AQEEL

A. AL-

ATTAR

Chief Engineer M.S. degree of

Mechanical (Metallurgical)

Engineering.

• Midland Refineries Company MRC,

Daura, Iraq (10 years).

• The State company of Automobile

Industry and Equipment SCAIE,

Alexandria, Iraq (5 years).

• Basra Oil Company, Iraq (3 years).

• Chief Mechanical Engineer,

• Expert Test Analysis and

Optimization of Materials Properties,

• Metals, Alloys, Materials

Tester,

• Manufacturing (Metallurgy,

process) Engineer.

- Birthyear, Place: 1980, Baghdad-Iraq,

- Nationality: Iraqi,

- Marital Status: Married,

- Gender: Male,

- Address: MO, USA,

- Permanent residence in USA,

- Email: adk6uv@r.postjobfree.com,

adk6uv@r.postjobfree.com,

adk6uv@r.postjobfree.com,

adk6uv@r.postjobfree.com,

- Phone: work: 1-573-***-****

Home: 1-573-***-****

Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

Provisional Summery

I am a Metallurgical Manufacturing Engineer with a M.S. degree. in Mechanical (Metallurgy) Engineering.

I have about 11 years’ experience in this field. My practical experience was rests on supervising of metals, alloys and composite materials manufacturing and managing of engineering parts and equipment maintenance. I am expert engineer in the manufacturing, production of engineering equipment with providing precise examination and analysis of the results.

I am an expert to work with Capital project management, Vendor management system, Operational technology (OT), Supervisory control and data acquisition (SCADA), Computerized Maintenance Management System

(CMMS), Distributed Control Systems (DCS) and Programmable Logic Controllers and Process Control PLC..

Education

• Studying a Second Master Degree of Mechanical and Engineering, Mechanical Engineering, Mechanical Engineering Department-James McKelvey School of Engineering, Washington University in St. Louis, MO, USA (present).

• Master’s degree of Mechanical and Metallurgical Engineering, Production Engineering and Metallurgical Department, University of Technology, Baghdad-Iraq 2006 (3 years from 2003 to 2006).

• Bachelor’s degree of Mechanical and Metallurgical Engineering, Production Engineering and Metallurgical Department, University of Technology, Baghdad-Iraq 2003 (5 years from 1998 to 2003). Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

Languages

Arabic Native Language

English

Reading Listening Writing Speaking

Work History

Research and Expert of Engineering Task

• 2/7/2019 thru 8/22/2020, a researcher. Mechanical and Aerospace Engineering, Missouri University of Science and Technology-MO, USA.

(full time),

(I studied and analyzed the results of examinations and inspections to improve the metals (alloys) equipment and devices performance, when used under specific and critical working conditions. I worked on extracting effective and influencing values and providing recommendations for each study).

• 5/12/2018 thru 2/1/2019, a researcher. Materials Research Center/Missouri University of Science and Technology, MO, USA. (full time),

Programming Languages

C++

Python

JavaScript

Java

Programs Skills

Microsoft Office programs

Auto Cad designer program

Mini Tap program

MATLAB

ANSYS

Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

(I have conducted studies on superalloys and ways to improve specific properties for special functions, by improving their surface properties using advanced coating methods or by using advanced surface hardening methods).

• 3/2009 thru 10/2015 Nanotechnology and Advanced Materials Research Center and Energy Research Center/University of Technology, Baghdad, Iraq. (part time)

(I made researches on engineering materials with nano-scales, nano-structures, and coating methods for nano-layers).

• 6/1/2015 thru 1/1/2016, visiting researcher. Materials Science and Engineering and Materials Research Center/Missouri University of Science and Technology-MO, USA. (full time),

• 7/4/2011 thru 2/16/2014 Expert Engineer with Engineering Industrials manufacturing factories and Lab/Ministry of Industrials and Minerals MIM, Baghdad, Iraq. (part time),

(I supervised a specialized of engineer’s and technicians’ team, to study and determine engineering working age of machines and equipment, anticipate failure and supervise the periodic checks of the engineering parts).

• 3/16/2009 thru 6/13/2014 Expert Engineer, The State company of Automobile Industry and Equipment SCAIE, Alexandria, Iraq. (part time),

(I supervised and followed up on the continuous production line, handling interruptions, overcoming errors during work. Monitoring the performance of worker and technicians, and the performing periodic inspection of the equipment and devices).

• 8/12/2010 thru 2/7/2014 Mechanical Engineer, Basra Oil Company BOC, Iraq. (when need advice),

(Supervising the work performance of devices and equipment that working under elevated temperature and high pressure, conducting periodic checking inspections).

Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

• MRC/ 1/27/2007 thru 1/10/2018 Mechanical Engineer (Junior, Senior, and Chief), Midland Refineries Company MRC, Daura, Iraq. (full time),

(Supervising the work performance of devices and equipment that working under elevated temperature and high pressure, conducting periodic checking inspections. Checking hydraulic devices).

Engineering Experience

• Worked with iron, aluminum, copper, nickel, titanium … etc, metals and their alloys.

• Design and implementation of manufacturing processes.

• Hydraulic and Electric machine system.

• Assembly mechanical parts (sub-assembly, partial, and full) system.

