Page * of **

CURRICULUM VITAE

SUMMARY

More than 26 years’ experience i.e. working after completion of Engineering degree since February 20, 1994 in Petroleum Refineries, Fertilizer Plants, Oil & Gas Exploration Fields, Consultancy Company in UK and in EPC Companies.

Skills:

Detail Design and Engineering of following as per ASME, BS, EN, Standards:

Pressure Vessels, Storage Tanks, Scrubbers, Modular Process Units

Low Pressure, Medium Pressure, High Pressure Steam Boilers

Heat Exchangers, Columns, Towers, De-aerators, Economizers

Oil and Gas Pipe Lines, Process Piping in Plant, Power Piping

Steel Structure etc.

Projects Management in Petroleum Refineries, Fertilizer Plants, Utility Industries etc. CAREER

1. Pak Arab Refinery Ltd. (PARCO)

PARCO, an integrated energy conglomerate is a joint venture between Government of Pakistan and Emirate of Abu Dhabi. PARCO owns and operate Pakistan’s largest and most modern refinery (120,000 BPSD), over 2000 kilometers cross-country network of pipelines and strategic storage facilities. The company has joint ventures with International companies e.g. TOTAL, OMV and is continually following aggressive growth strategy with planned expansions, acquisitions and penetration in to new markets. Job Duration: March 31, 2015 till today

Position: Chief Engineer – Engineering Services Department since October 22, 2020

Review design and coordinate for timely installation of Ø12” API 5L GR B pipeline 550 m long in order to transfer MOGAS from Refinery at WOTS-3 Station for Pakistan State Oil (PSO)

Review design and coordinate for timely installation of Ø16” API 5L GR B pipeline 1800 m long in order to transfer MOGAS from Refinery at WOTS-3 Station for Oil Marketing Companies (OMCS). Name : Tanveer Ahmad

Postal address : House # 174, Phase V, D.H.A. Lahore, Pakistan Mobile phone # 009***********

Email : adjvs8@r.postjobfree.com

Page 2 of 13

Monitor execution activities to ensure timely completion of major repair works in 6 storage tanks for asphalt at ABU Plant, Vacuum Gas Oil (VGO) Tank, Light Gasoline Oil (LGO) Sphere.

Coordinate for installation of 12 nos. classified IS (intrinsically safe) class security cameras at site of local crude decanting for storage in tanks for 24 hours operational monitoring.

Monitor execution of 2 nos. 3 story family accommodation buildings for Married Officers (MOA) in Refinery Housing.

Position: Chief Engineer – Refinery Projects since February 01, 2016 to October 21, 2020

Regularly visited installation sites of REVAMP Project and coordinated for safe execution by Contractors/Sub-Contractors, Vendor Service Men (VSM’s), Consultants for timely completion of REVAMP Project in order to enhance 20 capacity of Petroleum Refinery i.e. from 100,000 BPSD to 120,000 BPSD.

REVAMP Project has been successfully commissioned in October 2020. Performed Responsibilities are listed below;

Daily updated assigned Project Managers and discuss matters to be resolved.

Regularly visit sites of Turn Around #4 Project and monitor safe execution by Contractor, VSM’s, Consultants. Refinery Turn Around was successfully completed during February-March, 2020.

Coordinate with Materials Department (Local and Foreign Teams, Inventory Control Section), Plant Maintenance Department, Engineering Services Department, Technical Services Department and Inspection Department for timely solution of day to day issues to ensure on time availability of all materials required at Plant during Turn Around.

Received Management appreciation for contribution in Turn Around.

After Turn Around, coordinated with Materials Departments (Local and Foreign), Inventory Control Section, Plant Maintenance Department, Engineering Services Department, Technical Services Department and Inspection Team for solution of day to day technical issues. Regularly follow-up with concerned to ensure timely availability of materials at site for REVAMP Project and for rehabilitation of storage tanks for petroleum products, reactor columns etc. which are deemed important as a result of quarterly Inspections by QA-QC Department.

Co-ordinated with Finance Department, Maintenance Department, Engineering Services Department and Material Departments for timely closure of Goods Receipt Notes (GRN) and Services Received Invoices to ensure on time booking of costs for jobs executed during TA-04 and REVAMP Project.

Coordinated with relevant stake holders for reconciliation of all materials procured for REVAMP and Turn-Around Projects.

