AARON

WEBER

863-***-****

adj4z4@r.postjobfree.com

Lakeland, FL 33813

SUMMARY

Skilled and detail-oriented Foreman / Sheet Metal Mechanic with strong background fabricating and installing HVAC sheet metal components and systems. Reviews orders, specifications and applicable codes to create safe, durable structures . Works effectively alone or with team members to meet continuous work demands .

SKILLS

People skills

Multitasking

Flexible

Planning

Skills • Certified plumber (10+ years) • Waste water maintenance experience (10+ years) • 6G certification in welding (10+ years) • HVAC master and all area Sheetmetal fabrication layout (10+ years) • Gas and diesel mechanic (10+ years) • Mechanic Experience (10+ years) • Welding (10+ years) • Blueprint Reading (10+ years) • Equipment Repair (10+ years) • Automotive Repair (10+ years) • Hydraulics (10+ years) • Brake Repair • Facilities Maintenance (8 years) • Laboratory Experience (3 years) • Transmissions • Automotive Diagnostics (10+ years) • Mechanical Knowledge (10+ years) • Oil Change • Programmable Logic Controllers • Low Voltage (6 years) • Lawn Care • Suspension • Electrical Experience (10+ years) • Troubleshooting (10+ years) • Carpentry (10+ years) • Data entry (10+ years) • Supervising experience (6 years) • Laboratory procedures (3 years) • Microsoft Project

EXPERIENCE WATER/WASTEWATER

Operations Manager CONSTA Winter Haven, FL Nov 2016-Current

Water / Wastewater Treatment Management/OPERATER

Operating and maintaining day to day operations in many different variations of waste water Applications such as different sizes GPD to 1.5 MGD processed and treated along with different treatment methods, Extended Aeration,contact stabilization and trickling media activated sludge Facilities. Pretty much head to tail in The waste water collection process from gravity feed lines to lift stations, all different pumps sizes and horsepower from single to three phase positive displacement Forced Main-piping applications including check valves, metering devices Venturi in-line meters etc. Grit chambers, bar screens, grinders and other screening device at the influent Entering the head of the plant or facility. I’m very hands on And knowledgeable on a wide range of mechanical equipment involved, very familiar with dewatering devices, fan press, polymer injection systems and drying beds . 8+ years aerobic digester and around 2 1/2 years anaerobic digester Very versatile in operating all waste water facilities In compliance with in permit guidelines And codes installed, sanctioned and upheld by the governed agency of environmental protection ( DEP) along with many different water facility applications, very familiar with I’ll kinds of Disinfection processes, CL2 injection systems From handling gas chlorine systems and proper set up from single tank to multiple tank Systems. setting up and design manifold systems proper placement of scales and etc. all in compliance With facilities permit and equipment regulations and codes. experience in rebuilding gas diaphragm regulators, vacuum gauges, pulsafeeder degas and conventional heads, and stinner pumps on your smaller chlorine systems also 2 1/2 years UV disinfection experience . Low/high voltage controls to mechanical. (all kinds of pumps Horse power, variety of sizes to pump manufacturers, different applications for different kind of liquid handling capacities All kinds of different collection systems from small seasonal RV parks to city and county utilities I will explain all certifications, experience Qualifications, all State of Florida licenses up-to-date OSHA safety certifications along with confined space entry certified four years consecutive expiration spring of 2022 Will answer all and any questions at time of interview I have experience as a HVAC contractor back in the 90s I decided to take a whole different career change getting into the water wastewater field I guess I find it real appealing to maybe give back alittle bit of something we all take for granted for the most part and there’s a big future in our environment and what we do with It truly look forward to talking to you I hope you feel the same! Note: I don’t need another job I have one I’m looking for a home somewhere where I can grow my abilities Thanks Aaron Weber

CERTIFICATIONS

Certified / WELDER 6G, PLUMBER, [ SOUTH SEMINOLE SYHEET METAL ] - 1998

Water/wastewater dual " C " License - 2014

Confine Space Entry certified up to date 5yrs

WATER /Wastewater Treatment Plant Operator STATE OF FLORIDA Starke, FL May 2013-Oct 2016

Supervised shift work periodically to support upper management, created and assigned work orders and monitored overall plant operation.

Sampled and tested wastewater, applied chemical dosing, received chemical shipments and performed wastewater plant preventive maintenance and minor corrective maintenance.

Operated, monitored, maintained and performed troubleshooting for wastewater treatment facility mechanical and electrical systems.

Analyzed sewage composition and clean water quality and periodically inspected chemical bulk storage tank levels, leakage warning systems and spill containment devices.

Prepared field reports and performed process control analysis and verified compliance with local, state and federal operating regulations.

