Development and preparation of specification. Preparation of datashe

Instrumentation Control Engineer

Professional Objective:

To achieve a leading role in engineering, automation and other technology related sectors to improve my skills and pursue a dynamic career. Career Summary:

I am having eight years of working experience in instrumentation control, designing, developing, installing, managing, and maintaining Distributed Control System, PLC and supervisory control and data acquisition (SCADA). Installation, maintenance, and commissioning of different types of flow meters. Testing, maintenance, size calculation, and calibration of control valves. Loop testing and configuration of pressure, temperature, and level transmitters.

Experience:

Currently, I have been working at CAP Engineering Co. as Instrumentation Control Engineer since 30 Dec 2016 to onward.

Previously I had been working at S.A Automation (Pvt.) Ltd as an Electrical and Instrumentation Engineer from 1

st

march 2013 to 28 Dec 2016 (Experience_3 Years,

9months).

I had been working at PAK Power System (Pvt.) Ltd as an electrical supervisor from 1 st

Feb 2012 to 28 Feb 2013 (Experience 1 year, 1 month). Job Description at CAP Engineering Co:

Key features of my job responsibilities are the execution of automation projects, project life cycle including system design.

Deals in procurement, integration, testing, FAT, SAT, Commissioning, start-up, and maintenance support for projects.

Development and preparation of specification.

Preparation of datasheet

Preparation of JB’s specification datasheet.

Preparation of control system architecture.

Deliverable termination drawing, instrumentation datasheet, logic diagram preparation, piping and instrumentation diagram

Azhar Ali Mubashar

Address : House No. 4/c, Anar kali bazaar, Hasilpur, Dist. BWP Cell : +92-331-*******

E-mail : adjihj@r.postjobfree.com

Skype ID : azhar.ali.mubashar

Sizing calculation.

Preparation of as-built drawings.

Maintenance work responsibility

I have worked on the following instruments.

Pneumatic/ Electronics control valves

Troubleshooting & Calibration of Temperature, Pressure, Flow, and Level transmitters (ABB, Honeywell, Yamatake, Yokogawa, Alia, Micro-Instrument, Sure- meter )

Calibration, maintenance of Control Valves & Shutoff valves ( Arca, Fisher, Leneo, Tomauo)

Positioner ( Samson, Arca, Honeywell, Fisher, Siemens)

Magnetic flow meters (Siemens, Yokogawa, Krohne, ABB, Alia, and Micro instrument).

PH Transmitter (ABB, Yokogawa, Rosemount)

Controllers ( Yokogawa UT 550,520, Honeywell UDC 300, Yokogawa YS 1700)

Indicator, pressure Gauges(Ashcroft, Wika)

Pressure & Vibration Switches, Level switches and Rotameter(Krohne, Alia, Micro- instrument)

Load cell installation and calibration on stainless steel tank having capacity of 20 Ton.

Testing and commissioning work responsibilities

Testing, field instrument calibration and site commissioning work of Instruments perform at CAP.

Parameterization of the instrument with Hart communicator. Loop and sequence tests for DCS and PLC.

Monitor the function of instruments.

Confirm availability of inputs, alarm, and switches on DCS coming from the field.

Manually check the operation & travel of control valves & shut off valves.

Drawing, reading, and work on P&ID, ILD, hock up drawing. Work on a standard instrument

Handy Cal Calibrator (CA51/71 Yokogawa)

Pneumatic calibrator (Eurotron Model Micro Cal P.)

Hand Held Communicators such as Smart (Honeywell, Yamatake) & Hart ABB, Rosemount 275, Yokogawa BT200, EMERSON 475,375.

Jofra calibrator (A metex Model 650 SE)

Process calibrator fluke 475 for different source e.g. R, C, mV, mA.

Hand-held Calibration Process calibrator Muller PC-MF for different sources e.g. R, U, TC, RTD, I, F

Analog & Digital Multi-meters

Control System, PLC & DCS experience

Programming of all brands (Siemens, Honeywell, UWNTEK, SUPCON, AB) DCS and PLC.

UW500 DCS by UWNTEK.

Centum CS3000 DCS by Yokogawa

DCS PCS7 S400 redundant controller

Sematic S7-200 PLC by Siemens

HC900 hybrid controller PLC by Honeywell

Sematic S7-300 PLC by Siemens

Projects:

Designing, developing and site commissioning work of UWNTEK distributed control system on Methyl acetate plant. Methyl acetate plant has a capacity of 20,000 liters/day. Esterification, dehydration, and THF loop control on UWNTEK DCS. Testing, maintaining, and modifying existing UWNTEK 500 DCS for MSDS.

