Mechanical Engineer Engineering

Surname: GROMMES

First Name: Dieter

Date of Birth: 18 November 1955

Nationality:

Passport

Driver License

Married Status:

Location:

German

German. Expired date 24.06. 2024

German. Expired 01.Jan. 2033

Single

Germany qnd Batam Indonesia

Languages: German

English – Good level

Qualifications:

Education – Secondary Level

General Secondary School – Germany

University Level

ATH Rheinstahl Duisburg School; of Industrial Mechanical Cuxhaven (Germany) College: of Marine Officer Engineering, Field Ship Operation Technical (Mechanical Engineer)

Courses / Trainings:

Intensive Training Courses:

Industrial Mechanics for Ships with Integrated Crew. Lifeboat and Fire Prevention Course.

Coastal Machine Operators Course.

Summary of Experience:

Mechanical Engineer and Field Service Engineer for over 23 years involved with working contracts within the oil, gas, and petrochemical industries. Working with multinational companies as BP, Shell, Esso, Exxon, Chevron, Saipem, ARAMCO, Toyo, and Hyundai to name a few.

Also served as Chief Engineer with two shipping companies trading worldwide. Knowledge, skills & Abilities:

Travelled and worked extensively worldwide and resident in the Middle East for 12 years. Technical engineering support and inspection on site. Quality control and guidance and supervision on large projects. In depth engineering experience in compressor servicing and pre - commissions, 23 years Rotating Equipment Engineer. Technical engineering support and inspection on site. Quality control and guidance and supervision on large projects.

Centrifugal Compressors (API 617 – ISO 10438), Centrifugal Pumps (API 610 – ISO 13709), Couplings (API 671 ), Gear Boxes (API 613, 677 – ISO 13691), Seals (API 610, 682), Oil & Seal Systems (API 614), Gear Compressors API 617, screw compressors (API 619 – ISO 13631), reciprocating compressors API 618 – ISO 10441-1. Diesel Engine. Basic knolege in Electro technic.

Curriculum Vitae

Vibration analyse. Familiar with relevant Codes & Standards, ISO – ANSI – A STMA- DIN norms. Safety awareness and quality control capabilities; Manage and control of work undertaken by contractors; Project engineering expertise; Experience with H2S products; The ability to liaise effectively in two languages. Training for client: Dry and wet gas seals and rotating basic know how. Area of responsibility: Troubleshooting, interface agreement, Material inspection, Safety, Acceptance specification: of all Compressors with driving Machine. Special: Process gas valves – Oil and Cool water units

In the course of duties have worked in many locations, and adaptable to supervising sometimes under difficult conditions nationalities from many countries.

A selection of work locations has included Europe, Middle East, Iran, Taiwan, Libya, Japan, Peru, Singapore, Korea, Thailand and China, India

E – Mail to: **************@*****.**

Phone number +628********** Indonesia

Details of Experience

April 2017 to November 2019

Global Field Serice Middle East GmbH

Iran and Rotating – Siemens Equipment installation Services GmbH Air Liquide World Wide – Metenance Siemens Equipment From October 2014 to 2017 Spencer Odgen/ Borsig ZM Compressor service Asia and Middle East.

05,May 2014 to August 2014

Senor Supervicor

GKN International. Coupling and break service.

From October 2013 to 23Dec.2013

SGS Inspector in order from Technip France and Shell. Final inspection Siemens Compresser – Steam Turbine Unit Inspector by Factory – Inspection of oil unit – control panel – compressor and turbine. Observation all test and test runs of this unit. Inspection by supplier all test of the steam condenser. Material control of pipes Review all documents. [MBA] Open box and close box inspection. Observation of boxes shipping. Turbine and Compressor bearing control. DGS compressor control. Turbine rotor balance control. Cleanness of compressor culverts and compressor – turbine with endoscope check. From May 2013 Freelancer. Base in Germany.

Emergency on ships.

August 2012 to February 2013 - 3 month contract with WEIR Iraq Mechanical Engineer

Gas turbine and pumps units installed. Overhaul of pumps and overhead crane. From April 2011 to July 2012: Elliott Turbomachinery SA Mechanical Engineer

Based in Bahrain

Maintenance of compressors and steam turbines in KSA and Qatar 2009 to 2011 Thomassen Compression System.

Mechanical Engineer: Piston and centrifugal compressors. Base in Dubai U.A.E. Service center for Middle East. Pre – commission of reciprocating compressor units in Qatar and maintenance on centrifugal compressors in Iran, .

Pre commission: 8 reciprocating compressor. Install: Piston and stuffing box. Alignment of the one bearing Motors. Check crankshaft and Instruments. Check all contractor work they have done without Thomassen supervisor in according to Thomassen drawing and API. Troubleshooting. In Saudi: Change rotor from Ansaldo E – Motor and alignment motor. Germany: Shell Heide. Change on Thomassen centrifugal compressor Seal design. Wet gas seal to dry gas seal. Iran: Tabritz Refinery.

