Corrosion Engineer
Resume:
Email: adka3y@r.postjobfree.com Cell: +92-300-***-**** Home: +92-21-349*****
RESUME TEMURI, MAQSOOD UZ ZAMAN
NOTE: With job offer my points will be sufficient to apply for immigration to Canada. I have visited Canada multiple times with reference to Thermo- Electric Generators procurements. Have MS Materials degree from SIU-C, USA.
PROFESSIONAL EXPERTISE
DESIGN & ENGINEERING, INSTALLATION AND COMMISSIONING OF CATHODIC PROTECTION SYSTEMS FOR PIPELINES, TANKS, WELL CASINGS, MARINE STRUCTURES, THERMAL POWER PLANTS, AND CONCRETE RE-BARS. BID PREPARATIONS, CORROSION INDUCED FAILURE INVESTIGATIONS, PLANNING, PROCUREMENTS AND GENERAL MANAGEMENT; INCLUDES, OPERATION & MAINTENANCE OF CP SYSTEMS; WELL CONVERSANT WITH NACE MR0175; PROGRAM EXCEL MACROS & VB.
ECDA (External corrosion direct assessment)
C-Scan, PCM, DCVG and Pearson Surveys
Holiday Detection
(CIPS) Close Interval Potential Survey
Soil Resistivity Surveys (Wenner 4 Pin and Geonics EM34 Conductivity meter)
Design, Engineering, Installation and Commissioning of Electric Heat Trace Systems for Pipelines and Tanks
PERSONAL
Name : Maqsood-uz-Zaman Temuri
Mailing address : C-6, Pak Tameer Plaza, Gulshan-e Iqbal Block-14, Karachi-75300, Pakistan
E-mail : adka3y@r.postjobfree.com
ACADEMICS
MS Engineering : Southern Illinois University at Carbondale, USA – 1988 with specialization in Materials Science
Thesis : Prevention of Oxidation of Carbon-Carbon
Composites by Oxide Films
AFFILIATIONS
Professional Member : MICorr (Institute of Corrosion, UK) Professional Engineer : Pakistan Engineering Council Corrosion Certification : Senior Corrosion Technologist, National Association of Corrosion Engineers, Houston
TRAININGS/CERTIFICATES
1. Prevention of Corrosion in Chemical Industry, NACE-SOFTEC 2. Control of Corrosion by Coatings, NACE-SOFTEC
Cell: +92-300-***-**** Home: +92-21-349*****
Page 2 of 8
3. Finance for Non-Financial Executives – Pakistan Institute of Management Sciences
4. Basic Corrosion Course – NACE
5. Bio Fouling – National Institute of Oceanography, Karachi POSITIONS HELD
1. Graduate Assistant (Teaching/Research), during studies till 1988 Southern Illinois University at Carbondale, Carbondale, Illinois, USA. 2. General Manager (Corrosion Prevention Services), Nuricon Group of Companies since Dec 1993 to date.
SOME OF THE JOBS CARRIED OUT
1. Internal Cathodic Protection of Oil Coolers (Sea Water) – Survey, Design
& Engineering – Pakistan Steel
2. Internal Cathodic Protection of Water Jackets of Condensers (Coolant: Sea Water) – Pakistan Steel
3. Internal Cathodic Protection of Oxygen Coolers (Coolant: Sea Water) – Pakistan Steel
4. Feasibility Study for the Corrosion Prevention of sea water pipelines Ø1800mm – 9km long – Pakistan Steel
5. Inspection of (In-situ) Internal Cement Mortar Lining of sea water pipelines Ø1800mm – Pakistan Steel
6. Inspection of (in-situ) Internal Cement Mortar Lining of sea water pipelines for Oxygen Plant, Ø600mm – Pakistan Steel
7. Inspection of Painting for Cooling Towers – Pakistan Steel 8. Inspection of Painting/Coating, Billet Mills – Pakistan Steel 9. Inspection of Bituminous Coatings of Sea Water Pipelines – Pakistan Steel
