Page * of *

Jarred Lee Hetzel

*** ***** ***** ***** ***.

Farmington, New Mexico 87401

Cell Phone: 720-***-****

Email Address: adjpi1@r.postjobfree.com

adjpi1@r.postjobfree.com

Professional Experience

IIna Ba, Inc.

1812 Schofield Lane, Farmington, NM 87401

Phone: 505-***-****

Survey Technician III/Party Chief, May 2019-March 2020

• Performed various Surveys including Alta Surveys, Boundary Surveys, Retracement Surveys, Layout Survey and Home Site Surveys. Worked mainly for EPA, NTUA, City of Farmington and Navajo Nation. Used Civil 3D 2018 and Leica Infinity. Leica GS 14, 15 GPS Rover and Base with Leica CS 20 Data Collector. Leica Robotic with Leica CS 20 Data Collector. Alpha & Omega Consultants, Inc.

12050 West 52nd Ave., Wheat Ridge, CO 80033

Phone: 303-***-****

Survey Technician III/Party Chief, July 2014-January 2017

• Works as a single man survey crew for various aspects of construction surveying. Preform new site calibrations for GPS control and set up control for Conventional or Robotic control with Differential leveling methods from a common Benchmark for precise vertical as well as horizontal control for future use. Surveyed for commercial, residential, Colorado Department of Transportation and Utility replacement or upgrades. Read site plans, preforms field calculations and works closely with site foremen and project managers. Take excellent field notes and sketches for good documentation reasons. Preformed over excavation certifications and overlot grading staking and very precise building grid layout for future building construction. Preforms ALTA surveys, Topographic surveys, Boundary survey and As-built surveys. Maintains assigned Trimble GPS R8 Rover Unit with TSC 2 Data Collector, Trimble 5700 Base unit, Trimble S6 Robotic Total Station, Nikon Differential Level and company truck. G.A.S. Unlimited, Inc.

15999 City Walk, Ste. 200, Sugar Land, TX 77479

Phone: 281-***-****

Contract Survey Tech for Wood Group Mustang-Houston Office, March 2015-August 2015

• Preforms Auto-Cad corrections on various plats for Oil and Gas Industry using Auto-Cad Civil 3D Version 2014. Received up to 40+ plats per day from a variety of departments within the Wood Group Mustang Company with markups or red lines for preparation for Acquisition for the Lone Star Express Pipeline. Also prepared land descriptions for permanent easement and right of way, temporary workspace, additional workspace and access roads. Performed various title researches and double check wording on the land description are correct and up to date. Committed to working seven days a week with long hours the make tight deadlines. Worked in a fast paced, high stress level and very detail oriented environment.

Page 2 of 4

J.L.H. Land Surveying

2562 Trails End Court, Grand Junction, CO 81505

Phone: 970-***-****

Contract Survey Party Chief/Technician, Auto-Cad Technician, June 2011 – Present

• Performed various survey's for several survey firms; oil and gas for Uintah Engineering and land Surveying (Sidney, Montana), oil and gas for Shell oil Company (Laredo, Texas), Solar Farms for SOS Staffing (Phoenix, Arizona), complete measurements for interior and exterior as well as MEP and ADA for all Walgreen Stores in the whole state of Arizona, and interior and exterior measurements for hotel resorts in Snowmass Colorado for R&R Engineering. These jobs required calculations and excellent field notes and sketches. Equipment Used: Leica GPS 1200+ with Carlson based RX 1250 Data collector, Leica Auto level and Trimble R8 Rover, TSC3 data collector with Trimble Access and TGO, TBC. Required use of ATV's and UTV's to get to remote locations. High security clearance required to access some jobs sites. William H. Smith and Associates, P.C.

550 East 2nd North, Green River, WY 82935

Phone: 307-***-****

Survey Technician, Auto-Cad Technician, December 2010 - April 2011

• Drafted Well Site Plats for Oil and Gas industry, created monument records and updated monument records for the state of Colorado, Wyoming and North Dakota with Auto Cad Civil 3D 2011. Researched original Cadastral Surveys that were surveyed in the mid to late 1800's to update monument records to current status and to verify found Stone or Charred Wood location. Perform Topographic surveys, Well pad staking, Area and Volume surveys, calculations, maintained excellent field notes and sketches. Equipment Used: Leica GPS 1200+ with Carlson based RX 1250 data collector, Trimble GS 200 3D Scanner with Trimble Tablet Rugged PC data collector. This job required the use of ATV's, UTV's, Snow Cat, and Argo's to get to remote locations.

Eaton Land Surveying, Inc.

151 S. Walnut Ave. Las Cruces, NM 88011

Phone: 435-***-****

Survey Party Chief, March 2010 - December 2010

•Survey for the Rebuild of the levy for the Rio Grande River in Hatch, NM and in Canutillo, TX. Developed the DTM's and TIN's for 3D machine control, performed cross sections to provide quantities, staked Right of Way and check grade as needed. Verified grade to pass tests for the U.S. Government and for F.E.M.A. specifications. Equipment used: Altus APS-3 GPS with Allegro (Carlson SurvCE Software), data collector, and Trimble 3D Machine Control. Page 3 of 4

Merritt L.S., L.L.C.

