RESUME

Parrivallal Munivel

Senior Piping Engineer

Email: adjv7q@r.postjobfree.com

Mobile No : +91-988*******

Career Summary

I am a Senior Piping Engineer with 24 Years of in core experience in Global Oil & Gas upstream (Offshore, Onshore & FPSO) and Downstream Projects executed in Mexico, UAE, Qatar, Oman, Brunei, Indonesia & India especially in site offices of state owned Oil & Gas Companies in Middle east & Asia Pacific.

Design Experience : In core Experience in Preparation of Plot plan, Equipment Layout, Piping Layout, Isometrics, Fabrication Drawings, P&ID, Pipe Rack Layouts, Installation & Removal Layouts, Bulk & Interim MTO, Nozzle Orientation, Clash checking, Preliminary support marking, Support detailing, As-built work, Site Survey, Valve schedule, Spool gen, Vendor document Review, Procurement for piping components, supervision of Engineers, Designers & Draughtsman, Expert in red mark up work & Stack up drawings

Project Experience : Offshore project (Greenfield, Brownfield, FPSO) & Onshore projects Refineries, Petrochemical, Chemical Plant, Water Treatment Plant, Power Plant, LNG Plant & Fertilizer Plant, MEP etc.,

My Key experience as Sr. Piping Engineer is as follows,

Detailed knowledge of Piping Design & optimized plant layouts & Coordinate in preparation of Plot plan, Equipment Layout, Piping Layout, Isometrics, MTO, Piping datasheets, and its related documents.

IDC Checking from Various Discipline

Allot Piping activities to designers & draughtsman supervise, check and monitor discipline piping activities on day-to-day basis to facilitate overall project delivery within budget and schedule.

Review Clash report status and follow-up clash resolution.

Checking of Pipe support and ensuring compliance with stress reports.

Identify, Organize and conduct Site Survey, prepare Red Markup Sketches, As-built work.

Technical Bid Evaluation, Cost Estimation done for Piping components.

Preparation of Installation and Removal layout for Revamp work projects

Coordinate and Review piping material take offs(MTO) activities and provide necessary details for further procurement activities.

TBE & Vendor drawing review for all piping items as well as special items.

Coordination with the site engineers for assisting Construction & Installation.

Checking of HVAC, Drainage, Plumbing & fire fighting drawings.

Well versed with international codes and standards like ASME, API, ASTM, Shell, Aramco, BSP, Qapco, QP, TOYO & TOTAL. Hold a valid H2S Clearance Safety Card.

Experiences :

Sr.Piping Engineer - McDermott - (From Feb 2019 to Dec 2020)

*Project Involved : BPTT Cassia Compression Project. Cassia-B,

TYRA-1 East Platform G, GCGV Project, Marjan-4

Checking & Review of Offshore Hook-up Drawings for Bridge connection, Flare line & Jacket Walkway.

Checking & Review of Standard & Special supports.

Checking & Review of Critical, Non Critical Supports & Special Supports.

Review Stress reports along with Supports load.

Preparation of Support modification Sketch to MDS Designers.

Review & Approval of GRE Vendor drawings.

Site survey on daily basis in Mexico & supporting to Yard related queries.

Checking and Approval of CPVC Piping drawings.

Checking, Review & Approval of Fabrication Drawings.

Technical guidance to Engineers & Designers and guide them with technical project recommendations.

Check & ensure support type and final MTO for Fabrication drawings.

Coordination with Design & Support Team .

Expert in Preparation of Red Mark up Sketches in Blue Beam.

Conversion of Design Drawings to Fabrication drawings using Spooler.

Good Hands on experience of Piping Stress report Checking.

Leading a team of Engineers & Designers of Spooler Team.

Expert in using PDMS, MDS, SPR, AUTOCAD, & Good working knowledge in S3D,

Sr. Piping Engineer - PUSB Engineering Ltd - Chennai

(From Jan 2018 to February 2019)

*Projects Involved : IGT -2 Brunei Shell Petroleum, HPCL - FRAPS, DIU, SG-10, . SG-11,SG-12, FFA & PRIME -G.

Preparation of P & ID Red Markup.

Clash Checking and resolved the problem

Preparation of Equipment & Piping model from Cyclone image,

Isometric Extraction & Checking work

Estimation for Proposals projects

Coordination with Cyclone team for input Retrieval.

Technical guidance and supervision of Designers & Engineering Trainees

Sr. Piping Engineer & Project Coordinator

Qatar Petroleum - Qatar

(from Nov-2016 to Nov-2017) - Qatar

*Projects Involved : QP - PCR As Built Project worked in following areas

FCC, SULPHUR, CONDENSATE, UTILITIES & TANK FORM.