10. Pearson Survey, Pipe to Soil Potential and C-Scan Survey of Ø20” – 65km long, Mari-Guddu Gas Pipeline, 1989 – WAPDA
11. Evaluation of the Existing Cathodic Protection System of the Mari-Guddu Gas Pipeline, 1989 – WAPDA
12. Refurbishment of damaged coatings of Mari-Guddu Gas Pipeline, 1991- 93, WAPDA
13. Revamping of the Cathodic Protection System for Mari-Guddu Gas Pipeline, 1991-93 – WAPDA.
14. Soil Resistivity Survey of 600 MW Thermal Power Plant at Guddu, 1989 – WAPDA
15. Structure to Soil Potential Survey of the 600 MW Guddu Thermal Power Plant, 1989 – WAPDA
16. Evaluation of Existing Cathodic Protection System for Ø72” Cooling Water Network at Guddu Thermal Power Plant (having deepwell ground beds, 200 ft deep), 1989 – WAPDA
Cell: +92-300-***-**** Home: +92-21-349*****
Page 3 of 8
17. Evaluation of CP system for Ø16”-9km long Gas Pipeline Sui-Guddu, 1989
– WAPDA
18. Evaluation of CP System for Ø20”-60 km long Kandhkot-Guddu Gas Pipeline, 1989 – WAPDA
19. Design of Cathodic Protection System for 600MW Guddu Thermal Power Plant, based on (200ft) deepwell groundbeds, 1989 – WAPDA 20. Installation of Cathodic Protection System for Guddu Thermal Power Plant
– WAPDA
21. Installation of Insulating Flanges on Mari-Guddu Gas Pipeline, 1991-93 – WAPDA
22. Engineering of Cathodic Protection System for Ø6” and Ø8”-20 km Tando Alam-Pasaki Oil Pipeline, 1995 – OGDCL
23. Engineering and Design of Cathodic Protection System for Ø4”-2 km Lashari flow line, 1996 – OGDCL
24. Design & engineering of cathodic protection system for Ø8”-3 km Gas Pipeline at Sadqal, 1995 – OGDCL
25. DCVG Survey of ø16”-6km long PARCO-Jimco White Oil Pipeline, 1996 – Shell-Caltex-PSO (Joint Owners)
26. Soil resistivity, PSP, E-log I Survey for 59 Well Casings, 1996 – Mari Gas Company Limited (MGCL)
27. Preparation of Tender Documents for the cathodic protection system for well casings of Mari Gas Field, 1996 – MGCL
28. Preparation of Feasibility Study Report for Mari gas field well casings’ cathodic protection, 1996 – MGCL
29. Feasibility study for the cathodic protection of Tank Bottom exteriors
(AST’s), 1996 – Shell Pakistan
30. Evaluation of the cathodic protection system for Laghari Facilities, 1996 – Union Texas Inc.
31. Installation and commissioning of the cathodic protection system for ø6”and 8”-20 km Pasaki-Tando Alam pipeline, 1996-97 – OGDCL 32. Cathodic protection of oil storage tank bottom exteriors (in collaboration with Raychem Technologies, Inc.). CP system is based on Anodeflex ®, a continuous impressed current polymeric anode. This system is used for the first time in Pakistan. 1996-97 – Shell Pakistan 33. Cathodic protection of Ø16”-6 km PARCO-Jimco pipeline. (In collaboration with Raychem Technologies, Inc.). CP system is based on Anodeflex ®, a continuous impressed current polymeric anode. This system is used for the first time for a pipeline in Pakistan. 1996-97 – Shell-Caltex-PSO (Joint Owners)
34. Supply, installation and commissioning of cathodic protection system for Lashari pipeline, 1997-98 – OGDCL
35. Supply, installation and commissioning of cathodic protection system for Sadqal pipeline, 1997-98 – OGDCL
Cell: +92-300-***-**** Home: +92-21-349*****
Page 4 of 8