743 Horizon Court, Ste. 100B, Grand Junction CO 81506 Phone: 970-***-****

Land Surveyor, February 2007 - January 2010

• Member of the WPLSC. Read site plans, perform calculations, maintained excellent field notes and sketches. Conducted utility pick up right of way to right of way for engineer planning. Perform level looped for several miles a quarter mile at a time. Performed Topographic surveys, Alta surveys, Land Improvement Surveys, simple land divisions, set several OPUS points, set tons of lot pins, curb and gutter lay out, building corner lay out, slope staking, water and sewer line lay out, as built and put into an Excel spreadsheet format. Received railroad surveying training, records research with the county and the BLM offices. Installed new versions of software and the 09 Geoid for the instruments, data collectors and on Trimble Geomatics Office, and Trimble Business Office. Conduct weekly collimations on the instrument and two peg the levels and check and adjust all tri brachs for complete accuracy. Current MSHA certification and lamp and gas card. Staked hundreds of uranium claims as well as survey existing uranium mines for mapping purposes and set several drill holes for exploration. Ran control network from the outside in for two different coal mines as well as set an air shaft for one of these mines. Currently, I have five years underground mining experience. Equipment Used: Trimble 5700 GPS Base, Trimble 5700 Rover, Trimble 5800 R6 Rover, Nikon Level, Nikon 820 Total Station, Trimble S6 Robotic Total Station, and Trimble 360 + 2mm Prism. Controllers Used: Trimble TSCEII Data Collector, Trimble ACU Data Collector, and Trimble TCU Data Collector. I have an HP48GX with Survey GX Card, 512K Ram Card, and HP 33 Calculator. This job also required the use of ATV's and snowmobiles to get in remote locations.

Arch Coal, Inc. - Mountain Coal Company - West Elk Mine PO Box 591 Somerset, CO 81434

Phone: 970-***-****

Underground Surveyor, April 2005 - May 2007

•Set points underground to advance coal miners, set underground control points, set underground blasting patterns, and staked out conveyor belt drive components underground. Conduct volumetrics to determine actual mined coal, in charge of surface, GPS calibration, and calibrated to mine grid with GPS unit to survey in surface drill holes to hit exact locations underground during thermal heating event. Conduct surface monitoring of subsidence with total station. Worked with various individuals and under extreme climate conditions. Equipment Used: Nikon 820 Total Station, Nikon 520 Total Station, Topcon 520 Total Station, Topcon 220 Total Station, TDS 48 Data Collector, TDS Recon Data Collector, Trimble GPS 4700, Trimble GPS 5700, Trimble GPS 5800 with Pack Crest Radio HBP450, used data collectors TSE and TSE2 with Bluetooth, used 2006 and 2007 Auto Cad and Surv. Cad to download and upload points into data collectors, and also used Trimble Geomatics version 11.7. Used ATV's to get to remote locations. This position required being extremely detail oriented and the ability to work in a fast-paced and highly volatile environment.

KS Professional Surveying, Inc.

2591 B Road Grand Junction CO 81503

Phone: 970-***-****

Land Surveyor, August 2004 - April 2005

•Read building/site plans, use of Trimble 4700 GPS Survey unit, conventional Nikon 520 Total Station equipment, set property pins, boundary line adjustments, grid staking of non-existing building, conduct level loops. Work with various construction sites and climate settings. This position required being extremely detail oriented and the ability to work in a fast-paced environment. Page 4 of 4

EDUCATION

Central High School

Grand Junction, CO

High School Diploma/GED 1998 General Studies

CONTINUING EDUCATION

• PLSC Fall Technical Sessions

• Delta/Montrose Technical College - Survey Courses

• MSHA Refresher Courses, also current lamp/gas card

• OSHA Certified

• CPR/First Aid Certified

ASSOCIATION

• Professional Land Surveyors of Colorado - Western Colorado Land Surveyors

• Member of the WPLSC

• Regional Professional Land Surveyors of Colorado Conferences/Meetings

• Have several certificates of completions from Denver University SOFTWARE KNOWLEDGE

• Microsoft Office Word, Excel • TGO/TBC • Civil 3D 2010, 2014, 2015

• Auto Cad Soft Desk 8 • Auto Cad 06,07

VOLUNTEER WORK

• Cimarron North Homeowners Association, 2007 - 2011. Assisted in coordinating community events and maintained HOA irrigation.

• Assisted neighborhood seniors, removing snow from driveways/sidewalks, and handy-man services.

• Colorado State University Cooperative Extension, October 2002 - 2005. Assisted in Tree Auction and Plant Sale - worked with other volunteers at cashier table, educational events such as Landscapes West Gardening Conference and Tamarisk Symposium - assisted at registration tables and assembling conference packets.

• Grand Junction Jaycee's, October 2002. Assisted in building haunted house.

• Royce-Hurst Humane Society, September - October 2002. Cleaned animal pens, walked dogs, assisted in various small projects.

REFERENCES

• Kurt Shepherd, Grand Junction, Colorado

• Ernest Clement, Houston, Texas

• Tom Sylvester, Grand Junction, Colorado

• Ken Gutierrez, Houston, Texas

• Bud Lambert, Wheat Ridge, Colorado

Phone and addresses available upon request

Contact this candidate