computer litertae
Resume:
ROMMEL PATRICIO GONZAGA
Address : #*** ******, *******, ******
Contact Nos. : +63-949-***-****
E-mail address : **********@*****.***
CAREER SUMMARY :
** ***** ***** **********d in Electronics Company ( 2 years experienced in JAPAN as Japan Technical Intern Trainee and 2 years in Thailand as an OCWs).
Knowledge in Design of Experiments, FMEA, Statistical Analysis (JMP), 8D, Quality Control tools, Failure Analysis (SEM, EDX).
Presently managing/owning a small computer/internet café which handles repair, software installation and rental since 2008.
WORK EXPERIENCED :
TDK Philippines, Inc.: Manufacturer of magnetic heads, inductors, and camera module assemblies (CMA) including voice coil holders (VCH) and optical image stabilizers (OIS)
119 East Science Avenue, Laguna Technopark Inc., Biñan, Laguna
DATE : January 06, 2016 - October 05, 2020
PRODUCT /PROCESS ENGINEER - II
Coordinate with Taiwan counterpart and different department in TDK plant for new product for build up.
Checking and monitoring of actual implementation if complies with the requirements released thru appropriate documents
Coordinating to concerned groups for any issues that prevent from achieving targets
Preparing and submitting report such as data summary, conclusion and recommendations
Checking and recommending document revision relating to all manufacturing operation operations
Confirming if customer complaints are properly resolved and validates that corrective actions has yielded good and expected results
Knowing and understanding the overall process target and actual lead time
Ensuring implementation of improvement plans are carried out with acceptable or expected results
Working with Failure Analysis Team to fully understand failure mode and be able to draw long term corrective actions
Evaluating functionality of misprocessed materials to reduce scrap as much as possible
Conducting tester machine simplification for productivity improvement
Preparing new materials components for new product build up.
KYOCERA Circuit Solutions, Inc.: Multi-layer Printed Circuit Board Manufacturing Co.
Light Industry & Science Park of the Philippines-II : ISO-14001 & ISO-9001 Certified Company
Brgy. Lamesa, Calamba City 4027 Philippines
PROCESS ENGINEER III
(2 years Technical Intern Trainee in Japan) : September 25, 2012 - March 30, 2015
After becoming a regular employee (6 months working), sent to Japan as Technical Intern Trainee.
Investigating and analyzing the causes of customer claim
Making weekly and monthly Statistical Process Control data
Preparing and submitting report such as data summary, conclusion and recommendations
Measuring and doing cross-section of Printed Circuit Board to analyze layer construction, thickness & via hole size
Assisting and encouraging the development of objectives, strategies and plans aimed at achieving customer satisfaction and the efficient use of organizations' resources
Evaluating functionality of misprocessed materials to reduce scrap as much as possible
Checking and monitoring of actual implementation if complies with the requirements released thru appropriate documents
Coordinating to concerned groups for any issues that prevent from achieving targets
Checking and recommending document revision relating to all manufacturing operation operations
Confirming if customer complaints are properly resolved and validates that corrective actions has yielded good and expected results
Knowing and understanding the overall process target and actual lead time
FIRST PHILEC SOLAR CORP: Wafer Slicing Manufacturing Co. for Solar Panel
First Philippine Industrial Park, Brgy. Ulango, Tanauan City
Batangas 4232 Philippines
PROCESS ENGINEER/TECHNICAIN-II : September 02, 2009 - August 18, 2012
Responsible for Yield & Quality improvement and stable production operation.
Determining process approaches and parameters.
Initiating and driving process yield & capability improvements
Maintaining high quality documentation on all products, processes and procedures.
Establishing process controls for new products and key processes
Proposing, reviewing and evaluating processes
Analyzing and selecting components and equipment, as well as evaluating supplier capabilities
Designing and conducting independent experiments or tests
Defining problems and objectives, developing approach, analyzing results and providing recommendations
Directing and managing design implementation of required process changes and modifications
Planning, conducting and directing complex projects or major phases of significant projects
Checking and recommending document revision relating to all manufacturing operation operations
ASPOCOMP (Thailand) Co. Ltd : Multi-layer Printed Circuit Board Manufacturing Co.
684-685 Moo 11 Sukhapibal 8 Road : ISO-14001 Certified Company
Nongkham Sriracha Chonburi Thailand
PROCESS ENGINEER : October 30, 2006 - October 31, 2008
(Mechanical Drilling Process)
Responsible for quality improvement and stable production operation.
Checking production operators if following the standard procedure.
Checking all machines process parameters if operating within the stipulated control limits.
Evaluating new materials for process improvement or cost reduction.
Troubleshooting process problem
Investigating causes of production defects and work with QA and production personnel to reduce the defect level
Reporting all process material and equipment problems without any delay to Manager, including production mistake and violations of standard procedure.
Checking and recommending document revision relating to all manufacturing operation operations
Defining problems and objectives, developing approach, analyzing results and providing recommendations
Analyzing and selecting components and equipment, as well as evaluating supplier capabilities
Designing and conducting independent experiments or tests
Initiating and driving process yield & capability improvements
IBIDEN Philippines Inc. : Printed Circuit Board Manufacturing Co. which serves
First Philippine Industrial Park as housing for IC chips electrically connecting it with
Brgy. Sta. Anastacia, Sto. Tomas Printed wiring board.