Designing, developing, installation, and site commissioning work of UWNTEK 500 DCS on High-Pressure Boiler flow capacity of 80T/h. A total number of I/O’s 350.Three element control loop, Bagasse feeder ratio, and furnace draft pressure loop control on DCS.

Instrumentation, commissioning, and inspection work of ICI Nutrico Morinaga Blending project. This project includes JB’s specification, Termination, and as- built drawing.

Designing, developing, and programming of vigor, Mitsubishi, Delta, and Siemens S7 300 PLC’s on different process.

Designing, developing, and programming brainchild HMI 730, weintek MT- 8104IP HMI, and LS HMI eXP60-TTA/DC.

Testing and maintenance of oil on water instrument, float switches, and ATG level sensor in Total Parco oil Depot.

Designing, developing, installing and commissioning of MCC control panel in Total Parco Depot. The pump cannot operate until all safety conditions fulfill by the PLC-based system.

Designing, developing, and commissioning of Honeywell HC 900 hybrid PLC on Falling Film Evaporator. The emergency hot water valve loop operates with the help of flow, level, and pressure of evaporator. The exhaust pressure loop operates according to the set point of exhaust line pressure.

Designing and installation of SCADA system of Auto Cane Feeding system in Layyah sugar mills

Designing, installation, programming, and commissioning of Deep Bed Filtration

Designing, developing, and commissioning of UWNTEK 500 DCS system for Falling Film Evaporator. The evaporator capacity is 6000Litres. All Emergency hot water and exhaust loop control efficiently.

Installation and commissioning of magnetic flow meters, steam flow meters, vortex flow meter, and capillary type of level transmitter and pressure transmitter on FFE.

Data acquisition of Siemens flow meters on PC and Paperless recorder.

Installation and commissioning of MOV control valve, butterfly control valve pneumatic, and electric control valve.

Installation and commissioning of Brainchild, Adtek and Laurel controller on different process

Installation and commissioning of boiler safety management system in M/S Philip Morris Pvt Ltd.

Installation and commissioning of all type of VFD’s brands Danfoss, Fuji, Nord, Siemens and Mitsubishi

Synchronization of VFDs on Punjab paper mill. Seven VFD’s operate at different RPM but

Installation and commissioning of VFD on air Compressor, washing machine units, fiber inspection machine, conveyor, vacuum pump, and ID fan.

Installation of DE-superheating system in M/S roshan packages

Testing and commissioning of Flue gas analysis.

Installation, configuration, and commissioning of paperless recorder VR06, PR10, and MI301.

Final Year Project:

Synchronization of ac induction motors.

Expertise:

Vigor PLC

Brainchild HMI

VFDs

Semester Projects:

Design transformer (2010)

Design regulated power supply (AC/DC converter)(2010)

USB & serial port interfacing with computer hardware(2011) Internship/Short courses

Two-month internship at S.A Automation (Pvt.) Ltd. Lahore

A short course of PLC

Multifunction process calibrator and Testo flue gas analysis

Measurement and instrumentation(M & I)

Certified UWNTEK DCS Engineer from HAUNGHZOU UNIVERSITY CHINA Computer Skills

UWNTEK DCS

AutoCAD 2015

RS LOGIC 5000

Master ladder

Siemens LOGO

Simatic manager S7

Languages: C++

MS-Office 2010

Strong hardware/software and network skill in Microsoft Window XP/7/8 PEC Registration

Certified Engineer with Pakistan Engineering Council with registration no. Elect/43506 on Jan 02, 2015.

Award: Extracurricular Activities / Hobbies

Shahbaz Sharif youth initiative merit laptop

Sports: Enjoy playing cricket, badminton and computer games

Surfing the internet to stay updated

Community services, for example, helping juniors in the study and career planning Educational History

B.Sc. Electrical Engineering (CEET) 2008-2012 CGPA: 3.42 out of 4 Punjab University Lahore

F.Sc (Pre-Engineering) 2008 Percentage: 73.54%

B.I.S.E D.G Khan

Matriculation

B.I.S.E Bahawalpur 2005 Percentage: 70.00%

Contact Information

Father’s name : Liaquat Ali

Marital status : Married

D.O.B : 25-12-1988

CNIC # : 31203-1816826-1

Domicile : Punjab

Passport # : AK0018261

Nationality : Pakistani

Contact this candidate