Developed scope of work for new projects e.g. 250,000 BPSD PARCO COASTAL REFINERY Project, 100 MW Solar Power Plant, Refurbishment of LPG Plant owned by Parco Pear Gas (PPGL). Page 3 of 13

Review work packages submitted by consultants, contractors & vendors including design specifications, drawings, contract documents etc.

Projects planning & scheduling. Obtain Management approvals for new projects.

Provide support to the Management through techno-commercial evaluations for various projects.

Attend meetings with European and American Companies regarding study for the installation of 250,000 BPSD new Refinery and for Revamp project of existing 100,000 BPSD Refinery.

Coordinate with TSC and HAZOP Teams. Issue monthly progress reports and other documents.

Organize Technical Trainings for Divisional Employees.

Coordinated with all Departments for feedback to identify gaps in Engineering Procurement, Construction and Commissioning phase to avoid surprises in timely completion of projects.

Progress monitoring of other projects and coordinate for their timely completion.

Coordinate for timely utilization of yearly approved Revenue and Capital Budgets.

Supervision of execution activities at sites e.g. horizontal directional drilling activities across canals and tie-ins for dia. 26” cross country MOGAS Pipeline Network, replacement of pipeline segments and coating works etc.

2. Project Based Assignments from October, 2012 – March 29, 2015 a. General Manager Technical and Projects in AMS Power & Industrial Engineering: Responsible to win new projects and their successful installation. Won four projects in few months and arranged their successful installation. All projects involved Civil, Mechanical, Piping, Electrical and Instrumentation works. One project was biggest (value wise) in company history. b. Senior Manager Technical and Design in Haseeb Waqas Group of Companies: Finalization of 100 MWe coal based Power Plant consisting of 4x125 TPH coal fired high pressure boilers and steam turbines for a sugar mill. Detail engineering and technical support during the manufacturing of bagasse fired high pressure water tube boilers, pressure vessels, heat exchangers, refinery/petrochemical distillation towers, storage tanks, dual media filters, sand filters, RO units, Demineralized Water/ soft water treatment plants, sewage treatment plants, overhead travelling cranes, belt conveyors, sorting conveyors, process piping and steel structure. Installed as per ASME, DN/EN and API Standards. c. Engineering Manager: 48,500 M3 LGO Tank and LCO Tank including piping works for Qatar Petroleum (Doha-Qatar).

d. Project Manager: Oryx GTL Shutdown works (Qatar). e. Project Management for the design, procurement and installation of 15 MMCFD Oil & Gas processing Plant for Polish Oil & Gas Company (POGC). It has been successfully commissioned in June, 2013. Plant consists of separators, de-hydration unit, compressors, U-stamped skid mounted Page 4 of 13

package units (three phase and two-phase condensate water separators, glycol drain package, slop oil vessel package, water degasser package), storage tanks, piping, API pumps, fire water network etc. f. Project Manager for the installation of 26 KM long Ø10” natural gas pipe line for ENGRO Fertilizer Plant. This project has been successfully installed and commissioned within three months. g. Design review of HVAC system including plumbing system for water supply and drainage of 13 story building. 3. FATIMA FERTILIZER LTD. (FFL)

Job Duration: August 02, 2010 to Oct. 10, 2012

Position: Unit Manager Projects

Lead Projects Engineering and Execution Teams, responsible to handle detail engineering and execution activities of projects within plant and outside plant battery limits.

Reviewed and approved more than 350 detail engineering packages for projects of Urea Plant, Ammonia Plant, Nitric Acid Plant, CAN Plant, O&U area.

Presentation of Projects Unit budget for management approval. Review and approval of material purchase requisitions, comparative statements, work orders.

Meet the execution timelines.

Day to day plant modifications for Urea Plant, Ammonia Plant, Nitric Acid Plant, CAN Plant, Ammonium Nitrate Plant, NP Plant, O&U Area.

