Piping Engineer

Richard V. Perez

**** *. ********* ******, *** Del Pilar, Makati City, Philippines

Mobile: +639*********

E-mail: **********.***@*****.***

Skype: **********.***@*****.***

CAREER OBJECTIVE

Engineering professional with diversified experience and knowledge of principles and practices of piping engineering. I am willing to work in a responsible position with a view to make a notable contribution in the field of piping and pipeline engineering in an established organization.

SUMMARY OF SKILLS:

Well-versed with the concepts and practices of piping and pipeline

Engineering as well as methods of piping and pipeline stress analysis.

Sound knowledge of piping and pipeline materials, piping and pipeline industrial standards like ASME B&PV Code, ASME B31.1, B31.3, B31.4, B31.8, API610, WRC 107, JIS and etc.

In depth knowledge of designing piping and pipe line systems, valves and fittings.

Skilled in reading and interpreting technical drawings and specifications.

WORK EXPERIENCE

June 2015 - June 2020 Fluor Daniel Inc. - Philippines

Position: Pipeline Stress / Design Engineer

Projects: QUELLAVECO FRESH WATER PIPELINE, QUELLAVECO

RECOVERY WATER PIPELINE SYSTEM, LINE 21 KP158 LITTLE SMITH CREEK MEANDER AND K1A PIPELINE REPLACEMENT PROJECT

Job Responsibilities:

Performing Pipeline Stress analysis of Critical Systems in accordance with ASME B31.4, and B31.8 Code Requirements, using stress software (AUTOPIPE version 11.02) and define efficiently the layout and supports in order to provide enough flexibility to the Pipeline system.

Perform basic calculation such as Wall thickness, Upheaval Buckling and Road crossing calculation.

Responsible for preparation of Alignment sheet drawing, Typical and Crossing

Drawings.

Responsible for preparation of GA Drawings, Plan and Section details using AutoCAD.

Evaluation and review of pipe route analysis data, input of all design and operating conditions based on P&IDs, Line list, Material Specification, Equipment Vendor Drawing, and other conditions.

Develop and verify MTOs, equipment and bulk quantities against P&IDs and drawings.

Evaluation and review of Design basis and Hydraulics reports.

Review of Plan, Isometric, P&ID and other detailed and relevant drawings related to piping needed in the project to make sure that everything is conforming to the specification and standard.

Making Isometric Drawings for all the site routing lines and steam tracing as per site condition & Making As-Built Drawing for all Piping and Pipeline Isometrics, P&IDs and Plan Drawing.

Design coordination with other discipline, civil, mechanical and piping design.

Position: Piping Stress Engineer

Projects: LAKE CHARLES CHEMICAL PROJECT, FCCU/ALKY REVAMP &e

MARATHON TIER 3 ULSG

Job Responsibilities:

Performing Pipe Stress analysis of Critical Systems in accordance with ASME B31.3, Code Requirements, using stress software (AUTOPIPE version 09.06) and define efficiently the layout and supports in order to provide enough flexibility to the piping system. Provide guidance to piping designers to develop efficiently the required documentation.

Preparing and maintaining cost-effective piping and pipeline standards.

Identifying the stress critical lines from the P&ID and line list as per the Stress Specification. Preparing the Stress Critical Line list.

Preparation, evaluation and review of pipe route analysis data, input of all design and operating conditions based on P&IDs, Line list, Material Specification, Equipment Vendor Drawing, Pipe fittings and other conditions.

Responsible for static analysis of critical piping systems connected to Pumps, Heat Exchanger, Drums, Filters, Air Coolers, and Column.

Responsible for the design of the standard and special supports like spring hangers and Rod hangers.

Conversant with Modeling of Expansion joint, Trunnion modeling and Equipment skirt modeling and Underground piping.

Responsible for establishing load cases for Seismic analysis, Wind analysis, and Hydro test load cases, PSV and slug flow analysis.

Preparing the initial load data for the design of pipe racks.

Ensuring that the loads impose by the piping system to the relative equipment does not exceed the allowable load as per vendor information or WRC.

Design coordination with other discipline, civil, mechanical and piping design.

Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.

Accountable for the accuracy, completeness and timeliness of work ensuring proper configuration management and assuring the design standard criteria, practices, procedures and codes are used in preparation of plans and specifications.

November 2011 – November 2014 Korean Power Corporation Engineering &

Construction Company, Inc. (KEPCO E & C)

Position: Piping Engineer/Piping Stress Engineer

KEPCO E&C is a nuclear power design and engineering company in South Korea. It is engage in designing, engineering, and constructing nuclear and fossil power plants.

Project: UAE BARAKAH NUCLEAR POWER PLANT

Job Responsibilities:

Perform pipe stress analyses for ASME B & PV Code Section III Class 1, 2 & 3 piping, and ASME B31.1 using stress analysis programs such as PIPSYS. Ensure all piping systems conform to applicable codes and standards and validate all piping design and participate to design reviews.