Preparation of site survey report

Preparation of Red Mark Up Drawings for Piping, Civil & Structural.

Preparation of Piping Material Specifications, Technical specifications, Data sheets, Scope of work, Design basis etc.,

Review QA/QC Works for all Drawings & Documents.

Preparation of PFD, P&ID, Layout, Isometrics & MTO.

Provide Technical Direction and support of Piping Engineers & Designers.

Sr. Piping Consultant - Petroleum Development Oman

(From July 2016 - Aug 2016)

Deputed thro M/s Rock International-Oman

* Projects Involved: As Built project work for Petroleum Development Oman (PDO). Preparation of PFD, P&ID, Layout, Isometrics & MTO.

Piping Engineer- QAPCO (Qatar Petrochemical Company)

(From May-2015 to Dec-2015)

*Projects Involved : Internal Revamp project work for Existing Ethylene, Utilities, QVC, LDPE-1, LDPE-2, LDPE-3 & LLDPE Plants.

Onshore site visit, Site Survey and Site Study report for existing, modification and proposed system on daily basis.

IDC checking from various Discipline.

Preparation of Approval files work for each modification.

Responsible for Design and Modelling of Piping Layout, Isometrics & Bulk MTO

Piping material selection / specification / valve data sheets.

Review the vendor drawing and Technical evaluation for different type of valves, Piping fittings, flanges, fastener, gasket & special items etc.,

Checking piping layout & Isometric drawings as per latest P & ID.

Clash checking, Man hour Estimate, Bulk MTO,Pipe support selection.

Preparation of Requisitions, Technical Bid Evaluations(TBE), Supplier Document Review for all piping items.

Reporting to both Piping Head of Department & Piping Lead specialist.

Piping Engineer - KENTZ Engineers & Constructors (Qatar)

(Sep - 2014 to Mar - 2015)

Projects Involved : Pearl GTL GRVE Improvement project (Qatar)

Piping mark-ups on P & ID's.

Checking piping layout with respect to P & ID's.

Preparation of Piping Model, Iso Extraction work using PDMS, GAD Extracted from PDMS, Bulk & interim MTO extracted from PDMS,

Vendor drawing review & participate in clarification meeting.

Preparation of Clash Check for All Segments and Pipe supports.

Multi discipline support.

Preparation of Layout drawings for Installation and Removal lines.

Principal Piping Designer - PT. KBR Jakarta, Indonesia

(Mar - 2014 to June - 2014) (Short term Contract)

Projects Involved : Shah Deniz Stage – 2 Project (Offshore) PR- Platform & QU – Platform.

Preparation of detailing for all Utility Station in Cellar deck & weather deck.

Preparation of MDS Supports Modeling using PDMS.

Preparation of Clash Snaps for all decks, Model updation based on Stress comment.

Preparation of MTO and Multidisciplinary Co-ordination.

Preparation of PDMS Piping & Equipment Model & isometric Extraction and Checking work.

Piping Engineer - PT. Inti Karya Persada Tehnik, Jakarta, Indonesia

(May 2012 to Oct 2013)

Projects Involved : KALTIM – 5 PROJECT, 2500 MTPD AMMONIA & 3500 MTPD UREA PLANT

Model Review Based on P & ID.

Preparation of Isometrics Checking work, Preparation of Interim MTO.

Co-ordinating with other Disciplines.

Preparation of Options sketches for Critical and Non Critical lines.

Vendor drawing review & participate in clarification meeting.

To Support Technical Guidance for Designers.

Preparation of PDMS Piping Model & 2D work in AutoCad.

Piping Engineer - Petrokon Utama Sendirian Berhad PUSB (Brunei)

(Jul 2011 to Mar 2012) (Short term contract)

Responsible for complete Piping detail design using 3D PDMS / AutoCAD,

Preparation of all relevant piping deliverables and Stackup drawings for FADP04, FAGP04 Green field, 4 legged offshore well head platform (West facility) for Brunei Shell Petroleum. Preparation of Piping model for revamp work using 3D PDMS/AutoCAD and all relevant piping drawings and documents for CPDP01, CPPP01 & CPDP - 12, preparation of Well head Stackup Drawings and Installation and Removal layouts etc (East facility) for Brunei Shell Petroleum.

Site visits for piping tie - in identification and construction assistance for Total plant in Brunei. Site visits for piping tie - in identification and construction assistance for BLNG plant in Brunei.

Piping Consultant – Technip India Ltd., Chennai, India.

