Michael L. Coe

Mechanical & Design Engineer, Creative Thinker, Innovator

adjo12@r.postjobfree.com 315-***-**** 2436 Deanwood Drive, Raleigh, NC 27615 linkedin.com/in/mlcoe

WORK EXPERIENCE

Seeking: Position where I can use my creative, innovative, leadership, problem solving and technical skills to design and develop elegant and useful technology 2

Spencer Health Solutions Morrisville, NC /April 2020 – Present The only medical device company with a direct-to-patient device that integrates pill dispensing, data analytics, and telehealth technology. 1

Senior Mechanical Design Engineer & Project Manager

• Lead analytical and technical team members to complete analysis and planning, and/or program execution requirements.

• Lead and conduct all mechanical design, testing, evaluation, and fabrication components.

• Create all parts, assemblies, and drawings. While creating and conducting all model simulations.

• Work with manufacturers, within and without, to ensure products are successful: FAIs, PPAPs, DFMs.

• Provide dynamic leadership in the planning and execution of sustaining projects. Strong interpersonal intelligence shown in all aspects of project execution interactions with product management, Spence Health Solutions executive management, and internal project team members.

• Deliver strong project management skills, especially the management of project scope and milestone on time deliveries across multiple, concurrent projects. Communicate effectively on progress, risks, and action plans. Utilize project management best practices for monitoring and controlling project performance

• Utilize excellent communication skills to build consensus and influence others across multiple internal organizations.

• Proactively identify, communicate, and manage risks and issues that threaten the success of projects and to provide solutions that meet or exceed expectations.

• Employ effective change management best practices while implementing sustaining engineering projects.

• Continuously improve on Spencer Health Solutions supporting processes and procedures based on past experiences and lessons learned for PM and organization developmental benefit.

• Establish and adhere to project plans and schedules. Proactively identify out-of-scope opportunities during the execution of projects and address them in a timely fashion with the appropriate team members.

• Utilize positive people skills when providing work direction and status review for assigned project team members.

• Collaborate and seek commitments from internal resources required to achieve project objectives.

• Compile and analyze data to come to a data-driven conclusion on all aspects of the project. Projects:

• Spencer V2 – A new iteration of spencer, at home direct-to-patient pill dispensing unit, easier to refill, use, and diagnose.

• Clam Shell / Refill – A new refill package that the pill packs are spooled onto. More cost effective, easier to use, light weight.

• Spits – A custom project and solution with Spits, a large Dutch pharmacy. Hybrid spooler for large volume spooling of pill packs. Teleflex Incorporated Morrisville, NC /January 2019 – December 2019 A global provider of medical technologies designed to improve the health and quality of people’s lives. Senior Product Development Engineer

• Conducted R&D projects associated with the design and design modifications of medical devices, components, models, or mechanisms.

• Prepared and coordinated formal documentation of the product Designs, Risk Analysis, Product Specifications, Market Specifications, etc. according to established Product Development Procedures, and initiates formal reviews to get approved per said procedures.

• Developed, maintained and published product Development Plans for assigned projects with critical milestones and timelines.

• Investigated and resolved technical problems involving product performance, production equipment or facility systems affecting production.

• Coordinated the product design and development process with appropriate support departments such as engineering, regulatory, documentation, tooling and manufacturing.

• Served as the project leader for assigned projects and responsible to follow up on all aspects of projects, including reviews with support groups and outside resources where applicable.

• Prepared and followed up on the preparation of design drawings, specifications, estimates of costs, mainframe updates, etc.

• Worked with manufacturing in the justification and the selection of the manufacturing process and assigns projects and establishes priorities to ensure deadlines and goals are achieved.

• Developed assembly methods and procedures; creates engineering draws and specifications. Projects:

• Smokey – Disposable EZ-IO (Intraosseous Access) Driver, fast and effective solution to gain vascular access in difficult to obtain emergent, urgent, or medically necessary cases and provides peripheral venous access with central venous catheter performance. PAGE 1 OF 4

adjo12@r.postjobfree.com 315-***-****

Advanced Reconnaissance Corp. Fishkill, NY /October 2010 – August 2015 Senior New Product Development Engineer /August 2013 – August 2015

• Supported efforts within the group in creation and improvement of specifications, design, and test methods for new products and ensured these reflect identified functional requirements.

• Participated in the transition and implementation of new products from R&D into potential manufacturing.

• Worked with team and machine shops to identify alternate materials that would meet the quality and functional requirements to reduce raw material cost for current products.

• Provided hands on support to all engineering efforts as required.

• Produced the end product of requested tasks in the form of components, assemblies, drawings, data files, proposals, reports, or presentations.

• Included responsibilities listed under Lead Mechanical Engineer. Projects:

• QuickSilver – Smaller commercial airborne Hyperspectral Imaging (HSI) device used to scan fields for agricultural purposes.

