Machine Electrical
Resume:
GY-AR O. NAVIDA
Address: Calamba Hills Subd., Barandal, Calamba, Laguna
Mobile : 092********
Email : ****.************@*****.***
OBJECTIVES:
To be part of a team where I can have fun while working, enhance my skills, and use my experiences effectively.
Obtain a position as a team-player in a people-oriented organization where I can maximize my customer-service experience in a challenging environment to achieve the corporate goals.
SUMMARY OF QUALIFICATION:
Over 15 years’ experience in General Maintenance specializing in Manufacturing/Production Operations
Highly skilled in performing routine maintenance tasks and repairs.
Knowledge on Industrial motor control, Electro-Pneumatic, Hydraulic and basic PLC.
In-depth Knowledge of preventive maintenance, mechanical system and automation.
Hands-on experience in work order systems
Demonstrated ability to communicate effectively with staff, residents, and the general public.
Proven ability to maintain parts, supplies, and equipment.
Can troubleshoot Electrical/Mechanical and Pneumatic problem.
Can setup, maintain, troubleshoot and support Anodizing and PVD process.
Can setup, maintain, troubleshoot and support Test equipment
Can repair and troubleshoot PCBA
WORK EXPERINCE:
EQUIPMENT TECHNICIAN SERCOMM PHILIPPINES INC.
August 17, 2020-Up to present Fillinvest Technology Park 1
Brgy., Punta, Calamba City Laguna
Duties and Responsibilities:
Provides technical support on the design and development of tools to be used in the operations
Ensure that preventive maintenance of assigned equipment is done properly and as scheduled
Ensure on-time delivery assignment as directed by his superiors
Supports Equipment &Test Engineering initiatives on LEAN and other related
Operate CNC machine, cutting machine, and other fabrication shop equipment in fabrication of jigs and fixtures used in operations
problems detected in the test line by providing feedback based on failure investigation results
Assist Test Engineers/Supervisors in identifying redundant test process and controls in order to meet high quality, yield, and acceptance high cycle time at optimum cost
Support production line equipment
MACHINE/EQUIPMENT HANDLED:
AUTO SCREWING MACHINE
ROBOT TESTING MACHINE
CO2 LASER MARKING
AGILENT SIGNAL ANALYZER
AGILENT SIGNAL GENERATOR
Automation Technician LEADING EDGE SYSTEM INTEGRATION CORP.
January 16, 2020-August 15,2020 Brgy., Poblacion, Sto.Tomas, Batangas
Duties and Responsibilities:
Provides technical support on the design and development of new machine required by costumer
Ensure that preventive maintenance of assigned equipment is done properly and as scheduled
Support setup, maintain, troubleshoot all equipment from costumer.
Support in rehabilitation of old machine to ensure that in good condition.
SR. MAINTENANCE TECHNICIAN TECHLOG CENTER PHILIPPINES
December 2012-January 15, 2020 Lot C3 10 Carmelray Industrial Park 2
Brgy., Punta, Calamba City Laguna
Duties and Responsibilities:
Provides technical support on the design and development of tools to be used in the operations
Ensure that preventive maintenance of assigned equipment is done properly and as scheduled
Support setup, maintain, troubleshoot Anodizing and PVD process.
Ensure on-time delivery assignment as directed by his superiors
Support site 1 and 2 continues improvement activities (Lean Manufacturing, Kaizen, etc) across the subassembly and mobile phone rework areas
Supports Equipment &Test Engineering initiatives on LEAN and other related
Operate CNC machine, cutting machine, and other fabrication shop equipment in fabrication of jigs and fixtures used in operations
problems detected in the test line by providing feedback based on failure investigation results
Assist Test Engineers/Supervisors in identifying redundant test process and controls in order to meet high quality, yield, and acceptance high cycle time at optimum cost
Conducts pre-production characterization of the test and measurement system, including but not limited to GR&R (Gauge repeatability and Reproducibility) and capability studies, correlation and electrical guard band analysis
MACHINE/EQUIPMENT HANDLED:
AUTO-BUFFING MACHINE, DELAMINATION MACHINE, COLD DELAMINATION
YQ-E0822 AUTOCLAVE MACHINE, STL-M0111 BUBLE REMOVING MACHINE
YQ-E0830 LAMINATING MACHINE, CONVENTIONAL MILLING MACHINE
TM-90-MKIII CHERUSAL PRE-ATTACHMENT MACHINE
TM-300P CHERUSAL BONDING MACHINE, EPILOG LASER FIBER MARK 30WATTS, LUMINANCE TESTER Model: Konica Minolta
HAAS MINIMILL VERTICAL CNC MACHINE, D4-E Hot Melt Machine
HANS UV LASER MACHINE, HANS YNS-X200-C5 LASER MACHINE
LTT CO2 LASER CUTTER MACHINE, TRUMPF 1000 LASER MACHINE
ANODIZING EQUIPMENT, AUTO SANDING MACHINE
LASER WELDING MACHINE Model: DMG-W200
UV LED EXPOSURE MACHINE Model: KST-7070-BLZX
FUKUDA Leak Tester MSZ-0910 Series, ANODIZING Bench Machine, PVD Machine, CO2 BOARD CLEANING MACHINE
REPAIR TECHNICIAN TECHLOG CENTER PHILIPPINES
November 04 2010-November 2012 Lot C3 10 Carmelray Industrial Park 2
Brgy., Punta, Calamba City Laguna
Duties and Responsibilities:
Responsible for the technical functions and understanding the condition of the PCB boards or track the possible cause of damage by diagnosing it using the schematic diagram depending on the model of the handsets.
