Alfred Mercado

***** ***** ******** **.

Richmond TX, 77406

713-***-****

adjqac@r.postjobfree.com

Summary:

Piping designer experienced in layout, equipment, complex skid, instruments location & position, 3D model review for client, 3D scan integration with model review, Isometric for construction, Interpretation of P&ID’s, MFD’s and Field walk-downs. Inter-discipline coordination, MTO, BOM for 30%, 60%, 90%, pipe support & pipe checking. Experience with oil and gas, chemical plant, and pharmaceutical industries. Skills / Softwares: AutoCad Basic Plus

AutoCad MEP TWIC

AutoCad Plant 3D Plant Design

Cadworx Revit (Basic)

Navisworks Manage Laser Scan (LFM)

Smart Plant Review Microsoft Office Suite

Bluebeam Revu Teams / Skype / Zoom

Experience:

Hargrove Engineers + Constructors Houston, TX

Area Piping Lead March 2018 - Present

CP Chem – Pasadena, TX

Catalyst Activator Project

• Developed process piping and mechanical designs from concept through construction including equipment layouts for process and mech. facility systems.

• Design in both 2D and 3D including equipment arrangement, P&IDs, pipe routing, sections, and details.

• Checked and corrected drawings associated to project as required.

• Worked closely with project team and ensured that the drawings convey the correct information and are accurate.

• Interpretation of P&ID’s, equipment data sheets and Mechanical flow diagrams.

• Located tie-in with laser scan, created GA drawings, tie-in and line list.

• Incorporated hot tap machine to 3D project model. Responsible for piping material take off for estimate.

• Work closely with process team, structure, mechanical, electrical / instrumentation for coordination of model review for client.

• Guide client through 30%, 60% and 90% piping model review, create tags, notes, and strategy list for construction.

Albemarle – Pasadena, TX

Area Lead Piping Designer

Powder Reslurry Tank Prj.

Nexsil Storage Tank

Pressure Safety Valves (PSV Prj.)

• Perform site visits for tie-in tags, identify tie-in location to incorporate into 3D model with photos and laser scan.

Page 2 of 4

• Create 3D pipe design for process and utility piping with GA data sheets & P&ID’s.

• Develop piping route and locate equipment and nozzle orientation.

• Responsible for piping material take off, coordinating with other disciplines, client model review, incorporate comments from client model review.

• Performed On-site P&ID’s walkdown of plant verifying accuracy of existing PSV location, type, and number.

• Documents PSV with hand sketch isometric with P&ID’s and equipment GA layout. Peroxychem – Pasadena, TX

Lead Piping Designer

Peroxide Purification Project

• Performed multiple site visits for tie-in tags, photos, and P&ID verification.

• 3D pipe modeling of process and utility piping, to incorporate tie-in points.

• Responsible for piping material take off, created demo package with photos and isometrics.

• Mark up existing P&ID’s as per field condition, update P&ID’s as per new scope of work and extract isometrics for construction.

Ineos Chocolate Bayou – Alvin, TX

Area Lead Piping Designer

PP4 Debottleneck

Plant Sample Station

• Create 3D pipe model design for process and utility piping with P&ID’s.

• Incorporate photos to create demolition piping packages and identify tie-in demo.

• Estimated piping for task list on project for FEL2, FEL3 and IFC.

• Identify lines that need to be routed to accessible areas for sample collection.

• On-site visit to performed as built sketches and create piping for 3D modeling.

• Material take-off report and extraction of isometric for construction. TD Industries Houston, TX

Piping Designer / BIM Feb. 2016 – March 2018

Memorial Herman Facility, Houston, TX

Ultra-Pure Water System Prj. Dallas, TX

Galleria Mall Center, Houston, TX

• Guide General Contractors, Architects and Engineers through 30%, 60% and 90% model review, create tags, notes, and strategy list for construction.

• Coordinate module packages, mechanical skids, pumps, mechanical piping, HVAC, plumbing and electrical for maintenance work.

• BIM coordination with less experience drafters, designer, architectural and engineering firms.

• Corroborates and check submitted drawings by architects and engineers with specs and model information for construction.

• Coordinate process / mechanical piping system with civil, structure, equipment, instrumentation and electrical disciplines in mechanical rooms, open areas, and limited space.