All works were executed as per specifications of Kellogg, Kawasaki, CF Brown and UDHE

Arranged the installation of design soft-wares e.g. Auto-Pipe, STAAD Pro, Compress VI for Project Engineers. Obtained Management approvals for technical trainings of Projects Department personnel. Organized the availability of latest design standards (ASME, API etc.) for the team. Projects handled in Fatima Fertilizer Limited:

S. # Project Title

01 Design and Installation of De-humidification System for CAN Plant including 2x Ø12” – 1.8KM long chilled water pipe lines. Project increased CAN production capacity @50 tons per day. 02 Design and installation of Natural Gas compression facility consisting of two Compressors (Cooper Cameron – USA) and Ø 20” piping works, Civil and E&I works 03 Design and installation of five new wells along with Ø12”–4.5 KM long piping for Potable Water of Plant. 04 Design and Installation of 2x75m3/hr. Reverse Osmosis Plant for O&U Area. 05 Installation of Ø48” piping along with 2x5000m3/hr. cooling water booster pumps for CAN and NP Plant 06 Design and installation of Ø4” – 3.4KM long Natural Gas Line from NG Station to the Township of Plant. 07 Laying of 0.3mm thk. HDPE-GEO Membrane in Evaporation Ponds at an Area of 220,000 M2. Completion of civil works for Evaporation Pond # 1, 2, 3 &4. Design and Installation of Ø10”- 950 m long HDPE underground piping at a depth of 10 feet for Evaporation Pond # 1, 2, 3 &4. 08 Design and installation of Ø12” – 1.2KM long Natural Gas Line from NG Station to Ammonia Plant Page 5 of 13

09 Design of utility lines (IA, PA, LLPS, CW and DW lines) for Plant Handling and Bagging Area 10 Design and installation of Hot Air Blowing System at Urea and CAN Plant bagging area. 11 Completion of Waste Water Piping System for whole Fertilizer Complex. 12 Completion of Chemical Sewage Piping System for whole Fertilizer Complex 13 Design and Installation of Nitric Acid Jerry Cans Filling Facility 14 Design and installation of Instrument Air (IA) Line for Plant Maintenance Shop 15 Design and Installation of Potable Water Line to Plant Canteen 16 Modifications in conveying and bagging systems from Urea Prilling Tower to bagging systems 17 Design and Installation of Gaseous Ammonia System with Piping at CAN Plant 18 Design of urea dissolving system in the urea solution tank 19 Design and installation of Oily Water System at Plant 20 Design and Installation of mechanical piping works for Sedimentation Basin. FRP lining inside the Sedimentation Basin.

21 Design and Installation of Lime Stone Storage Shed, Protection Sheds for RO Plant, Nitrogen Plant etc. 4. MOUCHEL – UK (Hinckley Office)

A leading Engineering and Consulting Company of UK, established in 1897. Provide detail engineering and Project Support services within UK, Middle East and for other countries, Work Location: Hinckley (Leicestershire)

Department: Energy and Carbon Projects

Duration: 20 November 2008 – 26 February 2010

Position: Senior Mechanical Engineer

Responsibilities included the production of conceptual and detail design packages, design calculations for piping, vessels, tanks, scrubbers, heat exchangers, boilers etc. using IGE/TD Standards, ASME/ANSI/ASTM Standards, BS-EN Standards and API Standards, review & approval of drawings prepared in house, review and approval of contractors design packages, technical bid evaluations, preparation of procurement data sheets/specifications and technical proposals, undertake site visits, attend technical clarification meetings with clients and contractors. Acted as a mentor for Junior Mechanical Engineers.

Projects handled in UK:

S. # Project Title Client

01 New LNG Facilities: Review of vendor design packages for LNG Vessels, control valves, safety valves, plug valves etc. Kuwait National Petroleum Co.

(KNPC)

Page 6 of 13

02 New LPG Facilities: Responsible to review tender documents/ project specs., vendor design packages for vessels, piping, valves etc.

Kuwait Oil Tanker Company

(KOTC)

03 Design of Pressure Reduction Installation (PRI) 92.64 -70 barg 50 km long Gas line (Design Calcs., Data Sheets, Design Report).

