Engineer Power Plant

Name Soomin Park

Position Process Engineer

Nationality Canadian

Qualifications Professional Engineer in Alberta, Canada

General 20 years’ experience in Process Engineering for Refinery and Oil & Gas projects

Contact ********@****.**

1-403-***-**** (Canada) / 965-******** (Kuwait)

Professional Summary

Process design experience in Refinery Projects including Heavy Oil Upgrading, Hydro- processing, Ethylene Unit, Light End Recovery Unit, Sulfur Recovery Unit

Experience in Pre-commissioning and Turnover activity of Refinery Hydrogen and Sulfur Block.

Process design experience in SAGD Units (Upstream EOR) including CPF, pipeline and Utility Units.

Experience in Project Management Consultancy Service for Oil & Gas industry.

Process design experience in Natural Gas Processing Units; Oil & Gas Separation, Natural Gas Treating, NGL processing and LNG tank terminal.

Responsible for the Commissioning and Start-up operation for Thermal Power Plant (Flue Gas De-Sulfurization Unit)

Experience of participating to Process Hazard Analysis (PHA) – such as What If, HAZOP, LOPA and PSSR.

Experience

FDH JV, Kuwait Oct. 2016 – Present

Pre-commissioning Lead for Hydrogen Block of Al-zor REFINERY PJ.

Preparing the procedure for the pre-commissioning actives.

Planning and supervising pre-commissioning activities of mechanical and piping work; leak testing, chemical cleaning, oil flushing, air blowing, pump & compressor running test, catalyst loading.

Interfacing with Company reporting on pre-commissioning work progress and schedule.

Lead Piping (& Process) Pre-commissioning and Turnover Engineer for CFP refinery PJ (Amine Recovery UNIT, Sour Water Stripping Unit and Sulphur Recovery Unit)

Reviewed the QA/QC ITP’s and related documentation requirements.

Plan and supervision of the pre-commissioning activity for the mechanical and piping including specific method statements, P&ID mark ups.

Provided technical assistance for the Mechanical Completion and Turnover.

Assisted pre-commissioning activity for the CW pump; Running Test and Circuit Flushing.

Supported commissioning activity

Technip Engineering, Bangkok, Thailand Apr. 2015 – Mar. 2016

Principal Process Engineer on onshore-division

Participated in planning, cost development and management, and scheduling for the ongoing projects.

Determined the scope and plan for the Construction and Engineering phase during the proposal activities.

Managed and led complex technical discussions with third parties of licensors and suppliers.

Lead Process on APICO Gas Plant Project/ Natural Gas Processing, Detail Engineering-

Executed the Design Report for H2S management study, Hydrate formation study etc.

Equinox Engineering, Calgary, Canada Oct. 2014 – Mar. 2015

Lead Process Engineer for Apache Wapiti Gas PLANT SHALE Gas Treating and NGL PJ (Natural Gas Processing, FEED)

Executed pre-Feed Design; preparation of process design basis, simulation (Hysys) Heat & Material balances and Equipment data sheets.

Toyo Engineering, Calgary, Canada Mar. 2012 – Sept. 2014

Lead Process Engineer for Jacos Hangingstone PJ (SAGD Process, Upstream Detail Design)

Preparation of process design basis, development of process options and optimization of the selected design.

Participated in layout reviews, model review, design reviews, and HAZP study.

Vapor Recovery Unit (VRU) analysis; load calculation as well as sizing of the VRU header using Flarenet.

Updated O/M manual for SAGD system.

Lead Process Engineer for North West Upgrading Project (Refinery, FEED)

Executed all aspects of FEED and Pre-Detail Design for Light-end Recovery, Amine Recovery and Sulfur Recovery Unit)

Executed process design for columns, drums, heat exchangers, tanks and developed respective process data sheets.

Harvest Energy, Calgary, Canada Dec. 2010 – Dec. 2011

Process Manager for Black Gold PJ (SAGD Process, Upstream Detail Design)

Worked in Project Management Team.

Performed regular and timely technical reviews of engineering deliverables.

Approved specifications and operating instructions for SAGD process of Well-Pad, Pipeline and CPF.