36. Feasibility study for the cathodic protection of flow lines and well casings at Bobbie and Mithrao fields, 1998 (project in hand) – OGDCL 37. Soil resistivity survey, Design and Detailed Engineering of Dia. 36” and 56” x 10 km Water Pipelines for Rawalpindi Development Authority (Owner), Mot McDonald (Consultant), work done as a Sub-contractor for M/s. Muhammad Ayub Brothers (Main Contractor), 1999 – RDA 38. Supply, Design & Engineering, Installation, Test and Commissioning of CP Systems for 4 Nos. Retail Outlets (Filling Stations) of Pakistan State Oil, 1998-99 – PSO
39. Design of CP system and preparation of tender documents for oil handling Steel Pile Piers at Karachi Sea Port as CP Consultant to Meinhardt, Pakistan Chapter (Main Consultant), in-hand project, 1999 – Karachi Port Trust
40. Evaluate Cased Piping, Design & Engineer CP System and Prepare BOQ/Tender Documents for the Pipelines at Installation C, Keamari, Karachi, 2000 – Shell Pakistan
41. Supply, Installation, Test & Commissioning of the CP System for Cased Piping at Installation C, Keamari, Karachi, 2001 – Shell Pakistan 42. Application of Heat Shrink Jacketing on PU Foam Insulated Re-routed 1.5 km x Dia. 10” Hot Fuel Oil Pipeline Section, Karachi, 2000-2001 – National Refinery/Rana Enterprises
43. Design/Engineering of 3 Parallel Re-routed sections of 1.5 km x Dia. 8” and 6” White Oil Pipeline Sections, Karachi, 2001 – National Refinery/Rana Enterprises
44. Design, Engineering, Supply, Installation and Test/Commissioning of CP Systems for Well Casings at Sawan Field (5 Wells), Installation Work in Progress – OMV Exploration Gmbh Pakistan
45. Design, Engineering, Procurement and Installation of Cathodic Protection Services for 23Km x 10” K-14 Flowline at KADANWARI –2003 – ENI Pakistan.
46. Fault detection, Rectification and Re-Commissioning of CP System of 8” x 4 Km Pipeline and 10” x 32 Km Pipeline at Lalpir-2003 – PSO. 47. Fault detection, rectification and Re-Commissioning of CP System of 16” Dia x 5.5 Km Pipeline at Jimco-2004 – PSO.
48. Design of Cathodic Protection System on Crude 2 Nos x Storage Tank
(183-S-4 / 183-S-5 of 160’ / 140’ Dia) at Korangi-2004 – National Refinery.
49. Design of Cathodic Protection System on Crude 1 No x Storage Tank
(155-S-42, 180’ Dia) at Keamari-2004 – National Refinery. 50. Supply and Installation of Cathodic Protection System for Tank Bottoms at PARCO’s Bubak Station-2004 – Al-Prince Engineers.
51. Turnkey Engineering Design, Procurement and Installation of Cathodic Protection System for Well Casing at Miano Field (Well No. 8)-2004 -- OMV Exploration Gmbh Pakistan
Cell: +92-300-***-**** Home: +92-21-349*****
Page 5 of 8
52. Turnkey Engineering Design, Procurement and Installation of Cathodic Protection System for Sacrificial Fire Water Main at Kadanwari Plant)-2004
-- OMV Exploration Gmbh Pakistan
53. Turnkey Engineering Design, Procurement and Installation of Cathodic Protection System for 1 No. Well Casing at Sawan Field-2004 -- OMV Exploration Gmbh Pakistan
54. Engineering Design of Cathodic Protection System for 26 Km under ground piping and 7 No. Well Casings.-2004 – Orient Petroleum Inc. 55. Audit of the Cathodic Protection System installed for protection of Plant Piping, Detailed Engineering Design for the Protection of Oil Sewer Lines, internal & external Protection of 03 No. condensate storage Tank and 02 no. Disposal Well Casings.-2005 – OGDCL
56. Design & Engineering for Cathodic Protection System for Underground Fuel Pipeline at Islamabad Airport.-2005 -- Shell Pakistan Ltd. 57. External Corrosion Direct Assessment and CP Audit of 170 km Gas Pipeline – 2005 – SNGPL.
