SIJIN.K
QA/QC
(MECHANICAL)
Email- adk3t3@r.postjobfree.com
Mob -+973********
CURRICULUM VITAE
BE Mechanical engineer having more than 10 years of working experience in HVAC,Engineering Inspection, testing during fabrication and construction in industrial project CAREER SUMMARY
Having experience in HVAC industry & Industrial project as QC inspector. Well versed with Structural / Equipment / Hvac / Welding / Civil inspections
OBJECTIVE
To obtain a challenging position commensurate with my professional experience in a progressive, growth oriented company. To work for organization that recognizes an individual’s abilities, talents and accomplishments.
PROFESSIONAL QUALIFICATIONS
1) B.E. Mechanical Engineering
2) ASNT LEVEL II in-
• Radiographic Test
• Ultrasonic Test
• Magnetic Particle Test
• Dye Penetrant Test
• Visual Testing
CAREER SUMMARY
• Worked with SANPAR MICROFILTERS PVTLTD-HVAC (2011-2017)
• Worked with AIRMECH COMPANYW.L.L (2017-2020)
• Working With DELTA CONSTRUCTION W.L.L (2020-Till working)
• Experience in HVAC,Structural Erection,Equipment Erection,Process Piping,Civil,welding,Roofing and Cladding
DUTIES AND RESPONSIBILITIES
Material receiving inspection and documentation.
Quality surveillance, Welding Inspection, Documentation & Dimensional Check.
ITP (Inspection and Test Plan) Preparation.
Ensure that all execution & inspection are carried out as per inspection plan/drawings/codes &specifications
To prepare the inspections reports, internal NCR’setc.
Check all ducts are installed as per approved drawing
Check chilled water pipe installation and Pressure test
Check Air balancing of FCU’S during the time of Testing and Commissioning
Closing of NCR’S
Preparing Snag List
Coordination with Client inspector for inspection
Method Statement Preparation and Review
Review of material approval request
Perform and witness UT, MPI, LPI, VT.
Review fabrication/erection, documents and work quality in terms of specification, workmanship and other variables as indicated in the above-mentioned documents as per requirements of QC standard operating procedure and client’s specification.
Conduct fit-up and visual inspection of all piping and welding works from piping pre-fabrication to field installation.
Prepare and schedule required NDT request including, for visually accepted joints to cope up with the NDT percentage requirements per line class including welder’s performance percentage.
Familiarize with Approved Drawings, Governing Standards and Specifications.
Conducting Welders Qualification Tests.
Supervision of QA/QC activities related to Structural, HVAC, Equipment, Piping and Civil.
Hydro testing of erected piping systems.
Familiar with various Welding process like GTAW, SMAW.
To initiate Inspection requests for client’s monitoring inspections.
To ensure the calibration/validation of measuring instruments. PROFESSIONAL EXPERIENCE:
CURRENT COMPANY: DELTA CONSTRUCTION COMPANY W.L.L
Designation : QA/QC Engineer
Working : From 2020 August till working
Project : Hilton Garden Inn 4 Star Hotel@ Avenues (22 Storeys) Consultant : SSH
Job Responsibilities
Material receiving inspection and documentation.
Quality surveillance, Documentation & Dimensional Check.
To prepare the Inspections reports (MEP), Daily Progress at site (MEP), Site attendance (MEP).
Coordination with Client inspector for inspection.
Review of material approval request.
Supervision of QA/QC activities related to HVAC &PLDR
Check all ducts are installed as per approved drawing
Check chilled water pipe installation and Pressure test
Check Air balancing of FCU’S during the time of Testing and Commissioning
Check Water supply Pipe, Condensate drain pipe and drainage line installation as per drawing
Check LPG gas line pipe installation and Pressure test
Preparing handover documentation
Closing of NCR’S and Site observation
Preparing Snag List
Site Meeting with Consultants and Clients.
Material inspection approval as per the project specification.
Preparation of Operation & Maintenance Manuals.
PREVIOUSCOMPANY: AIRMECH COMPANYW.L.L
Designation : QC Inspector
Period of Working : From 2017 July to 2020July
Project : AlbaPotline-6, Anode Rodding Shop Expansion project Client-Outotec/Bechtel (2017-2019)
Job Responsibilities
Preparation of Inspection and Test Plan(ITP)
Ensure that all execution and inspection are carried out as per inspection plan / drawings / codes & specifications.