Responsible for preparation and review of detailed static calculations of piping connected to high pressure vessels, air-coolers, shell and tubes exchangers, tanks, pumps, centrifugal/alternative compressors, turbines and etc.

Responsible for preparation and checking of dynamic analysis, modal shapes, PSV reaction forces, slug flow induced loads, vibrations and etc.

Responsible for identifying, calculating and design of suitable standard or special pipe supports.

Checking of mechanical/structural calculations, drawings and specifications.

Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.

Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring the standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.

Evaluation and transmission of equipment nozzle loads to mechanical team.

Responsible for preparation of design documents and plant changes in accordance with approved processes and design requirements and production of stress isometric drawings or stress sketches.

Preparation of stress report for each sub-system that contains all details, references and data used in the stress analysis.

Provide recommendation when needed on equipment, new concepts and techniques to improve performance, simplify construction and reduce costs.

January 2009 – November 2011 Hitachi Limited Philippine Branch (HIMAC)

Position: Mechanical Design Engineer

HITACHI, LTD. Phil. Branch is a multinational company in the country engaged in engineering design services for power plant systems located in Japan. I was assigned under nuclear department working on nuclear power plants.

Job Responsibilities:

Ensures integrity and safe operation of systems by verifying their structural and pressure retaining under design load conditions postulated to occur over the lifetime of installation of existing and newly build power plants.

Piping layout in 3D CAD application called COMPO-CAD and production of stress isometric drawings using CADIX and AutoCAD.

Performs stress analysis and flexibility of the strength of piping systems based from fabrication and civil drawings, piping & instrumentation diagrams (P&IDs) using SAUSER (Stress Analysis User) software.

Perform re-analysis of failed models and provides recommendation required such as support adjustment (addition, deletion or movement) and pipe route changed.

Production of mechanical calculations needed for modeling and other engineering data sheets for proposal and design stages.

Carries out project coordination meetings for gathering all information and inquiries with other engineers. Monitors project progress to ensure delivery of engineering packages within time schedule.

EDUCATION

June 2003 – April 2008 Nueva Vizcaya State University

Degree: Bachelor of Science in Mechanical Engineering

Bambang, Nueva Vizcaya, Philippines

June 1999 – April 2003 Nueva Vizcaya State Polytechnic College

(Laboratory School)

Bambang, Nueva Vizcaya, Philippines

June 1993 – April 1999 Sinturisan Elementary School

Sinturisan, San Nicolas, Batangas

ENGINEERING TOOLS:

Autopipe, Pypsis and Sauser

Smartplant Review

Microstation & AutoCad

Compo-CAD

Microsoft Office

Trainings Attended:

Leads Engineer Training February 2020

Coaching Matters Training August 2019

DDI Leadership Training June 2018

Advance Stress Engineering Training May 2016

Bentley Autopipe Training June 2015

Nuclear Power Plant (Short Course) November 2011 (South Korea)

Nuclear Piping Stress Analysis November 2011 (South Korea)

ACHIEVEMENT

October 2008 Mechanical Engineering Board Passer held by

Professional Regulatory Commission (PRC)

KEY SKILLS

Mechanical engineering design

Piping, Pipeline design & layout (COMPO-CAD, AutoCAD, MicroStation & Bentley Navigator applications).

Piping, Pipeline stress & flexibility analysis (Autopipe, SAUSER & PIPSYS applications).

Technical and Leadership skills.

Computer literacy: 3D & 2D CADD Applications, COMPO-CAD, SAUSER, PYPSIS, AUTOPIPE

And SPR.

PROFESSIONAL MEMBERSHIP

October 2008 – Present Philippine Society of Mechanical Engineers (PSME)

PERSONAL INFORMATION

Date of Birth: July 23, 1986

Place of Birth: Calaocan, Bambang Nueva Vizcaya

Nationality: Filipino

Status: Single

Interest: Photography. Fishing and Travel

CHARACTER REFERENCES

1.Name: Peter Jerome L. Doloroso

Position: Pipeline Engineering and Design Lead

Address: Fluor Daniel, Inc. - Philippines

Polaris Corporate Center, Lot 6 & 7, Block 1,

Spectrum Midway, Filinvest Corporate City.

Alabang Muntinlupa

Mobile No. : +639*********/+639*********

2.Name: Lee, Sang Rok

Position: Functional Group Leader

Address: KEPCO Engineering & Construction

2354 Yongudaero, Giheung-gu, Yongin-si,

Gyeonggi-do, 446-713 Republic of Korea

Mobile (S. Korea): 010********

3.Name: George A. Villamor

Position: Team Lead

Address: Hitachi Limited Philippine Branch (HIMAC)

10th Floor Tower 2, RCBC Plaza, Ayala Avenue cor.

Sen. Gil Puyat Avenue, Makati City, 1200 Philippines

Mobile No. : +639*********

Contact this candidate