RAMAPRASAD,NADIPURAM

***** **** **. *

Minneapolis

MN-55442

612-***-****(cell) E-mail: adjm1y@r.postjobfree.com

Qualification Summary

** ***** ** ******/**** Stress mechanical engineering, experience including positions in the petrochemical, fossil, nuclear, Oil & Gas (15 years) and power industries. Experiences have yielded both Technical expertise and practical application with proven strengths including:

Professional Experience

· Pipe Stress Analysis (Caesar2&AutoPipe) · Piping Material selection &Take off

· Pipe support Design & SPR · FEA Analysis (Nozzle Pro & Anysis)

· Equipment design, Valve selection · Very much Familiar with AutoCadd

2018- Present Senior piping Engineer, Worley Parsons, Park row

Air liquide – MN-ASU, Bay city-LMA, Port Arthur- HPU & Husky Refinery

Develop Critical line list, check P&ID from line list, Stress analysis of all the lines, including checking (Mumbai work) making sure comply with B31.3 Code, Flange leakage, nozzle loads, equipment loads, Caesar Analysis, checking stress,Isometrics with the Caesar Model, PSV force check, Nozzle Pro worked on all the (3) Air Liquide 510 stress isometrics, still working on Additional scope of work for . Bay city – LMA, around 10 calculations, also working for Husky refinery as Sr. piping engineer. Similar work as above.

April 2017 to Sept.2018 : Eagle Valley Power Plant (2) HRSG units 650 Mw Martinsville, IN

Field Piping/ Mechanical engineer: Field Walk down Piping systems per Isometric & P&ID

Check pipe supports, Hangers and Valves for location & operability, witness Hydro test

Systems and walk down for leaks in the system. Gather Technical Data analysis & Reports.

Practiced and accepted good engineering codes & standards on the job.

April 2015-Feb2017: KBR – 601 Jefferson St, Houston, TX-77002

Piping Technical adviser for Piping and piping stress for Marshalltown, IA (HRSG)

Responsible for all pipe stress analysis, springs, Expansion joints and pipe supports and Pipe spools of all Production check Dwg’s and Isometrics. Familiar with ASME B31.3 & B31.1

Feb 2012- April 2015: Burns & McDonnell-1700 West Loop south, Houston, TX-77023

Sr. Piping Engineer: Responsible for piping activities, Valve list, SP item list, Design Basis doc, Line list, Including the Pipe stress Analysis (CaesarII). Very much familiar with all code, including pressure vessel codes, ASME B31.8, API RP 14E, API6D, API 600, ISO14692, ISO 15156 and. Familiar with P&ID and PFD &smart plant. Worked on LNG Plant, Freeport, TX, Evaluated Vendor Bids and Drawings. Very familiar with AutoCAD, Excel & PI&D. Developed & reviewed Clients engineering Drawings and standards.

April 2009-Jan 2012: Ambitech Engineering Corp. : 1411 Opus lane, Chicago, IL - 60515

Pipe Stress Supervising Engineer, Responsible for all Mechanical/Pipe stress Activities conducted in the group. Equipment Qualification, Rerating of equipment, Pressure vessel Etc. and piping & Vales, Stress analysis activities (CaesarII), FCC, CCR and Coker analysis, Onshore and Offshore projects &LNG, Very well familiar with Smart plant Review, ASME B31.8, ASME B16.5 and DNV codes. worked on FEED for LNG. Reviewing and monitoring of piping deliverables. Mentor juniors, and Manpower forecast, & AutoCAD. Reviewed vendor Pump drawings.

March 2008- 2009: Aker Solutions . Principal Engineer Mechanical/ Piping/Pipe stress/Rot equip.

3750 Briar park, Houston - TX- 77042

Responsible for Equipment Operability for Various refineries around Gulf coast area. Responsible for All Stress Analysis activities (CaesarII) per code ASME B31.3 Including Field Support, Code compliance, with industry standards, Worked on Bigler off shore job, Dow and LNG Projects, selection of valves. Worked on FPSO in the cost of Australia. Solved engineering Problems.

Sept 2006- Feb 2008: Jacobs Engineering. Lead Piping Engineer/Mechanical/Pipe stress

5995 Rogerdale Road, Houston, Texas

Responsibility: In charge of British Petroleum, Texas City Revamp job, Alky 3 Repositioning and Shell Projects. Supervising group of 25 people with PDMS Smart Plant, Pipe Stress and Piping engineers, Verified, checked and Analyzed over 500 Pipe stress (CaesarII) calcs for the Port Arthur Shell Refinery Expansion Job. Also responsible for the Line list, Design Temp and pressure, and wall thickness per latest ASME code, also Checking Materials and Pipe supports per Jacobs Standards. Produced Line list for Critical Lines. Reviewed general Arrangements and Isometrics, flange leakage and check FEA Per FEMA program. Mentor for Junior Engrs In Pipe stress Analysis, practiced good engineering Standards

