safety reports to comply with plant regulations and policies.

5/02- 12/02 Bird Construction Co./ Tren Urbano- Roosevelt Metro Station, Hato Rey, P.R.

Project Safety Manager

As Project safety manager I was directly responsible for the operation of the health and safety program for the current project. My responsibilities were to administer the safety program in compliance with the construction management of the project, Tren Urbano safety department and Road Authority requirements.

My responsibilities also included eliminating unsafe conditions not only for our employees but also to the general public since the project was located at a highly populated area were major office buildings and heavy traffic avenues.

As part of my responsibilities. I was required to investigate and inform any accident or “near miss” that can directly or indirectly involve any personnel under my supervision and the general public. I was also required to complete all reports pertaining to an accident or “near miss” these accidents also included personal damage, transit or property damage.

In addition to these duties, I was responsible for conducting a weekly safety tool box meetings once a week with all employees to discuss the importance of safety in the work areas, unsafe conditions of work and how to implement corrective actions as well as conducting a monthly inspection of all tools and equipment assigned to the work area to determine if they comply with precautions of safety standards in the industry. 10/00- 8/01 Mar-Land Industrial Contractors/ Wyeth Ayerst Lederle, Carolina, P.R.

Project Safety Supervisor

During this project my responsibilities were to conduct safety inspections in areas that were to be demolish and rebuilt. Gave support to the plant’s safety team. Compiled data, incident reports and forms.

In Addition monitor all construction work for compliance with plant and safety program.

2/00- 9/00 ICA Urban construction/ The Puerto Rico Coliseum, Hato Rey, P.R.

Project Safety Supervisor

For this project my duties were the implementation of the project safety program. Conducted daily safety inspections on job site. Also conducted weekly safety meetings. Monitor all construction work for compliance with the project safety program.

5/99- 2/00 Kiewit Construction company/ Tren Urbano-Rio Piedras Underground Rapid Transit System P roject, Rio Piedras, P.R. $ 250+M

Project Safety Supervisor

The project consisted in constructing a one-mile long tunnel and two stations for the Puerto Rico Highways and Transportation authority.

During this project my responsibilities were the implementation of the project safety program including compliance with the site safety policies and procedures.

In addition I conducted training, new hire orientation, drug policy program and weekly safety meetings. Also as part of my duties, I was responsible for monitoring all construction work for compliance with the safety requirements.

EDUCATION

2003 – Present Bayamon Central University Bayamon,P.R. Bachelor’s in science/Major in Safety and Health for the General Industry

Current degree in process

2017 – Metropolitan University Bayamon, P.R.

Atlantic Osha training center/ U.S. department of labor. Train the trainer -(Osha 502, construction industry outreach trainer refresher course).

2016-Competent person fall protection training. Hato Rey,P.R. 2016- CPR/AED/First Aid Training Rio Piedras, P.R. 2013 – Metropolitan University Bayamon, P.R.

Atlantic Osha training center/ U.S. department of labor. Train the trainer -(Osha 502, construction industry outreach trainer refresher course).

2013- North Safety Group Corp. Bayamon,P.R.

Successfully completed Safety training on Rigger and Hand Signal. 2012-Cranes and Heavy Equipment Institute of Puerto Rico Toa Baja, P.R.

Successfully completed safety training on Advance Rigging Techniques. 2012- American Red Cross Rio Piedras,

P. R.

Completed the requirements for Standard First Aid. 2009 – Metropolitan University Bayamon, P.R.

Atlantic Osha training center/ U.S. department of labor. Train the trainer -(Osha 502, construction industry outreach trainer refresher course).

2005 – Metropolitan University Bayamon, P.R.

Atlantic Osha training center/ U.S. department of labor. Train the trainer -(Osha 500, construction industry outreach trainer). 2004- North Safety Group Barceloneta, P.R

30-hours-Occupational safety and health training course for the construction industry.

2004- Antonio Ortiz General Industry Trainer Barceloneta, P.R. 10-hours- Occupational safety and health for the general industry. 2003- SHECS Corp. Arecibo, P.R.

10-hours Occupational safety and health for the construction industry. 2002- Commonwealth of P.R.,Dept.of labor, P.R. Osha, Hato Rey, P.R. 3-hours- Record keeping and reporting new osha 300 June 18, 1995- Antonio Luchetti Vocational High School, Arecibo, P.R. High School Diploma, Refrigeration and A/C (appliance) Technician certification.

SUMMARY OF QUALIFICATIONS

First Aid/adult CPR/AED/Environmental

Experience in the construction Safety Field in the Pharmaceutical industry as a safety coordinator, implementing and administering safety programs at company level as well as knowledge of OSHA standards.

Knowledge of Microsoft Word, Excel and Power Point. CIVIL SERVICE GRADES

1995-2003 E-4 Specialist, MOS 12B20 Combat Engineer U.S. Army, P.R. National Guard

Fort Leornardwood MO./ Aguadilla, P.R.

Civil, Mechanical. Work various locations. Fire prevention and protection in army base facilities.

LANGUAGES

Spanish, English

REFERENCES

Available upon request

Contact this candidate