Loaded sludge vessels and barges, operated plant vehicles and radiotelephones, performed rigging and hoisting and operated welding and burning equipment.

Handled chlorine offloading, cleaned wastewater collection, treatment and reclamation-related equipment and facilities and performed periodic building maintenance.

Performed watch duties and maintenance for plant chlorination equipment, centrifuges, heat exchanger equipment, boilers, valves, pipes and meters.

Maintained appropriate levels using the SCADA system.

Monitored meters and gauges to determine load requirements and detect malfunctions.

Used forklifts, pumping equipment and air compressors frequently.

Sheet Metal Fabricator TROPICAL A/C WINTERHAVEN, FL Feb 2009-Nov 2012

Resolved team member concerns and problems while facilitating solutions and forwarding complex matters to higher authorities.

Assessed, optimized and elevated operations to target current and expected demands.

Supervised, trained and evaluated over 25 employees in HVAC industry.

Repaired sheet metal deficiencies in ducts, drainpipes and control boxes to improve components' structural integrity.

Followed Occupational Safety and Health Administration (OSHA) regulations to promote safe work environment.

Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.

Referred to manuals, blueprints and drawings to obtain accurate information for sheet metal project completion.

Maintained and regularly inspected fabricating machines, hydraulic press brakes and HVAC equipment.

Fastened seams and joints together to assemble components into sheet metal products.

Computed labor and materials expenses to correctly estimate work costs for customers.

Sheet Metal Mechanic/General Foreman EXPRESS METALS Largo, FL Jul 2005-Sep 2008

Collaborated with staff to maximize customer satisfaction, streamline procedures and improve bottom-line profitability.

Delegated tasks to multiple employees while maintaining efficient workplace.

Improved processes by identifying slow-downs and collaborating with LEAD MECHANICS to resolve.

Read and interpreted work order specifications and information to plan, schedule and carry out jobs effectively.

Identified source of equipment malfunctions by using various troubleshooting methods.

Built and installed complete CHILLED WATER systems according to BUILDING CODE standards and customer specifications.

Achieved maximum efficiency by working with large crews to install ductwork in existing and new builds.

javascript:void(0)javascript:void(0)

Sheet Metal Mechanic South Seminole Sheet Metal Inc. Apopka, FL Feb 2004-Mar 2007

Fabricated and adjusted component parts with shop and on-site tools.

Fabricated and altered parts with metal hammers, punches, drills and shears.

Interpreted blueprints and schematics to determine duct placement.

Used power tools to grind, sand and polish metals, plastics and wood products.

Achieved maximum efficiency by working with large crews to install ductwork in existing and new builds.

Troubleshot problems and to identify root causes of failures.

javascript:void(0)javascript:void(0)

LEAD SHEETMETAL MECHANIC POLK A/C Lakeland, FL Aug 200-Nov 2003

I worked on a lot of special mechanical rooms lots of metal coming in all direction entering small room had to make it happen.

Analyzed all required blueprints, drawings, work orders and sketches to correctly fabricate and install products and parts.

Fabricated and layout metal in shop

Installed, altered and repaired sheet metal products and equipment, including ducts and hoods for HVAC systems.

javascript:void(0)javascript:void(0)

Sheetmetal Mechanic MCC mechanical Tampa, FL May 1996-Jun 2000 Sheet metal mechanic MCC Aug 1996 - Apr 1998

MCC at this time was the largest mechanical contractor in the Southeast they picked up a contract with 127 office buildings throughout the Southeast these range anywhere from 5 to 25 storiy high after the first month they gave me lead sheet metal mechanic four months later I was Foreman on that job for finish and starting three more two in Orlando, one in Tampa This went on for the next five years on and off as work came and went with them completed five in Tampa off Fletcher and I 75 And three over in Orlando off of lake Mary exit here I learned how sheet metal ductwork exhaust systems fresh air make up all made the big picture work loop system VAV. run outs going into linear diffuser system All kinds of mechanical split systems: chilled water, freon gas, ammonia systems different sizes and kinds of package units and P text units wall hung‘s you name it I’ve installed it and duct it in from TDC duct mate slip and drive spiral pipe duel wall spiral snap lock the list goes on

javascript:void(0)

Education

javascript:void(0)javascript:void(0)

Associate of Science: WATER/WASTEWATER California State University - Bakersfield Bakersfield, CA Expected in Jan 2012

javascript:void(0)javascript:void(0)

High School Diploma Traviss Technical College Lakeland, FL Expected in May 1992

javascript:void(0)

Certifications

Certified / WELDER 6G, PLUMBER, [ SOUTH SEMINOLE SYHEET METAL ] - 1998

Water/wastewater dual " C " License – 2014 to current

Contact this candidate