• QuickSilver Prime – Redesign of QuickSilver unit, many improvements made to increase field of view and to produce a better image. 4

A world leader in research, development and production of reconnaissance advanced multispectral and hyperspectral sensor systems with real-time processing for intelligence, surveillance and applications. 2436 Deanwood Drive, Raleigh, NC 27615

Edgewell Personal Care Milford, CT /September 2015 – July 2016 Senior Reliability Engineer

• Managed the identification and reduction of asset risk via loss elimination, risk management, life cycle asset management and root cause analysis (RCA) to current and future Schick and Playtex products using Failure Mode and Effects Analysis (FMEA) and current 8D standard practices.

• Designed, implemented, oversaw and conducted tests and testing criteria for new product launches to ensure products met schedule, performance and safety requirements and to continuously improve current product lines.

• Worked with third party vendors by leading Production Part Approval Process (PPAP), First Article Inspections (FAI) and running Process Failure Mode and Effects Analysis (PFMEA) to insure that our products were being manufactured within spec and passed a fit and function test to supply the consumer with the best possible product.

• Monitored consumer complaints on Playtex gloves and led the Consumer Complaint Review (CCR) on this product to share with the entire company. Identified any trends within the complaints, designed and executed action plans to improve the product or process to improve the line and reduce consumer complaints.

Projects:

• Diaper Genie – Baby diaper disposal container that seals diapers in a patinated film to protect against germs and odors.

• Sipster – Drinking cup designed for toddlers which prevents or reduces spills.

• Hydro – Five-blade razor system with a skin guards advanced hydrating gel and flip trimmer. Formerly Schick/Energizer, a global team that specializes in designing, developing and supporting various products with a focus in personal care.

Morrisville, NC /August 2016 – December 2018

Bioptigen Inc. / Leica Microsystems

Senior Mechanical Design Engineer

• Worked with the product development group covering the Bioptigen Optical Coherence Tomography product family.

• Worked with International teams to solve engineering design problems, supply chain concerns and manufacturing needs.

• Responsible for the mechanical design and documentation of products being developed.

• Mechanical lead for an International team integrating Bioptigen’s OCT systems into Leica’s family of microscopes, new and retrofit.

• Ensured that design and documentation processes are fully compliant with quality system requirements.

• Interfaced directly with manufacturing engineering group to drive the transfer of completed projects into manufacturing.

• Coordinated with third party suppliers and vendors on all

• Created part drawings, BOMs, assembly drawings.

• Drafted mechanical design requirements

• Received and coordinated mechanical/opto-mechanical design deliverables from both internal and external sources for product development projects including detailed design and documentation.

• Prepared mechanical design review materials and presentations.

• Prepared and coordinated RFQ packages.

Projects:

• EnVisu – Cart base, mobile, hand-held OCT systems used in clinical and research applications. World’s only hand-held OCT solution approved by the FDA in the diagnosis of physiological and pathological conditional of the eye.

• EnFocus I – Intrasurgical OCT solution for new and existing surgical microscopes. Uniquely designed objective delivery deigns, injects the OCT signal below the optics carrier and not through the microscope oculars.

• EnFocus II – Culmination of years of OCT experience. Combining the benefits of EnVisu and EnFocus I. EnFocus II condenses all of the optics and electronics into one, small package. Can be used as a desktop, cart or integrated system. Pioneer in the development and manufacturing of leading-edge Spectral Domain Optical Coherence Tomography (SDOCT) equipment and software.

3

Michael L. Coe

5

PAGE 2 OF 4

Lead Mechanical Engineer: /October 2011 – August 2013

• Led team of multiple disciplines; mechanical engineers, electrical engineers, optical scientists, physicists, technicians.

• Collected, interpreted, and clarified customer requirement, then developed/ modified designs to meet customer provided requirements using both internal and external resources.

• Actively sought training to improve skills. Ensured technical lessons were reviewed, learned, and disseminated.

• Mentored junior engineers and technicians.

• Designed and oversaw fabrication of World’s first hand-held hyperspectral imaging device used to detect buried Improvised Explosive Devices (IEDs) and for various agricultural purposes; see Projects, Mechanical Engineer.

• Led team to reduced size, weight and power of an aircraft mounted system to yield solder mounted system, Terra Angler.

• Developed project schedules and budgets, in accordance with client meeting and company needs.

• Included responsibilities listed under Mechanical Engineer. Projects:

• Terra Angler – Military soldier mounted device used to scan areas to detect buried IEDs. Modified aircraft mounted, 450-pound system; reduced size, weight and power down to a 15-pound, battery powered system.

• Terra Trakker – Military vehicle mounted device used to detect buried IEDs. adjo12@r.postjobfree.com 315-***-****

Trans. Tech Bus (Contract)

Mechanical Engineer:

• Worked with executive team to develop new products, including a new aerodynamic, fuel-efficient bus body.

• Oversaw the R&D team as they fabricated new bus design.

• Set up tests in compliance with DOT and other bus safety specifications to ensure design was safe.

• Oversaw production of new design.