National Grid (UK)

04 Technical Analysis of 42 KM Long; Ø600 High Pressure Gas Pipeline between Silk Willoughby and Stay Thorpe Power Station

National Grid (UK)

05 Design package for installation of Rotary Separators at Carnforth Compressor Station

National Grid (UK)

06 Best Available Technique Study to Replace Existing Water Bath Heaters at Carnforth and Warrington Compressor Stations

National Grid (UK)

07 Best Available Technique Study to Install LNG Facilities at Manchester

National Grid (UK)

5. Saudi Basic Industries Corporation (SABIC)

SABIC is a global leader headquartered in Riyadh (Saudi Arabia). Manufacture different kind of products for example: chemicals, metals, fertilizers etc. on a global scale in the Americas, Europe, Middle East and Asia Pacific,

Work Location: Jubail Industrial City- Saudi Arabia Department: Centralized Design Management Department of SABIC Position: Sr. Mechanical Design Engineer

Duration: 09 February, 2006 – 18 October, 2008

Design Review of a Mega Project in United States of America in 2006 Saudi Arabian Petrochemical Company (PETROKEMYA), an affiliate of SABIC awarded US$ 260 Million Project to an EPC Company named as MUSTANG TAMPA Inc. located in TAMPA – FLORIDA

(USA). Responsibilities as a Stationary Equipment & Piping Specialist during stay in USA included the meetings with equipment manufacturers to freeze technical issues as per project specifications, review and comment on vendor design documents, review and comment on Technical Bid Analysis

(TBA) prepared by MUSTANG TAMPA. These activities were performed for following equipment’s of Mega Project:

2 x 150 TPH; 110 Bar G; 520ºC VHP Steam, Water Tube Boilers

1 x 400 M3 De-aerator; 01 No. Ethylene Vaporizer; Air Coolers & Air Dryers

Water Treatment Plant for whole Project

02 Nos. High Pressure Instrument Air Buffer Vessels

4 Nos. Storage Tanks each in diameter 28000 mm

Page 7 of 13

HAZOP Study in Poland during June-July, 2007

Al-Jubail Fertilizer Company (ALBAYRONI); an affiliate of SABIC awarded 400 Million Saudi Riyal Urea Prilling Tower Emission Control Mega Project to an EPC Company named as PROZAP Engineering Ltd. located in Pulaway (Poland). As a Lead Mechanical Design Engineer for this project, attended HAZOP Study meetings held in Poland. HAZOP study included crystallization unit, cleaning unit, scrubbers, vessels, tanks, pumps, fans, silencers, piping, ducting, stacks and steel structure. Mechanical Design Review in Poland in Nov.- Dec., 2007 Review of mechanical & piping design documents prepared by PROZAP for Urea Prilling Tower Emission Control Project during stay in Poland. Reviewed detail engineering documents for tanks & vessels, piping plans, piping isometrics, pumps & fans specifications, drawings for ducting, steel structure and prilling tower exhaust doors.

Major Responsibilities in SABIC:

- Preparation of Front End Engineering Packages for projects of Petrochemical Plants and Steel Plant.

- Review of design packages submitted by EPC Contractors

- Preparation of Technical Requisitions for procurement of project materials.

- Bid technical evaluations for boilers, FRP/SS/CS Tanks, vessels, de-aerators, coolers, heat exchangers, hydrogen generators, water cooled chillers, air cooled chillers, centrifugal pumps, diaphragm pumps, fans etc. during procurement process.

- Design calculations for vessels, tanks, scrubbers, heat exchangers, boilers and piping using ASME/ANSI, BS-EN and API Codes/Standards

- Material selection for vessels, tanks, scrubbers, heat exchangers, piping and ducting at different working conditions.

- For in house projects, drawings review and approval for vessels, tanks, heat exchangers, scrubbers, piping, ducting and steel structure, projects costing and scheduling Projects handled in SABIC:

For each project, a team of civil, electrical and instrumentation engineers was assigned to support. All of these assigned Engineers were having more than 20 years’ experience in their relevant discipline. S. No. Project Title Plant Name

01 Installation of Ethane Heat Exchanger with Piping Jubail United Petrochemical Company 02 Installation of HCl Scrubbing System with Piping Jubail United Petrochemical Company 03 Installation of 100 M3 HCl Tank with Piping Saudi Arabian Petrochemical Company 04 Installation of Nitrogen Seal Gas Buffer Vessel & Piping National Industrial Gases Company Page 8 of 13

05 Reformer Nox Emission Control Unit with Piping Al-Jubail Fertilizer Company 06 Urea Granular Emission Control Unit with Piping Saudi Arabian Fertilizer Company 07 Melamine Recovery Vessels,, Tank and Piping Saudi Arabian Fertilizer Company 08 Installation of Gas Seal Pot with Piping Saudi Arabian Petrochemical Company 09 600 RT Water Cooled Chiller with Piping Saudi Iron & Steel Company (HADEED) 10 3x170RT Air Cooled Chillers with Piping HADEED