Soldering and de-soldering of small components on PCB like IC, capacitors, etc.
Perform component and BGA soldering, including under-microscope soldering.
Perform repair of company’s wireless products.
Maintaining 100% expecting output for the performance of the line.
Provide support to customers on operational or maintenance aspects of equipment.
MAINTENANCE /Industrial Electrician TSUKUBA PHIL.DIECASTING CORP.
May 26- 2005 – October 31- 2010 Lot 1 & 2 block 15, phase 3
PEZA Rosario, Cavite
Duties and Responsibilities:
Responsible for the proper implementation of maintenance activities and giving initial assessment to all electrical/mechanical parts used in production to ensure availability and good condition of machines at all times.
Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tolls.
Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of breakdown and correct the problem.
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Advise management on whether continued operation of equipment could be hazardous.
Test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures, using testing devices such as ohmmeters, voltmeters, ammeters, to ensure compatibility and safety of system.
Doing Preventive maintenance on electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tolls.
Monitoring the performance of machine and equipment and implement solution on problem being encountered.
Perform electrical works (connect circuit breakers, transformers, installation of outlet, lighting and other electrical facilities.)
Prepare maintenance report after preventive maintenance on electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, for minor or major problems.
Do preventive maintenances on electrical or electronic wiring, equipment, appliances, apparatus, and fixtures as per schedule especially during weekend, no production scheduled, or even holidays as per required by the supervisor.
Conduct daily checking to all electrical or electronic wiring, of machines, equipment, appliances, apparatus, and fixtures. such as: (air compressor, generator set, air condition unit. motor pump, cooling tower, and other electrical facilities, including panel board, power room, main transfer switch and switch gear.)
Daily monitoring of electrical parameter in power room and switch gear.
Follows the procedures related to ISO 9001, ISO 14001, and OHSAS 18001 respectively.
MACHINE/EQUIPMENT HANDLED:
TOYO-DIECASTING MACHINE-Model: BD 125 V5, -125 tons
TOYO-DIECASTING MACHINE-Model: BD350 V4-T, -350 tons
TOSHIBA-DIECASTING MACHINE-Model: DC-H-92-135, -135 tons
HYUN DAE-PRESS MACHINE-Model: HDD-5, -5 tons
HYUN DAE-PRESS MACHINE-Model: HDD-2, -2 tons
TOYO ELECRIC CORP.- PRESS MACHINE-Model: trim, -5 tons
KROMAS-VIBRATOR MACHINE-Model: VM-600ED-SR, -5.5KW
CUMMINS-POWER GENERATOR-Model: 400DFEB, -400KW
AIRMAN-AIR COMPRESSOR-Model: SAS55SD-67, -55Hp
AIRMAN- AIR COMPRESSOR-Model: SAS22PSD-66, -22Hp
SHINKO- AIR COMPRESSOR-Model: S55HP, -55Hp
MITSUISEKI- AIR COMPRESSOR-Model: ZV22AS-R, -22Hp
HITACHI- AIR COMPRESSOR-Model: OSP-55S6A1, -55KW,75Hp
SHINKO-AIR COMPRESSOR-Model: S120HP, -120Hp
AIRMAN-AIR COMPRESSOR-Model: SAS75SD-68, -75Hp
MASTER 55-AIR DRYER-Model: MPE 075
MITUTUYO- MAESURING MACHINE-Model: BEYOND 707
MITUTUYO- MAESURING MACHINE-Model: BEYOND 504
TRAVELS/WORK RELATED:
POWERDE - SHENZEN CHINA
ACF TACKING MACHINE QUALIFICATION
March 2014
ASURION ATK – KAKEGAWA JAPAN
LINE AND MACHINE SET-UP (Laser Marking, Auto Buffing, Acoustic Testing, Luminance Testing)
January 26 - 31, 2015
FUKUDA Co. Ltd. – TOKYO JAPAN
FUKUDA MSZ-0910 AIR PRESSURE TESTER QUALIFICATION (Leak Tester)
July 17 – 19, 2018
TECHNICAL SKILLS:
Knowledge on Industrial motor control, Electro-Pneumatic, Hydraulic and basic PLC.