(Feb 2011 to July 2011) (Short Term Contract)

Projects Involved : Algeria Refinery (Algeria), Stockman (FPSO Project), NAMA Chemicals, (Epoxy 120 K expansion) KSA.

Preparation of piping layout, isometrics and MTO for Algerian Petroleum refinery.

Preparation of piping layout, Preliminary Bulk material take - off & Isometric preparation involved in vendor drawing review and updating in the model periodically.

Preparation of model Updation in layouts by Microstation.

Piping Engineer - Exterran Energy Solution (I) Pvt.Ltd.

(July 2010 to Feb 2011) (Short Term Contract)

Projects Involved : ALIBEKMOLA (Kazakhstan), KOZHASAI (Kazakhstan) JKX (Russia)

Preparation of Equipments & Piping modeling using PDMS, Preparation of Equipment Layouts, Safety and Escape layouts, Piping layouts, Extraction of Isometrics, Logical Pipe support, Pipe support details drawings, Interim MTO take off, Inter discipline coordination, Preparation of Cut out and Sleeve drawings and Preparation of Civil Shed Modeling for entire plant.

Piping Designer - Saipem India Projects Ltd., Chennai.

(Aug 2006 to June 2010)

Projects Involved : Arzew Utilities & Tanks – Algeria, KOC – Installation of Compressor GC-7,8 & 21 – Kuwait, BS-160 (Booster Station 160) – Kuwait, Petrochemical Project for Jane Hassad - Saudi Arabia, Effluent Treatment Plant – Pearl GTL – Qatar, LNG Tank – Fluxys LNG – Texas, LNG receiving storage and Regasification terminal – Texas, Chemical plant for Reliance Industries - Gujarat, India.

Used PDMS extensively for Equipment & Piping modeling, preparation of Plot plan, equipment layouts, safety and escape layouts, piping layouts, HVAC Layouts, Extraction of Isometrics, pipe support layouts, pipe support details drawings, Interim MTO take off, for the above projects

Plumbing Designer - Voltas International Ltd., (Dubai)

(May 2004 to Aug 2006)

Projects Involved : Dubai Wafi Hotel Project Khanmurjan Extension Project Burj Kalifa (Tender works), Jumeirah Beach Residence (JBR) Project.

Preparation of Pump House drawings, Preparation of Boiler room drawings Preparation of optional sketch for economical routing, Preparation of Chilled water lines modification, Preparation of Domestic water, drainage water, fire fighting lines & Bill of Materials, On-site Visiting and Other Service Co-ordination.

Mechanical Designer – B.K. Gulf LLC. (Dubai)

(Apr 2002 to Apr 2004)

Projects Involved : Dubai World Trade Centre Dubai Marina Project, Ducab As-Built work.

Preparation of Chilled water lines layout, Fire Fighting Drawings, Water Services & Drainage, HVAC Drawings, Preparation of Bill of Material and Pump room drawings & Coordinating with other services at site, expertised in Duct Shaft Drawings.

Earlier Careers:

TCS – GEDC (Deputed from Mech-Ci Cadd consultancy)

(May 1999 to Apr 2002) GE-Noupigas a Piping CADD Draughtsman

DEUTSCHE BABCOCK – BDWT (Deputed from Zoom – D)

(Aug 1998 to Dec 1998) Haldia project worked as a Piping Draughtsman

Tamilnadu Petro Products Ltd. (Deputed from Zoom – D)

(Oct 1997 to Jan 1998) as a Piping Draughtsman

Bharat Heavy Electricals Limited, BHEL (Piping Centre) Chennai, India

(Jan 1996 to Dec 1996) as a Technician Apprentice (Piping CAD Draughtsman)

Mech-Ci-Cadd Consultancy, Chennai, India

(May 1993 to Dec 1995) as a Cad Draughtsman (Piping)

Education

B.E., Bachelor of Mechanical Engineering, Anna University, Chennai, India.

D.M.E., Diploma in Mechanical Engineering, Central Polytechnic, Chennai, India.

Software Exposure:

Plant 3D Modeling Software : PDMS, MDS, S3D, Unigraphics, Iso Gen etc.,

Review Software : Navis works Freedom, Review Reality & SPR

2D Softwares : AutoCAD (All version), Microstation.

Other software : Bluebeam, MS-Office

Countries Worked: Mexico, United Arab Emirates, Qatar, Oman, Brunei, Indonesia & India.

Personal details

Name : M. PARRIVALLAL

Date of Birth : 18/11/1973

Nationality : Indian

Passport Number : M8147793

Date of Expiry : 09.04.2025

Skype Id : m.parrivallal

Contact this candidate