*

CURRICULAM VITAE

RAZEEN RIDHWAN UTHUMAN Mobile: 009*-**-**** 6564

E-mail: adj9zk@r.postjobfree.com

CAREER OBJECTIVE:

Being an aspiring professional to secure a firm where my depth of skill set is recognised and utilize in constructive manner to add value to the company and my career development. ACADEMIC QUALIFICATIONS:

M.Tech Avionics Year: 2013 – 2015

Hindustan University, Chennai, Tamil Nadu, India.

B.E. Aeronautical Year: 2008 – 2012

Mohamed Sathak Engineering College, Kilakarai, Tamil Nadu, India.

(Affiliated to Anna University, Chennai, Tamil Nadu, India). Higher Secondary School Year: 2006 – 2008

KN Boys Higher Secondary School, Kamuthi, Ramanathapuram–District, Tamil Nadu, India. Secondary School Leaving Certificate Year: 2006

Kalaviruthi Higher Secondary School, Kamuthi, Ramanathapuram–District, Tamil Nadu, India. CERTIFICATION:

Microsoft Certified Technology Specialist in MS project 2010 managing projects. SOFTWARE SKILLS:

Operating System : MS Dos, MS Windows, Mac.

Office Automation : MS Word, MS Visio, MS Excel, MS Power Point & MS Access.

Language : C.

Programmes : MS Project, AutoCAD, CFD (Gambit and Fluent). PROJECTS:

Non GPS Navigation using Simultaneous Localization and Mapping (SLAM) in UAV.

Aerodynamic performance optimization of wind turbine blade by using high lifting device. PROFESSIONAL EXPERIENCES:

FLIGHT SAFETY EXPERIENCE:

Span Air Pvt Ltd., New Delhi, India.

Deputy Chief of Flight Safety 10/06/2020 to Till Date

[DGCA Approved Post-Holder]

Zoom Airlines (Zexus Air Services Pvt Ltd.), New Delhi, India.

Manager Flight Safety 01/04/2019 to 17/03/2020

Ligare Aviation Limited, New Delhi, India

Executive Flight Safety 16/04/2018 to 31/03/2019 Job descriptions:

Maintaining & Monitoring the SPI&SPM and the Hazard Log & Review of Risk Mitigation Action.

2

Implementing the Safety Assurance & promotions.

Conducting the SAG meetings and Provide the Feedback to SRC.

Preparing operational documents for Special Operations (PBN (RNAV1_2 & RNAV5), RVSM and ADSB-OUT) and Co-ordinate with DGCA officials for file scrutiny.

Arranging extract of CVR/DFDR in coordination with the engineering department for the incident investigation /FOQA.

Arranging the analysis of the CVR and DFDR data for the incident investigation / FOQA.

Incident / Routine CVR monitoring and their technical write-up as per requirement.

FDR Data Analysis Monitoring & detection of Exceedances parameters [using FliSafe].

Maintaining data storage library of the collected CVR/DFDR data for future analysis and the records thereof. Forwarding recovered data to DGCA for the purpose of enquire as and when required.

Issue of flight safety manual / circulars / instructions including revision of the flight safety manual and other documents.

Co-ordinate and Conduct in PIB activities.

Conducting the Internal Audits and preparing ATR’s for DGCA Regulatory Audits.

Conducting the internal Surveillance [Load & Trim Monitoring, FDTL Inspection, PFMC inspection, BA, Aircraft inspeaction, Periodic MEL inspection, Ramp Inspection and Adverse Weather Operation Surveillance].

Amending of Manuals [FS, SMS, FSDS and ERP] and also monitoring revision other manuals of organization through maintaining the Master Manual Register.

Maintaining online a library of manuals / circulars / instructions including revision of the manuals and other documents.

Maintaining relevant DGCA publications and documents of the flight safety department.

Preparing Incident / Accident technical report as per regulatory requirement.

AIRCRAFT MAINTENANCE EXPERIENCE:

Air India Engineering Services Limited at Trivandrum, India.

Trainee Avionics Technician 01/06/2017 to 0/03/2018 Under In-Plant Trainee as Aircraft Maintenance Technician in Avionics Department on B737- 800 aircraft fitted with CFM56-7B Engines

Job descriptions: Assisted in maintenance checks covering, test, snag rectification, component replacement, operation and inspection of aircraft components / items of equipment on B737- 800NG.

Belmar Aviation Services Pvt. Limited, Bangalore, India

Aircraft Maintenance Technician in Avionics 04/05/2015 to 11/12/2015

Junior Aircraft Maintenance Technician 01/12/2014 to 30/03/2015

Junior Aircraft Maintenance Technician 01/10/2012 to 30/04/2013

Trainee Aircraft Maintenance Technician 05/05/2012 to 06/08/2012 Job descriptions: Routine inspection, minor snag rectification as well as component replacement in mechanical (HA, JE, LA, PE) system on CESSNA-340 fitted with continental TSIO-520NB engine, CESSNA-188 fitted with IO-520AG engine and PIPER CHEYENNE PA31T fitted with PT6-28 engine.