Material receiving inspection and documentation.
Preparing inspection request as per Inspection and Test Plan
Coordination with client inspector for inspection.
Line checking, mechanical and QC clearance of hydro test packages.
Perform line checking/prepare and check official test pack prior to release for hydro testing by ensuring that all welding inspection and NDT activities affecting the quality of welds contained in each piping spools of an isometric have been completed and accepted.
Review fabrication/erection, documents and work quality in terms of specification, workmanship and other variables as indicated in the above-mentioned documents as per requirements of QC standard operating procedure and client’s specification.
Conduct fit-up and visual inspection of all piping and welding works from piping pre-fabrication to field installation.
Prepare and schedule required NDT request.
Performing inspection of welds, NDT, hydro testing, pneumatic testing, weld repair of pressure & non pressure equipment’s in fabrication & welding Pipeline
Ensure all inspection activity as per approved ITP and the work as per approved method statements
Organizing & conducting welder qualification tests. Identifying welding defects
Conducting PQR and WQT as per the requirement of work scope
.
Credit of verifying that the instruments (pressure gauges, hygrometer, DFT gauge, surface profile gauge, thermometer, etc.) were calibrated and review of certificate
Responsibleforstagewisepainting/coatinginspectionasperthelineclassandlinesystem.
Responsible for incoming painting/coating material inspection/handling/storage/mixing as per project specifications.
Check location, Elevation, Orientation of Structural columns
Check cumulative alignment of erected structural members
Verify all bolts are torque with required torque value
Checklocation,Centreline,orientationofanchorboltpriortoequipmenterection
Check alignment and Level of installed equipment.
Verify all civil inspections are carried out as per approved ITP and Method statement
Monitor the bitumen paints are kept in a proper storage area with MSDS
Ensure proper curing at site
Check reinforcement as per approved IFC drawings. Raise an inspection request for the same.
Check concrete temperature,slump,Time with third party and prepare internal concrete pour report
Prepare compaction report layer by layer internally.
Develop manufacturer Record book as per client specification. PREVIOUSCOMPANY: SANPAR MICROFILTERS PVT LTD(INDIA) Designation : QC Engineer
Period of Working : From 2011 February to 2017 June Project : HVAC systems (Air Dryers, Air Chiller, Water Chiller, Air Filters.Etc..) Job Responsibilities
Inspect the incoming materials received from stores.(Like Copper pipe,flanges,sleeves,MSelbow,MS plate, pipe..Etc.)
Prepare an inspection report on the material inspected.
Vendor inspection (Condenser dimensional inspection, Compressor continuity test, raw materials inspection and verify the test certificate).
Carried out Fit Up and Welding visual inspection
Conduct Hydro test and Pneumatic test for filter housings as per design parameter..
Conduct Pneumatic test ofAir manifold at given pressure.
To check the piping connection (Copper piping)is done as per drawing.
Conduct refrigerant leak test for all brazing joints and refrigerant line by using leak detector, to identify the leak
Conduct performance test / Run test of Dryers, Dehumidifiers and Chillers (Check all parameters like inlet outlet temperature, pressure, Velocity, Suction, discharge temperatures...)
Prepare performance report of the product.
Verify insulation is done proper.
Check filter element is made as per drawing, measure dimensions as per drawing. CERTIFICATION
2 years 4months work Experience certificate from Outotec in the project of Alba potline6, Expansion project.
Safety Appreciation from Outotec
ASNT NDT Level-11 in UT/RT/MPT/LPT/VT
PERSONAL DATA
Name : Sijin.k
Dateofbirth : 19.06.1989
Sex : Male
Nationality : Indian
PassportNo : P7574602
DrivingLicense : YES
MaritalStatus : Married
ComputerSkill : MS Office
Permanentaddress : Jyothis (H)
Kolari .P.O
Kannur District
Kerala, India
Pin-670702
Languages known : Malayalam/English/Hindi/Tamil/Kannada DECLARATION
I, hereby declare that all the above mentioned information is true and authentic and all the references will be provided at your request. Thanking you and looking forward to your reply at the earliestconvenience.
Sincerely,
SIJIN