58. Pipe Coating Survey including DCVG and C-Scan of 10” x 45 Km Gas Pipeline-2005 - OMV Exploration Gmbh Pakistan
59. Design Engineering Cathodic Protection System for 7 nos Well Casings at ZamZama Gas Field – 2005 – BHP Petroleum Pakistan
60. Cathodic Protection System Audit of various Fuel Oil Pipelines at Mehmoodkot and Machike – 2005 – PSO
61. Design Engineering of 6” x 28 km Condensate Pipeline from ZamZama to Parco’s Bubak Station – 2006 -- BHP Petroleum Pakistan 62. Rehabilitation and Rectification of CP System at Jimco and Lalpir for 16” x 5.5 km, 8” x 4 km, 10” x 32 km and 12” x 2.5 km – 2006 – PSO 63. Turnkey Engineering Design, Material Supply and Installation for 12” x 40 km Bobi-Sinjoro Gas Pipeline – 2006 – OGDCL
64. Designing of CP for underground Fuel Gas Supply System for Takoradi Thermal Power System at Ghana, Africa – 2006 - Petrochem Engineering/GE Capital
65. Rectification CP System & Repair of Coatings. Designing of CP System for 5 x flowlines, 2 x sales gas lines, condensate tanks & u/g plant piping. – 2006 -- BHP Petroleum Pakistan.
66. Turnkey Engineering Design, Material Supply and Installation & Commissioning of Cathodic Protection System for 27 nos x Well Casing at Qadirpur based on ThermoElectric Generators.- 2006 – OGDCL 67. Turnkey Engineering Design, Material Supply and Installation & Commissioning of Cathodic Protection System for 21 Nos Well Casing based on Thermo Electric Generators, Flowlines and 8 nos Storage Tanks at Bobi and Kunnar Field-2007 – OGDCL
68. Design of 10 nos x Well Casing and Flowlines at Mari Gas Field based on ThermoElectric Generators.—2008 – Mari Gas Company. Cell: +92-300-***-**** Home: +92-21-349*****
Page 6 of 8
69. Turnkey Engineering Design, Material Supply, Installation and Commissioning of 1 Nos x 42.5 m Storage Tank for both External and Internal-2008 -- National Refinery/AJC Engineers.
70. Design, Material Supply and Installation of Internal Cathodic Protection of 4 Nos Vessels-2008 – DDFC.
71. Engineering, Design, and Installation of Supply and Installation of External and Internal CP System of 8 nos Storage Tanks - 2008--Presson Descon Int’l / MOL
72. Engineering, Design, and Installation of Supply and Installation of External CP System of Plant Piping – 2008 -- Presson Descon Int’l / MOL. 73. Turnkey Engineering Design, Material Supply, Installation and Commissioning of 6 Nos x 60 Ft Storage Tanks based on Anodeflex System.-2009 -- National Refinery/Al Tariq Constructors 74. Design, Installation and Commissioning Services at Tando Alam Oil Complex, Chanda, Mela and Bahu Field for Well Casing, Flowlines and Storage Tanks - 12 Nos Well Casings based on Solar Power Units, 48 nos Storage Tanks and 77 km of various flowlines – 2009 – OGDCL 75. CP Audit of Mirpurkhas / Khipro Block facilities and associated pipelines.- 2009 – BP Pakistan.
76. Turnkey Engineering Design, Procurement, Installation Supervision & Commissioning of all Station Piping including Firewater, Oil Water, Close Drain Piping and 1nos x 52 m Storage Tanks.—2009-10 – China National Chemical Engineering Co/PARCO Refinery.
77. Turnkey Engineering Design, Material Supply and Installation & Commissioning of Cathodic Protection System for 8 Nos Well Casing based on Thermo Electric Generators. – 2009-10 – OGDCL 78. Turnkey Engineering Design, Material Supply, Installation and Commissioning of 9 Nos Storage Tanks at Islamabad Airport and 5 Nos. Tanks at Quetta Airport – Shell Pakistan Ltd.
79. Turnkey Engineering Design, Material Supply, Installation and Commissioning of Cathodic Protection System for 4” x 15 km Pipeline.- 2009 – MOL Pakistan/Jaguar Pakistan
80. Turnkey Engineering Design, Material Supply, Installation and Commissioning of Cathodic Protection System for 2 Wells at Miano Gas Field-2010 -- OMV Exploration Gmbh Pakistan.