• Created 3-D models of various products using SolidWorks.

• Created Bus Floor Plans, using AutoCAD for customers.

• Released shop drawings and oversaw the construction of said projects.

• Assisted the owner with new product development. Modified existing and created new drawings in both AutoCAD and Solid Edge as necessary.

• Built B.O.M.'s (using D.B.A. Manufacturing) for new and updated assemblies.

• Created programs for the CnC machine (Amada, PEGA 345 58 STA AI) and the waterjet machine (Flow Hydromain Pro 1313) using FabriWIN.

Projects:

• Modular floor design – company was using steel beams to build floors. I designed modular floor segments that could quickly and easily be installed, increasing factory output by 50%, from 12 buses daily to 18.

• Aerodynamic Bus Design – redesigned parts of the buses body and all of the buses fiberglass components with aerodynamics, weight reduction and coefficient of friction in mind. Was able to increase fuel efficiency by 25%, from 16 miles per gallon to 20 miles per gallon.

6

Optimum Window Manufacturing

Mechanical Engineer:

• Assisted with new product development; performed modifications on shop drawings as per client’s request.

• Collaborated on shop drawings with architects, general contractors and customer, owner of residence, to insure product would be made to spec.

• Created B.O.M.'s for new and updated assemblies using computer software, supported manufacturing with drawings & cutting schedules.

• Oversaw production to insure that the product was made to specifications and delivered correctly and on time.

• Integral part of the life cycle of a project, from initial conversations through final installations and customer follow-ups. Projects:

• University of Colorado – designed, oversaw production and led team on a project of over 400 windows Warwick, NY /August 2009 – September 2010

Ellenville, NY /July 2007 – August 2009

A manufacturer and designer of industry-leading Type-A school and commercial buses. Known for its innovative and fuel-efficient conversion designs.

A customer service driven, custom metal window and door designer and manufacturer. Servicing commercial, high end residential and landmark applications.

2436 Deanwood Drive, Raleigh, NC 27615

Mechanical Engineer: /October 2010 – October 2011

• Worked on a team to design and develop an airborne hyperspectral imaging sensor whose primary function is to detect buried Improvised Explosive Devices (IED’s) with high accuracy.

• Designed systems mechanical components; mounts, chassis, frame, cases, supports, all in SolidWorks, as well as assemble systems.

• Worked with physicists and optics team to design spectrometers for various wavelengths:

• Assembled mirrors onto mounts, of my own design.

• Worked with electrical engineers spec-ing out, designing and overseeing the manufacturing of various power boxes; power supply box, DC distribution box and calibration box.

• Designed sensor-to-plane coupling in compliance with pilots and their specifications.

• Worked collaboratively with various machine shops. Worked closely with these shops to ensure that our parts were delivered promptly and accurately.

• Oversaw and participated in engineering test flights including; setting up test area, supervising data collection test flights, reviewed collected data with scientists.

• Produced and organized B.O.M.’s, Status Updates, Part Numbering System and other bookkeeping processes.

• Met with clients to obtain the desired specifications, and then followed up by leading a team of various disciplines to deliver the requested product.

Projects:

• Fisher V1 - Military airborne HSI device used to scan areas to detect buried IEDs. Detection accuracy of 96%.

• Terra – Commercial tripod mounted HSI device used primarily for agricultural purposes: crop health, water distribution, pest assessment, etc.

Michael L. Coe

7

PAGE 3 OF 4

EDUCATION

Clarkson University

Bachelor of Science in Mechanical Engineering (BSME) GPA: 3.4/4.0

Potsdam, NY / May 2007

adjo12@r.postjobfree.com 315-***-**** 2436 Deanwood Drive, Raleigh, NC 27615 American Society of Mechanical Engineers

Member

ember

/ May 2007 - Present

ORGANIZATIONS

PERSONAL SKILLS

CREATIVE

PROBLEM SOLVING

PROBLEM ID

INNOVATIVE

ORGANIZATION

TEAM WORK

DETAIL ORIENTED LEADERSHIP

CONSTRUCTION

PRESSES & BENDS

SHEET METAL

WIRING & CABLING SOLDERING

LATHE & MILL

MACHINING

WELDING: MIG, TIG, STICK

PROTOTYPING

PRODUCTION SKILLS

PAGE 4 OF 4

PROFESSIONAL SKILLS

MS OFFICE SUITE

SOLIDEDGE

C++

SOLIDSIMULATION

ENGINEERING STDs

PRODUCT DEVT.

SOLIDWORKS

GD&T

LABVIEW

EPDM

MATLAB

REGULATED ENVIR.

TESTING

VALIDATION QUALITY ASSURANCE VERIFICATION

COST ANALYSIS

DOCUMENTATION BILL OF MATERIALS

MINITAB

XFMEA 8D / 6 Sigma

RCA

COMMUNICATION

AUTOCAD PROJECT MGMT PROGRAM MGMT

AGILE

Michael L. Coe

Contact this candidate