Page 3 of 4

• Interpretation of MFD / P&ID’s to update and correct piping models as the projects advance to different stages.

• Extract Isometric for construction, BOM list for project cost estimate.

• Virtual coordination meeting with clients, field support for piping installation equipment, piping spools, field hand sketch for pipe fitters and PM’s. AMEC Foster Wheeler Houston, TX

Area Lead Piping Designer May 2014 – Jan. 2016

Dow Chemical Plant, Gulfstream infrastructure, Freeport, TX Conoco Phillips, Eagle ford stabilizer facility, La Salle, TX Total, Merox unit, Port Arthur, TX

CHS, Desulfurize Catalytic, Laurel, MT

• Followed P&ID’s to hang tags and walk-down lines at site for valves verification.

• Routed pipe within the refinery and configured tie-in location for specific options.

• Performed MTO’s and BOM’s for corresponding pipelines and material.

• Perform equipment vendor checks to correspond with new areas within refinery.

• Build equipment to customer requirements and manipulated equipment to meet line requirements.

• Created and extracted ISO’s to correspond with P&ID’s.

• Worked at site with tie-in locations and finding future tie-in points as well as scanning maintenance.

• Guide client through 30%, 60% and 90% piping model review, create tags, notes, and strategy list for construction.

Engineering & Terminal Services Houston, TX

Lead Piping Designer Feb. 2013– May 2014

Puma Energy LPG, Cataño, PR.

Trafigura Terminal EF-90, Corpus Christie, TX.

• On-site P&ID’s walk-downs to incorporate new scope of work to P&ID’s and update existing as per field condition and new project.

• Detail piping for construction, rendering for client visualization of piping system.

• Checking of isometrics as per piping layout, line list, P&ID and piping specifications.

• BOM extraction (spread sheet) for piping cost estimate, mark up P&ID’s and MFD’s as piping progress.

• Work collaboratively with PM’s, engineers and designers in a team environment to resolve design and accomplish objective.

Flour Guaynabo, PR

Area Lead Piping Designer Feb. 2011 – Feb. 2013

CH2MHILL Guaynabo, PR

Piping Designer Feb. 2009 – Feb. 2011

Orbitech San Juan, PR

Piping Designer / Field Support Oct. 2002 – Feb. 2009 Page 4 of 4

Bacardi Rum Distillery Expansion, Cataño, PR

Pfizer Chilled Water Phase I & II, Barceloneta, PR Amgen, Newpogen / Epogen, Juncos, PR

Wyatt, Chilled Water Expansion, Guayama, PR

Eli Lillie, Reactor Expansion Prj. Guayama, PR

Eli Lillie PR-05, Penicillin Dryers, Carolina, PR

Beckton and Dickenson, Ultra-Pure Water System, Cayey, PR

• Pharmaceutical design for various clients, using the GPM principles and gowning de- gowning for pharmaceutical manufacture facility.

• Performed piping design using 88 degree and 92 degree for no pockets design at all areas, all low point needs to drain or to be use of points.

• Each piping weld will be inspected and certified issued for construction for all clean liquid, clean stem, clean air, or clean gas product.

• On site tie-in point identification for demo package, using photos and P&ID’s.

• Performed sketches for structural miscellaneous pipe supports for future piping.

• Responsible for modeling and extractions of isometrics for construction.

• Create plot plan, tie-in points, ortho drawing and piping detail for installation.

• On-site P&ID’s walk-downs to incorporate new scope of work to P&ID’s and update existing as per field condition.

• Detail piping for construction, rendering for client visualization of piping system.

• Checking of isometrics as per piping layout, line list, P&ID and piping specifications.

• BOM extraction for piping cost estimate, mark-up / modify P&ID’s as proj. progress.

• Work collaboratively with PM’s, engineers, and designers in a team environment to resolve design and accomplish objective.

Education:

Associates of Science, Computer Aid Drafting & Design August 2000-2002 Huertas College, Caguas, PR

Reference:

Sam Bourgeois Lead Piping Designer, Hargrove Engineering 832-***-****

Richard Castillo Piping Designer Supervisor, Foster Wheeler 281-***-****

John Pfeifer Piping Manager, Richard Industrial Group 713-***-****

Contact this candidate