81. DCVG Survey of 104 km Pipeline at MKK Concession – 2010 – BP Pakistan
82. External Corrosion Direct Assessment and Integrity of 107 Km Pipeline – 2010 – PSO.
83. Design and Engineering of Cathodic Protection System for 3 nos Well Casings and 2 x Fire Water Lines at Chachar Field.- 2010-- Pakistan Petroleum Ltd.
84. External Corrosion Direct Assessment and Integrity of 16 km Pipeline at Sono, Dhabi and South Mazari Pipelines – 2010 – BP Pakistan Cell: +92-300-***-**** Home: +92-21-349*****
Page 7 of 8
85. Turnkey Engineering Design, Material Supply and Installation & Commissioning of Cathodic Protection System for 17 Nos Well Casing based on Solar Power System at UCH – 2010 – OGDCL
86. Engineering, Design, and Installation of Supply and Installation of External CP System of 6 nos. Tanks and 10 Nos. LPG Bullets at Makori Field.-2011 – Presson Descon Int’l / MOL
87. Engineering, Design, Supply Installation and Commissioning of CP System for Flow lines and Sales Gas Pipeline – 2011 – Polish Oil & Gas Co. (PGNIG) Pakistan Branch.
88. CP Audit of Shell Islamabad, Quetta and Karachi Airports-2011 – Shell Pakistan
89. Operation and Maintenance Services of CP System at Qadirpur and Bobi Field.-2011—OGDC
90. Design, Engineering, Supply, Installation and Commissioning of CP System for Latif 5, 6, 7, 9 Wellhead Casings and Flow lines based on Solar Power System.-2012- OMV Exploration Gmbh Pakistan. 91. CP Audit of Shell Sukkur and Nawabshah Airports-2012-- Shell Pakistan 92. Turnkey Engineering Design, Material Supply, Installation and Commissioning of 6 Nos. Storage Tanks at UCH Gas Field.-2012 - Zealcon Engineering/Oil & Gas Development Co. Ltd
93. Turnkey Engineering Design, Material Supply and Installation & Commissioning of Cathodic Protection System for Well Casing, flow lines and plant piping based on Thermo Electric Generators at KPD and TAY Field. (In Progress) -2013 – OGDCL
94. Turnkey Engineering Design, Material Supply, Installation and Commissioning of CP System at 1 No. Storage Tank at PARCO Mid Country Refinery, Qasba Gujrat.- 2014- IKAN Engineering/Pak-Arab Refinery Limited
95. Design, Engineering, Supply, Installation and Commissioning of CP system of Additional Pipeline for Chiller Project at Engro Chemical – 2014
- Al-Tariq Constructors / Engro Chemical
96. DCVG, PCM and CIPS Survey of around 69 KM pipelines at different locations-2014- United Energy Pakistan Ltd.
97. Design of CP System at Naimat Basal-II facility - 2014- United Energy Pakistan Ltd.
98. Supply and Installation of Test Post at Sawan Field – (In Progress)-2015 - OMV Exploration Gmbh Pakistan.
99. Technical Audit of Hub Power Station Cathodic Protection System – 2015
- International Power/Hubco
100. Turnkey Engineering Design, Material Supply, Installation and Commissioning of CP System at 1 No. Storage Tanks – 2016 – FAUZ Engineering Ltd.
101. Installation of CP System at Naimat Basal-II facility – 2015 – United Energy Pakistan.
Cell: +92-300-***-**** Home: +92-21-349*****
Page 8 of 8
102. Engineering, Design, and Installation of Supply and Installation of External and Internal CP System of Tanks and Vessels at PPL Gambat Field. – 2015 - Presson Descon International / PPL 103. Design, Engineering, Supply, Installation and Commissioning of CP System for Mehar 1,2,3, Wellhead Casings. NGM and Flow lines based on Solar Power System – 2016 - OMV Exploration Gmbh Pakistan. 104. Design, Engineering, Supply, Installation and Commissioning of External and Internal CP System for 5 Nos. Knock Out Drums–2016 - AJ Corporation/Attack Petroleum Ltd.
105. DCVG and CIPS Survey of around 21 km pipelines at different locations. – 2016 - United Energy Pakistan.
It’s a long list. If further update of corrosion-oriented works is required then kindly advise.
Contact this candidate