GE Berry gas compressor: Change seal and bearing design. Wet gas seal to dry gas seal. Measure all new demission of compressor end cover for the new design of dry gas seal to according to Burgmann drawing. Prepare new bearing house for new bearing design. Adjust rotor to running position. October 1989 to August 2008.

Siemens PGI – Germany ( Ex Mannesmann DEMAG – DELAVAL) I was responsibility of maintenance work on gas compressor and pre – commission of compressor units with drive machine [E - engine / steam turbine / gas turbine] All work was carried out with local companies or employees of the customer. Number of employees was 10 person min up as not really manageable in countries like China and Iran. Among the new projects included measurement of foundations, installation of coolers and compressors with oil units. Observation the pipe work and pressure test of the cooling water - oil - process lines. Check that all supports of the piping are installed correctly and sufficiently. Cleanness of all pipes and pipe stress connected to the units, the connection of the pipes. Installing from instruments; in according to the P&ID. Installed: of instrument cables into junction box. Ensure that all control devices are installed correctly and in the correct position. Organize the transport of materials; to the construction sites and storage. Organized work on site. Unfortunately, it does not always work as planned and changes have to be made at short time. Daily kick of meeting and discussed with the site management and the individual groups for the status of work.

Information the staff about safety threats and risks factors for human and the material. Observation; from safety rules are maintained.

Daily reports to the head office or to the project manager. Senior Supervisory Engineer for gear and centrifugal Compressors. (Worldwide service) 1984 to 1989 Schepers Shipping Company – Germany Served: Second Engineer and Chief Engineer. 1979 to 1984 Contour Shipping – Germany Served: Third Engineer. 1975 to 1979 Served: in the Military – non-commissioned officer - Minesweeper Squadron. 1971 to 1975 ATH Rheinstahl Duisburg. Germany

My history in brief:: by DEMAD; main projects. Between the main projects: some maintenance on some compressors.

For example change dry gas seal or complete overhauling compressors – pumps – gear box – supported maintenance on turbines.

Project side engineering: Mannesmann DEMAG – DELAVAL. 2003 Siemens assume control Mannesmann DEMAG – DELAVAL February 2001 to October 2001 South Korea: Customer Air Products. Pre Commission and Commission one air centrifugal compressor unit included Motor 25 MW, Oil and Water system. All oil and water pipes made to order the isometric and lay out drawing. Process side: IGV; Vibrations probe, instrumentation and atmospheric exhaust valve. Sometimes training; for Client staff in: Basic rotating equipment or dry and wet gas seals. Area of responsibility:

Installation: instrument cable to the J. B.

Troubleshooting, interface agreement, Material inspection, Safety, Manage and control of Works Under taken by contractors January 2002 to August 2002 Qatar: Customer Qatar Gas Split line leaking on sour gas centrifugal compressor. Troubleshooting with Ras gas and DEMAG. Order from Germany: Send this compressor back to Germany and install from another train the compressor on this train. Reason was the process pipes from the other train was not now installed.

The mechanical part was standard work. Some pipe work and pipe stress must be done out of my work scope. But it was in my responsibility.

Only the transport organisation was new for me. The rotor must be in a separate box. The reason was not the 5.5 ton. weight. It was the size of the packing box at the compressor. I find out, 1 big box is more expensive then I send 2 smaller boxes to Germany are fewer prizes than 1 big box. 2002 – 2003 Iran 3 place. Customer: Alstrom Sweden. Commission: 6 natural gas compressor. (Gas pump station for gas pipe lines) 2003 to 2004 Back to back man KSA Jubail for 2 projects. First project: 17 deference size of Berry centrifugal compressors new installation with Motor or steam turbine. Size of compressors units: 11MW to 35MW. Kind of gas: propylene – ethylene and sour gas. Customer Saudi ARAMCO/AMECO

Second project: Linde gas 3 air compressors (gear compressors) units with motor; new installation. Main compressor 40MW and volumetric flow rate 1st stag inlet 320000 cubic meters. Booster compressor 16MW and 40 bar end pressure.

Small compressor 6 MW and 86 bar end pressure.

December 2004 to March 2005: China Wuhan. Customer: Linde gas. New installation: 2 gear compressors units with Motors. Main compressor 35 MW and volumetric flow rate 1st stag inlet 280000 cubic meters. Booster compressor 16 MW and 80 bar end pressure.

June 2006 to September 2006 KSA

General overhauling: 7 Berry natural gas compressors. Customer: SABIC 2007 – Peru. Customer: DOE RUN

Process analyse and overhauling a gear compressor. February 2008 – to March 2009. Kuwait. Project name EQUATE. Customer: Air Liquide. New installation: 2 gear compressors with 20MW Motor.

Contact this candidate