11 Installation of 4 Horizontal & 3 Vertical Ladle HADEED Pre-Heaters along with Dryers

12 Installation of Air Compressor with Piping HADEED 13 Installation of Hydrogen Plant with Piping HADEED 14 Installation of Air Dilution System with Piping HADEED 15 Inst. of Furnace De-dusting at DR Module A&B HADEED 16 Installation of DRI Vibro Feeder with hopper HADEED 17 Installation of Pinch Roller at Rolling Mill HADEED 18 Installation of Cooling Water System at SP—LP HADEED 19 Oxide De-dusting at Direct Reduction Plant HADEED 20 Installation of New Oxygen Line at Steel Plant HADEED 21 Installation of I Ton Jib Crane at FP Shop HADEED 22 Installation of Pre-Heating Furnace at FP Shop HADEED 23 Installation of 04 Nos. Centralized Lubrication Systems

HADEED

24 Installation of 04 Air Compressors at DR Plant HADEED 25 Installation of Lathe Machine at Fitting Shop HADEED 26 Installation of 20 M3 HCl Tank & Piping at EDP HADEED 27 Installation of Strand Cutting Machine at LP Shop HADEED 28 Modification of Run Out Roller Table HADEED

29 Installation of Sample Carrier Line in LF # 1&2 HADEED 30 Oil Circulation System for Motor Testing HADEED 31 Up-Grading of Product De-dusting System at DR Mod. C HADEED 32 Installation of Roll Shop Logo Branding Machine HADEED 33 Installation of Six Exhaust Fans in SPLP HADEED Page 9 of 13

34 Up-gradation of CCP Cooling System HADEED

35 Up-gradation of Rolling Mill Open Circuit System HADEED 36 Replacement of Caster Cooling Pipe Lines HADEED 37 Installation of Robot Table at Bar Rod Mill Roll Shop

HADEED

38 Installation of Testing Machines at New Test

House

HADEED

39 Up-gradation of Grease Sys. at Rolling Mill

Complex

HADEED

40 DR Mod A & B Fire Fighting Pumps Replacement HADEED 41 Irrigation Piping System HADEED

42 Upgrade Guides for Different Stands at Steel Plant HADEED 43 Add Screw Counter in Stacker Area of Bar Mill 2 HADEED 6. Descon Engineering Limited (Multinational EPC Company) Work Location: Lahore - Pakistan

Duration : 20 February 1994 – 08 February 2006

Last Position: Lead Engineer Mechanical Design/Deputy Manager Engineering Manager:

a- Engineering Manager for 2x80 TPH @ 29 BarG, 350+10ºC Bagasse Fired Water Tube Boilers supplied to JDW Sugar Mills (Pakistan). Contract Value Pak. Rs. 130 Millions. b- Engineering Manager for 2x80 TPH @75 BarG, 520+10ºC Bagasse Fired Water Tube Boilers supplied to Almoiz Industries Ltd. (Pakistan). Contract Value Pak. Rs. 350 Millions. c- Engineering Manager for 30TPH @14BarG, 220ºC Water Tube Boiler supplied to Vimpex (Syria) Responsibilities included the following:

Performed pressure parts design calculations for below listed projects, drawings checking, got approval of pressure parts design packages including design calculations and drawings from recognized third parties i.e. Lloyds (UK), TUV (Germany), HSB (USA), SGS (UK), Bureau Veritas

(France) etc.

Sr. # Project Title Client

01 2x30 TPH Water Tube Boilers National Floor Mills - UAE 02 LPG Bowzers Mass Jordan Company - Jordan

03 CO2 Bowzers Iraqi Company

Page 10 of 13

04 25 TPH, 17.93 BarG Water Tube Boiler Assuit Refinery (ASORC) - Jordan 05 80 TPH, 350+10ºC, 29 BarG Bagasse Fired

Water Tube Boiler (Design Year 1998-1999)

Jamal Din Wali Sugar Mills – Pakistan

( JDW 1)

06 80 TPH, 350+10ºC, 29 BarG Bagasse Fired

Water Tube Boiler (Design Year 1999-2000)