OCT. 1994 to 2006 Lead Piping & Stress Engineer Deltak LLc (supervisor) GasTurbine

(HRSG’s single to Triple wide) -2905 NW Blvd, suite 150, Plymouth, MN- 55441

Responsibility: Is to ensure that adequate support and flexibility are provided to avoid overstressing of piping and to limit reactive load on sensitive equipments. All critical piping systems to be analyzed and qualified as per the requirements of ASME B31.1/ASME B31.3/B31.8. Equipment critical lines that are connected to Pumps, Compressors, Turbines, Air Cooled Heat Exchangers, Fired heaters etc. to be qualified to limit the nozzle reactions as per the norms given in API 610, API 617, NEMA SM23, API 661, PI 560, ASME, DNV, ABS Guides, BS and UKOOA codes respectively. Design, selection and preparation of specification for various types of Expansion joints, Variable and Constant Effort Spring Supports are also part of stress analysis duty. The software being used for stress analysis is CAESARII. Also familiar K-Pipe and Auto Pipe Programs, very much familiar with, PDS PDMS and ANSYS, Strong Interpersonal skills, interact with all groups.Field Experience.

Detailed analysis of pressure vessel nozzles and support structures using other finite element stress analysis tools like FEMAP and CAEFM also are part of my responsibility. This analysis requires detailed stress analysis per ASME B&PV code Section VIII Div 2 rules. For European customers we use EN codes such as EN12952 and EN13445 for to demonstrate the design life (fatigue life). Responsible for analysis of piping Systems for Exxon Mobil’s Beaumont Texas Combined Cycle Power plant. Was involved in the piping analysis of Madison Wisconsin Simple Cycle plant, Baytown Texas Exxon Mobil Combined Cycle power plant, BECO Power plant in Boston, Des Moine Power Plant in Iowa etc. Also worked on FCC plants, Hot oil, cryogenic, and High-pressure Steam.

Major achievements which resulted in cost savings for the company:

Development of computerized analysis tools for design life evaluation.

Derivation of closed for equations for complicated header supporting arrangements to evaluate their stiffness to be used in piping analysis.

Standardization of company procedures and training junior engineers.

Bechtel Work History: 1982 – 1994 Major Responsibilities have Included:

· Mechanical Engineering Staff Specialist for Piping and Valves, Pipe stress Analysis. Responsible for Surveillance of all Piping Design activities Including Support design, Code compliance, Coordination with industry standards, Piping Support selection, Generated Piping and Instrument diagrams ( P&ID )and System flow diagrams per project criteria and applicable codes and standards; sized, selected,

· Advisor to Major nuclear, fossil, and Petrochemical projects Responsible for coordination of Piping Design Pipe stress and support design and Equipment arrangement with Bechtel Standards

· Sr .Piping Engineer on Browns ferry, Peach bottom and Susquehanna Steam Generating Stations.

· Responsible Systems Engineer for Diablo Canyon Nuclear Plant's Maintenance, Pipe Stress analysis, support design Field supervision for the installation of supports, Q.A functions,

· Responsible Engineer for Major Fossil Projects, Developed, designed, and wrote Piping specifications/Materials and developed pipe support standards. Developed Process Flow Diagrams, Logic diagrams, systems and Equipment layout and Vendor Drawings / Operating manuals.

· Developed, Designed, Planned and Supervised Pilot Plants ( Startup, modifications, Pipe stress support design ) and research projects, Including Fossil and Coal Fired Plants

· Trained & supervised junior engineers & operators for Startup and maintenance projects, programs and nuclear plant's work package preparation.

· Worked on Proposal for coal fired plant SO2 scrubbers, sludge disposal, Waste / water treatment projects including system design, mechanical equipment, system specifications, P&ID, FD, Process calc.

Previous Work History: 1974 - 1982 Extensive experience in Engineering departments of several large Consulting companies. Like Burns &Roe inc. Gibbs and Hills and Chemplant Designs inc. Responsible for coordination of Piping Design and Equipment arrangement with generic Standards. Stress Analyst for Stone & Webster Corp. Responsible for Review & Approval of Field fabrication & installation of the Piping and other Pipe support specifications; Coordination with QE/EA/QC/QA.

Education References:

BSME, Mechanical Engineering

BS, Physics and Mathematics, (Bangalore University, India)

American Society of Mechanical Engineers

Professional Memberships: ASME Ref: Mr. Jorge A Bianchi. PE (KBR)

Citizenship: USA 713-***-****)

EIT (Texas) Damodaran Sriramulu (manger piping)

Able to Obtain PE adjm1y@r.postjobfree.com Tel # 714-***-****)

Contact this candidate