Knowledge in Milling Machine Operation.
Knowledge in CNC Milling Machine.
Familiarized on Air Compressor (Screw type and Piston type)
Knowledge in Refrigeration and Air-con maintenance and troubleshooting
Can perform Electrical works (installation of outlet, lighting and other electrical facilities.)
Knowledge and can operate Forklift, Overhead Crane, and Power Generator.
Knowledge in PC maintenance and troubleshooting hardware and software.
Knowledge to troubleshoot and repair several kinds of electronics and electrical appliances.
Knowledge in Cell Phone Repair, hardware and software.
Can read, Interpret electronics, electrical and mechanical diagram.
Knowledge in basic Solid works design and Feature Cam software
Knowledge in Microsoft office word, and Microsoft office Excel.
Knowledge in using and maintenance measuring devices such as Caliper, and micrometer.
Knowledge in using and maintenance testing devices such as ohmmeter, voltmeter, and ammeter.
Can operate machine and equipment, can work under pressure, flexible and hardworking, with good moral character.
Can troubleshoot Electrical / Mechanical and Pneumatic problem.
EDUCATION:
GREAT PLEBEAN COLLEGE
Consumer Electronics Mechanic
2003-2004
TRAINING/SIMINARS AND TUTORIAL ATTENDED:
RESOURCE ONE
Oil Spillage Seminar
TPDC Conference Room
October 2009
ROSWELL TRAINING CENTER
Tanza Cavite
Driving w/ Trouble Shooting
August 2007-November 2007
ROSWELL TRAINING CENTER
Tanza, Cavite
Computer Hardware Servicing
November, 2007-March 2008
ROSWELL TRAINING CENTER
Tanza Cavite
Cellphone Servicing
March 2008-June 2008
FAST-TECH TECHNICAL TRAINING CENTER
P1-113 Tejero Gen. Trias Cavite
Building Electrician
January 2010-March 2010
FAST-TECH TECHNICAL TRAINING CENTER
P1-113 Tejero, Gen. Trias Cavite
Refrigeration and Air-con Technician
June 2010-September 2010
MFI FOUNDATION, INC.
MFI Building, Ortigas Ave., Pasig City, Philippines.
Milling Machine Operation
July 15, 2012-August 12, 2012
GAYLAN TECHNOLOGIES
15 VCGT Complex, Meralco St. Manggahan, Pasig City
HAAS MINIMILL VERTICAL MACHINING CENTER SN 30080454
July 08-16 2013
PARTMAKER SOFTWARE SALES & SERVICES
Techlog Center Philippines
Delcam’s Feature Cam Mill3D Solid & Automatic Recognation
July 22-31 2013
OMRON ASIA PACIFIC PTE. LTD
Manila Representative Office
2129 Don Chino Roces Avenue corner Dela Rosa Street Makati City
Basic PLC Programming, Built-in Analog Function of CP1H, Pulse Output Function 0f CP1H
August 1-2 2013
Solar PV System
EME Training Room, Hectan Compound, Brgy., Halang Calamba, Laguna
Solar Installation and Maintenance Certification
September 28, 29-2019
OMRON ASIA PACIFIC PTE. LTD
Manila Representative Office
2129 Don Chino Roces Avenue corner Dela Rosa Street Makati City
PLC 101: Basic to Intermediate PLC
PLC 201: Motion Control
PLC 301: PLC Networking
August 6-16, 2019
PERSONAL DATA:
Date of birth: December 21, 1985
Place of birth: Burgos, Pangasinan
Religion: Roman Catholic
Nationality: Filipino
CHARACTER REFERENCE:
MICHAEL PIAMONTE CINDY TOMBUCON
Product Engineer 2 Test and Equipment Engineering Manager
TECHLOG CENTER PHILIPPINES TECHLOG CENTER PHILIPPINES
I hereby certify that the statement made by me are true complete and correct to the best of my knowledge and belief.
GY-AR O. NAVIDA
Applicant
Contact this candidate