Kohinoor Sugar Mills Limited

07 60 TPH, 360+10ºC, 26 BarG Bagasse Fired

Water Tube Boiler (Design Year 1999-2000)

Noon Sugar Mills Limited

08 2x80 TPH, 350+10ºC, 29 BarG Bagasse

Fired Water Tube Boilers (2003-2004)

Jamal Din Wali Sugar Mills - (JDW 2)

09 2x80 TPH, 75 BarG, 520+10ºC Bagasse

Fired Water Tube Boilers (2005-2006)

ALMOIZ Industries -

10 80 TPH, 460 + 10 ºC, 760 PSIG Water Tube Boiler National Refinery 11 3x41 TPH, 17.5 BarG Water Tube Boiler CPC Rafhan Maize Limited 12 10 TPH, 32 BarG Water Tube Boiler ICI Pakistan Limited 13 22 TPH, 25 BarG Water Tube Boiler General Tyres Limited 14 05 TPH, 30 BarG Water Tube Boiler Tri-Pack Films Limited 15 15 TPH, 12.5 BarG Fire Tube Boiler Nishat Textile Mills 16 15 TPH, 12.5 BarG Fire Tube Boiler Afroze Textile Mills 17 15 TPH, 12.5 BarG Fire Tube Boiler US Apparel Textile Mills 18 15 TPH, 20.68 BarG Fire Tube Boiler United Industries Limited 19 15 TPH, 20.68 BarG Fire Tube Boiler Zulfiqar Industries Limited 20 2x15 TPH, 14 BarG Fire Tube Boilers Nakshbandi Ind. Limited 21 05 TPH, 12 BarG Fire Tube Boiler Merk Sharp & Dome Pvt. Ltd. 22 02 TPH, 12 BarG Fire Tube Boiler Leather Connection 23 05 TPH, 19 BarG Fire Tube Boiler Gamalux.

24 04 TPH, 17.23 BarG Fire Tube Boiler Packages Limited 25 08 TPH, 10 BarG Fire Tube Boiler Saleem Brothers Mills Limited 26 3.6 TPH, 17.23 BarG Fire Tube Boiler Roshan Packages Limited 27 08 TPH, 12 BarG Fire Tube Boiler Afroze Textile Mills 28 05 TPH, 12 BarG Fire Tube Boiler Coca Cola Industries 29 2x08 TPH, 8 BarG Fire Tube Boiler Dewan Farooque Motors Ltd. 30 05 TPH, 12 BarG Fire Tube Boiler Faisal Spinning Mills Limited Page 11 of 13

31 05 TPH, 15.5 BarG Fire Tube Boiler Fauji Cereals 32 04 TPH, 17.23 BarG Fire Tube Boiler Mahr Garments Limited 33 05 TPH, 12 BarG Fire Tube Boiler Otsuka Industries Limited 34 08 TPH, 12 BarG Fire Tube Boiler Quetta Textile Mills Limited 35 2x04 TPH, 12 BarG Fire Tube Boilers Rawalpindi Medical College 36 04 TPH, 12.5 BarG Fire Tube Boiler Wartsila Diesel – Pakistan 37 15 TPH, 20.68 BarG Fire Tube Boiler Colgate Industries Limited 38 20 TPH, 12 BarG Waste Heat Recovery

Fire Tube Boiler

Master Textile Mills Limited

39 3x1.48 TPH, 19 BarG Duplex Type Waste

Heat Recovery Fire Tube Boiler

ICI Pakistan Limited

40 0.748 TPH, 19 BarG Simplex Type Waste

Heat Recovery Fire Tube Boiler

ICI Pakistan Limited

41 400,000 IGPD, 03 BarG Water Heater Liberty Mills Limited 42 Salt Heater Sitara Textile Mills Limited

43 CO2 Bowzers & Storage Tanks Khair Enterprises Ltd. 44 LPG Bowzers and Tanks Ranja Enterprises

45 CO2 Bowzer Packgas Limited

46 LPG Bowzer Caltex Limited

47 LPG Bowzer SHV Energy Limited

48 Knockout Drum British Petroleum

49 Nitrogen Vessel OMV Limited

50 Filter Vessels National Refinery Limited

51 Water Softening Plants Nishat Textile, Style Textile, Liberty Mills, Mustaqeem Dyeing etc.

52 De-aerators National Floor Mills, General Tyre, Engro Asahi Polymer etc. 53 HCl Tank Sitara Chemical Limited

54 LPG Tanks Pakistan Oilfields Limited

55 Heat Exchanger Dyno Mills Limited

56 Heat Exchanger Engro Chemicals Limited

Other Responsibilities:

Piping Plans & Piping Isometrics checking for above Projects Page 12 of 13

Vendor quotation verification, material specification preparation, issued O&M Manuals for above Projects.