Reviewed contractor’s pre-commissioning and commissioning plans.

Technip USA, Claremont, California Nov. 2008 – Jan. 2010

Senior Process Engineer for Saudi Aramco, RasTanura PJ (Ethylene Process, FEED)

Executed all aspects of FEED Design

Preparation of P&IDs, Datasheets, Cause and Effect Diagram regarding Liquid Cracker Ethylene plant including Cryogenic Process.

Bantrel Inc., Calgary, Canada June. 2005 – July. 2008

Lead Process Engineer for Suncor MVU PJ (Heavy Oil Upgrading including Delayed Coker Unit, Detail Design)

Involved in the debottlenecking studies for CDU (Diluent Recovery Unit), VDU, Delayed Coker to find the insufficiency of VDU capacity using Pro-II simulation

Worley Parsons, Calgary, Canada June 2004 – June. 2005

Lead Process Engineer for Christina Lake Regional PJ (SAGD Process, Upstream Conceptual Design)

Executed Fuel Alternative Study for Steam Generator, Study for Oil Treating Options, and Production Lift Method Study for (Gas Lift and Water Injection for Thermal EOR).

Jacobs Canada, Calgary, Canada Nov. 2003 – May. 2004

Senior Process Engineer for HAWIYAH PJ (Natural gas Processing, FEED)

Development of process design using process simulators,

Preparation of Process Flow Diagrams, Material and energy balances for Natural Gas Treating Units.

Bantrel Inc, Calgary, Canada Jun. 2002 – Oct. 2003

Senior Process (System Engineer) Engineer for Suncor Energy Light Naphtha Hydro treating Project (Refinery, FEED)

Developed P-T diagrams by analyzing the normal and upset condition and Flow Diagram

Executed process systems P&IDs, Line lists, Equipment data sheets and design pressure-temperature diagrams.

Senior Process (System) Engineer for Conoco-Phillips ULSD Strategic Revamp Hydro treating Project (Refinery, Detail Design)

Executed detail design; P&IDs, Line Designation tables for Diesel Hydro treating system including revamping of existing Sour Water Stripping System and Sulfur Recovery Unit.

Daewoo E&C, Seoul, Korea Jun. 1996 – Mar. 2001

Senior Process Engineer for Korea Gas Company Tongyoung LNG terminal Project (Natural Gas Processing, Detail Design)

Responsible for the detail design of LNG terminal facilities to retrieve the natural gas output

Led engineering team for the LNG terminal project.

Start-up Operation Support for Flue Gas De-sulfurization Project (200 MW Power Plant Start-up Operation)

Assisted Commissioning and Start-up Operation and ensured operators to know operation parameters and logics.

KEPCO E&C. Seoul, Korea Jun. 1991 – May. 1996

Senior Mechanical Engineer for Tangjin Thermal Power Plant Flue Gas De-sulfurization Project (Power Plant, Commissioning support)

Executed the Conceptual Design for flue gas desulfurization (FGD) system.

Participated in the technological and cost evaluation for the international bidders.

Prepared the ITB (Invitation to bid) with equipment specification preparation for flue gas de-sulfurization (FGD) system.

Provided Project Management Consultancy service for detail phase of project.

Supervised Commissioning and Start-up Operation.

Daewoo Engineering, Seoul, Korea Jun. 1987 – Jan. 1989 Process Engineer for Dongbu Chemical Co. Poly-styrene system (Petrochemical Units, Detail Design)

Detail design to develop P&IDs, Line Designation tables.

Process Engineer for Pohang Chemical CO., PA/MA system of Pohang 3rd Revamping Project (Petrochemical Units, Detail Design)

Designed heat exchangers using HTRI program.

Education

BS, Chemical Engineering, Korea University, Seoul, Korea

Natural Gas Processing Technology Session at U of C, Calgary 2004

HYSYS simulation program at Hyper-Tech. Co. Calgary 2001

Computer Skills

HYSYS and PRO II simulation program: Advanced

Flarenet Program: Basic

MS office program (Word, Excel and PowerPoint): Intermediate

Language

English: Fluent

Contact this candidate