Batangas, Philippines : ISO-14001 Certified Company
PROCESS ENGINEER : February 16, 2004 - October 17, 2006
(Laser Drilling Process)
Responsible for manufacturing process condition, implement new process, improve current process capability.
Studying and evaluating new methods, ways, materials to improve current process and manufacturing capability
Performing series of Design of Experiments to determine the optimum processing condition such as machine materials and new method
Conducting evaluation to determine the criteria, key process parameters and key product characteristics.
Reducing rejection and determining the root cause of customer complaint
Completing change requests on procedures making significant improvements to the manufacturing processes and the quality performance.
Working with QC, QA, Facility and Manufacturing to ensure all issues are successfully resolved
Reducing material usage and use cheaper type but with high quality
Checking and recommending document revision relating to all manufacturing operation operations
Defining problems and objectives, developing approach, analyzing results and providing recommendations
Analyzing and selecting components and equipment, as well as evaluating supplier capabilities
Designing and conducting independent experiments or tests
Initiating and driving process yield & capability improvements
SYNERTRONIX, INC. : Multi-layer Printed Circuit Board Manufacturing Co.
Batino, Calamba City, Laguna : ISO-9002 & QS-9000 Certified company
DATE : October 22, 1998 - August 15, 2003
PROCESS ENGINEER
(Mechanical Drilling/Routing (3 years)
Responsible for providing immediate technical support to production for it’s smooth and continues operation through line monitoring, evaluation and debug to produce good quality boards covering multiple areas of responsibilities.
Preparing debug and evaluation report for each new process, material, equipment, product and specification
Conducting line audit to ensure that production problems are anticipated, prevented and customers’ requirement are met and standard operating procedures/work instructions are properly implemented
Providing material controller with new material requirements and verify and update usage rates.
Creating routing program for HITACHI CNC Routing Machine NR-4E21E model
Drilling Printed Circuit Board using HITACHI CNC Drilling Machine with 5, 6 & 10 spindle machine
Measuring routed boards & drilled panels using 3D QVPak - 606 measuring machine to ensure board or panel quality requirements are met
Creating V-cut program at SVD-450A V-scoring machine
DEIONIZED AND
WASTE WATER ENGINEER (2 years)
Responsible for continues operation of Deionized-Waste Water Treatment plant and perform corrective & preventive maintenance of equipment used.
Plans and implements effective operation and maintenance schedules and activities to ensure trouble free operation of the system.
Ensure proper controls on handling, storage and use of supplies, tools, and parts.
Monitor production use of Deionized water & waste dispossal.
Continuosly find ways of maintaining and improving efficient operation of the system.
Supervises technicians in operation performing repair in the equipment use at Deionized / Waste water plant.
EDUCATION
March 1997 Adamson University
San Marcelino Street, Ermita Manila
Bachelor of Science in Electronics And Communications Engineering
March 1991 Saint John Academy
Calamba, Laguna
Academic Secondary Course
March 1987 Tiyani Elementary School
Primary and Intermediate Course
SPECIAL SKILLS
Basic Nihonggo Language (2YearsTechnical Intern Trainee in Japan)
Routing program for HITACHI CNC Routing Machine “NR-4E21E”.
Drilling operation of HITACHI CNC Drilling Machine “5, 6 & 10 spindle machine”
Laser Drilling operation of HITACHI LASER MACHINE “LC2C & LC4F”
Knowledge in computer systems - EXCEL, WORD, POWER POINT, JMP software
In depth knowledge in Design of Experiments, FMEA, Statistical Analysis (JMP), 8D, Quality Control tools, Failure Analysis (SEM, EDX).
Program & measurement operation on measuring machine (QuickVision, Nexiv, ViaCon)
TRAININGS / SEMINARS
March 2013 - march 2015 Japan Technical Intern Trainee
KYOCERA CIRCUIT SOLUTIONS, INC.- Japan
June 16, 2012 Kiban-kyohka (safety)
FIRST PHILEC SOLAR CORP
February 04, 2005 TPM Concept / 5’S Autonomous Maintenace Program
IBIDEN Philippines Inc.
May 11, 2002 Failure Mode and Effect Analysis
Synertronix, Inc., Batino, Calamba, Laguna
May 25, 2001 8 Discipline of Problem Solving
Synertronix, Inc., Batino, Calamba, Laguna
November 25, 2000 How to Review Documented Procedure
Synertronix, Inc., Batino, Calamba, Laguna
PERSONNAL DATA
Permanent/provincial address :#460 Masili, Calamba City, Laguna, Philippines
Date of Birth : March 4, 1974
Place of Birth : Calamba City, Laguna Philippines
Civil Status/ Nationality/ Religion: Married/ Filipino/ Catholic
Height / Weight : 5’ 5”/ 62kgs.
CHARACTER REFERENCES :
Rey Magsinu : TDK Philippines - Engineering Manager
Cellphone no.: 091*-******* / 096*-*******
Jonnie Bonsol : TDK Philippines - Senior Engineer
Cellphone no.: 090********
Maneil Olores : Amkor Technology Phils – Senior Customer Representative
Cellphone no.: 091********
Contact this candidate