Material estimation from drawings and project technical proposal preparation at bid stage.

Non-pressure parts mechanical design calculations

Suitable material selection for pressure & non-pressure parts using ASME, DIN & BS Standards

Manufacturer Data Certificates preparation

Sales & Marketing Engineer (1997 - 1998)

Sales and marketing, material costing, technical and commercial proposal preparation for following:

Water Demineralization, Filtration and Softening Plants

Boilers (Fire Tube, Water Tube, Bagasse Fired, HRSG’s, Water Heaters etc.)

Power Plants (1-20 MWe), Overhead Travelling Cranes, Belt Conveyors, Pan Conveyors etc. Construction Manager (1996 - 1997)

Client: American Electric Supply Corporation (AES - USA) Plant Capacity: 2 x 365 MWe Power Plant

(i) Supervision of Steel Structure, Equipment & Piping Erection, road work, tanks concrete work, building work, cable laying, panels and motors erection

(ii) Training of client personnel on the operation of system. Commissioning & handing over of the project Projects Co-ordinator (1995 – 1996)

Cement Plant Capacities: 3000 Tons/Day & 5500 Tons/Day Client: Fauji Cement & Lucky Cement Corporations.

(i) Material take-off from the drawings and indenting

(ii) Material sourcing and comparative statements Preparation

(iii) Co-ordination with production shop and fabrication planning Design & Estimation Engineer (1994 – 1995)

Designing, material estimation and drawings checking for overhead traveling cranes, belt conveyors, apron feeders etc. Codes & Standards Knowledge

ASME Section I ASME B31.4 TRD (Technical Rules for Boiler Design) ASME Section VIII Division I ASME B31.8 AD Merk Blatter ASME Section VIII Division II API 620 EN Standards PD5500, BS 2790 API 650 Pakistan Boiler Code

ASME B31.1, ASME B31.3 ASME Section II Part A & Part D TEMA Computer Knowledge

Micro Soft Word, Excel, Power Point etc. Heat Exchanger Design Software’s Pressure Vessel Design Software’s (PV Elite & Compress VI) MS Project, Auto Cad and Auto view Review and approval of Project Schedules in Primavera (P 6) Piping Design Software (AUTO Pipe) Page 13 of 13

Trainings

CDM Regulations in MOUCHEL (UK) Objectives and Goals Setting in FFL (PAK) Hazard Analysis and Risk Assessment in MOUCHEL (UK) ASME Sec. VIII Div. I and Div. II in DESCON (PAK) Emotional Intelligence in FFL (PAK) PTW in Oryx GTL (QATAR) Leadership, Care and Growth in FFL (PAK) JHA and Working at Height in Oryx GTL (QATAR) Unleash the Power Within (PARCO - PAK) Fire Fighting, first aid (QATAR and PAK) ACADEMIC RECORD

Sr.

No.

Degree/Certificate Year of

Passing

Grade %age Achieved

1 M.Sc. Mech. Engg. (Production Group) 1994 - 1996 18 Months Post Graduate Diploma Main Subjects: Production Engg, Planning & Control, Human Resource Management 2 B.Sc. Hons. Mech. Engg. (3rd Position in University) 1989 - 1993 A 78.04% Main Subjects: Machine Design, Mechanical Engg. & Drawings, Industrial Materials, Power Plant, Heat Transfer, Thermodynamics, Quality Control, Hydraulics, Internal Combustion Engines, Refrigeration and Air-Conditioning, Engg. Mechanics, Applied Electricity, Strength of Materials, Numerical Analysis, Applied Mathematics.

3 F.Sc. (Pre-Engg.) (1st Position in College) 1986 - 1988 A 75.27% Main Subjects: English, Mathematics, Physics, Chemistry 4 SSC (1st. Position in School) 1984 - 1986 A+ 84.11% Main Subjects: English, Mathematics, Physics, Chemistry, Biology

Contact this candidate