• Maintenance and repair of assembly mechanical component parts line.

• Welding and joining processes of same and different alloys.

• Advisory protection coating and painting methods Engineering Consulting Office- University of Technology-Baghdad.

• Fulfilled output requirements while consistently reducing scrap levels.

• Expert of evolution and development of testing and inspection results.

• Modeling, design and Simulation programs.

• Optimization of the materials quality inspections and tests results.

• Predicted the failure of production parts.

Training Certificates

• Baghdad University/Al-Qiffaf Company,

FTIR (8400S SHIMADZU); software, sample preparing and hardware

(six weeks),

XRD (6000 SHIMADZU); software, sample preparing and hardware

(four weeks),

AAS Atomic Absorption spectrophotometer (SHIMADZU); software and sample preparing (six weeks),

Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

• Baghdad University /Nbaa A. Al-Salam Company,

SPM Scanning Probe Microscope (AA300); software and sample preparing (ten weeks),

• Baghdad University /Al-Muqtsidq Company,

Hardness & Optical Microscope tester; sample preparing and hardware

(three weeks),

• University of Technology, Baghdad,

Laser, Liquid and Solid Materials Surface Treatment (three months), MIG, TIG and CO2 welding (five months),

Estimated and Evaluated the Crack and Failure course (two months),

• University of Technology, Baghdad,

Xometry CNC Machined Metal and Plastic Prototypes & Production Part AS9100D ISO9001 (6 months),

Assembly line methodologies course (3 months),

After sales service course (3 months),

• Missouri University of Science and Technology-USA, SEM Electron Microscope; software, sample preparing and hardware

(one month),

XRD; software and sample preparing (one month),

Nano-technology workshop (one month),

Advanced Biomaterials (three months),

• The Due Run, MO, USA,

West recycling internship (3 months),

Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

References Information

1- PhD. K. Chandrashekhara (KC),

Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO, 65401, Office: 188 Toomey Hall,

www.mst.edu/~chandra adk6uv@r.postjobfree.com.

2- PhD. Lokeswarappa R. Dharani.

Curator's Distinguished Professor and Senior Investigator in the Graduate, Materials Research Center.

adk6uv@r.postjobfree.com.

3- PhD. Xiaodong Yang,

Associate Chair for Graduate Affairs and Associate Professor of MAE Associate Editor, Optics Express, The Optical Society (OSA) Missouri University of Science and Technology, Rolla, MO,

adk6uv@r.postjobfree.com http://web.mst.edu/~yangxia.

4- Prof. PhD. Sami Aboalnoon Ajeel,

Vice Chancellor for Administrative affairs/ University of Technology, Faculty of Nanotechnology and Advanced Materials Center, adk6uv@r.postjobfree.com.

5- Prof. PhD. Alaa Abdulhassan Atiya,

Vice chancellor for scientific and postgraduate affairs/University of Technology, Faculty of Materials Engineering Department, adk6uv@r.postjobfree.com.

6- Nihad Hanash,

Assistant general manager, Ministry of Industrials and Minerals-Baghdad- Iraq,

adk6uv@r.postjobfree.com.

Aqeel A. Al-Attar

M.S. degree of Mechanical (Metallurgical) Engineering, University (College) Researcher, Mechanical (Metallurgy) Engineer, Expert Test Analysis and Optimization of Materials Properties

MO, USA

adk6uv@r.postjobfree.com, adk6uv@r.postjobfree.com Permanent residence in USA Work: 1-573-***-****, Home: 1-573-***-****

7- Ali Tariq,

Supervisor of Engineers, The State company of Automobile Industry and Equipment SCAIE, Alexandria, Iraq,

adk6uv@r.postjobfree.com.

8- Ihsan Abdul AL Jaber,

General Manager, Basra Oil Company, Iraq,

ihsan .adk6uv@r.postjobfree.com.

9- Supervisor Nawal Ezat,

Manager Director, Midland Refineries Company MRC, Daura, Iraq, adk6uv@r.postjobfree.com.

Reference sites

1- MST, Materials Research Center, Straumann’s-James Hall, 401 W. 16th St., Rolla, MO 65409-1170, 573-***-****, 573-***-****, https://mrc.mst.edu, adk6uv@r.postjobfree.com.

2- MST, The Aerospace Simulations Laboratory,

http://web.mst.edu/~hosders/Serhat_Hosder/Home.htl. 3- University of Technology, Production Engineering and Metallurgy, Nanotechnology and Advanced Materials Research Center, Baghdad, Iraq, http://pmp.uotechnology.edu.iq/index.php/.

4- Ministry of Industrials and Minerals, The Central Lab., Baghdad, Iraq, http://www.industry.gov.iq/indexphp?name=Pages&op=page&pid=133. 5- Midland Refineries Company MRC, Daura, Iraq,

https://mrc.oil.gov.iq/index.php.

6- Basra Oil Company, Iraq,

https://www.dnb.com/business-directory/company-

profiles.basra_oil_compny_(boc).bdf67d44c8dabdb9c0469842c0390177.ht ml.

7- The State company of Automobile Industry and Equipment SCAIE, Alexandria, Iraq,

http://scai.industry.gov.iq/English/CMS.php?CMS_P=1.

Contact this candidate