Carry out 25Hrs, 50Hrs, 100Hrs Inspection; troubleshoots the mechanical and structural problem; repair/replacement through dismantling, overhauling and reassembling of aircraft components as per Aircraft Maintenance Manual (A.M.M).

Maintain the aircraft structures, systems and components, following drawings and technical publications.

Carry out line defect rectification; servicing of Nose Oleo Strut and Propeller change.

Assembling and rigging Cessna 340 under direct supervision of Licensed/Approved person and maintaining the repair log and documenting the all maintenance.

Carry out Pre-flight and Post-flight checks and Aircraft Flight Control system rigging and all scheduled & non-schedule operations.

3

Examine Landing Gear and hydraulic system to locate problems such as cracks and leakages. Inspect, Test, Adjust all Avionics equipment such as RADAR, Radio Pulse, Navigation, Autopilot, and compass.

Achievements:

Participated and won “MOST INNOVATIVE DESIGN AWARD” in International Arial Robotics Competition (IARC) Mission7 2014, Yantai, China.

First prize in National level paper presentation for the topic on UAV (Unmanned Ariel Vehicle) at Dhanalaskmi Srinivasan Engineering College, Tamil Nadu, India. Publications:

Title:“Design of Midrange Unmanned Aerial Vehicle” Volume 1 and Volume 2 of these books was published by “LAMBERT Academic Publishing”, Germany on 25th February, 2015 – ISBN 978-3-659-36455-6 and 12 th

May,

2015 – IBN – 13: ISBN – 13: 978-3-659-70613-14.

Technical paper relating to Squadron-II at sixth symposium on indoor flight issues of International Aerial Robotics Competition Mission 7, 2014 Yantai, China. Thesis:

(1) “Aerodynamic performance optimization of wind turbine blade by using high lifting device” published in “International Journal of Scientific and Technology Research

(IJSTR)” – Volume 3 – Issue 12, December 2014 Edition.

(2) “Non GPS Navigation Using Simultaneous Localization and Mapping in UAV” published in “International Journal of Application or Innovation in Engineering & Management (IJAIEM)”- Volume 4, Issue 1, January 2015 Edition.

(3) “Optical Flow Navigation in UAV” published in “International Journal of Advancement in Engineering Technology, Management & Applied Science

(IJAETMAS)” Volume 2, Issue 2, and February 2015 Edition. (Best paper of the journal month of February).

(4) “Collision Avoidance System of an UAV” published in “International Journal of Application or Innovation in Engineering & Management (IJAIEM)”- Volume 4, Issue 2, February 2015 Edition.

(5) Technical paper “Navigation of UAV without GPS” Published in IEEE International Conference on RACE (Robotics, Automation, Control and Embedded Systems), February 2015.

Knowledge in:

Application and Operation of Aircraft and its components; Comprehensive knowledge of aircraft control testing procedure, operation and maintenance of aircraft systems and sub- systems; hydraulic and pneumatic systems; mechanical surface controls; heating and cooling systems.

Familiar with the Federal Aviation Administration rules and regulations and well versed with Civil Aviation Regulations (CAR).

Designing aerodynamic structure of both aircraft and spacecraft and its analysis. Comprehensive knowledge of mathematical skills and Maintain, overhaul aircrafts, including inspections, testing, repairs and installation of engine system and components.

Avionics systems & its Architecture, Avionics system assessment & validation, Display technology trends and modular avionics packing.

Familiar with UAV system design & Structure design and Telemetry tracking navigation system; INS, way point navigation and vision based navigation (SLAM & OPTICAL FLOW).

Procedure about in airframe maintenance and repair, aero engine maintenance. 4

Helicopter maintenance and Aircraft ground handling Procedures and knowledge of producing and designing quality standards to achieve customer satisfaction. Extracurricular Activities:

National Service Scheme (NSS).

National Scouts and Guides (NSG).

Winner in shuttle-cock zonal matches in school level tournament. PERSONAL DETAILS:

Date of Birth : 25

th

July 1990.

Place of Birth : Abu Dhabi, U.A.E.

Marital Status : Married.

Sex : Male.

Languages Known : English & Tamil.

Home: 43, Big Mosque Street,

Kamuthi – Post, Ramnad – District,

Tamil Nadu, India.

Telephone (Residence) : 04576 – 223 278.

Contact Telephones : 050-******* (Brother); 050-******* PASSPORT PARTICULARS:

Passport No : S8103393.

Date of Issue : 19

th

December, 2018.

Dare of Expiry : 18

th

December, 2028.

Issued at : Madurai.

Contact this candidate