Inspector Piping
Resume:
Contact Information
Trichy, Tamilnadu, India – **0102.
adj3es@r.postjobfree.com adj3es@r.postjobfree.com
Personal Profile
Nationality : Indian
Gender : Male
Status :Single
Languages: English, Hindi
Holding valid Indian Driving license.
Permanent Address
Vasan City,
Somarrasanpattai, Trichy District, Tamilnadu, India
Pin: 620102
Amsaraj TR
QC Welding Inspector (ARAMCO Approved)
Career Objective
Seeking a position in areputed organization to utilize my skills and abilities where the competitive nature of the job provides goodopportunity of learning and enhancing my knowledge to be able to satisfy my creative instinct by working towards the profit of the organization.
Educational Qualifications
QUALIFICATION
UNIVERSITY \ BOARD
COLLEGE \ SCHOOL
Diploma in Mechanical Engineering
Anna University
M.A.R. Polytechnic College
Approvals
SAUDI ARAMCO – QC Welding Inspector
Khonani / Saudi Aramco (KICL)
Sadara Chemical Company & Solvay
Summary of Work Experience (7.3 Years)
AWS-Certified Welding Inspector, With Seven years and three months (7.3) of Work Experience in Oil& Gas plants, Welding, NDTInspection in Petro Chemical and Chemical Plant and Measuring of Fabricated Items, Manufacturing &Erection Inspection of Structure, Pipeline, Piping spools, Pressure Vessel, Flare-Tip, Base plate’s, Super heater coils, Panel coil, Superheater header, Skid’s, Duct’s, Pressure Equipment, Structural Steel& Heat exchanger.
Training & Certification
Certified Welding Inspector AWS-CWI (Certificate Number # 14071711)
ASNT –Level- II in RT, MT, UT, & PT.
Welding technology for fresh engineers (IWS EC 026)
Welding inspectors course (IWS WI 012)
Computer Skills
AutoCAD
MS. Office
Work Experience
I.ABDULLAH H. AL SHUWAYER SONS COMPANY
Period: May 2015 to Oct 2019
Major Project:
i.Project :Out Side Shop Supports (Maintenance)
Client :Sadara Chemical Company & Solvay Saudi Services
Job Title :Welding and Piping Inspector(Shop Inspector)
ReceivingandInspectionofallpiping&Structuralrelatedmaterialsasperthecorrespondingvendor documents, MTC’s,MTO&Drawings.
Inspection of fabricationofpipingspools&StructuralmembersaspertheapprovedIFC’s.
Ensuring thematerialsarebeingstoredandpreservedasperthestandardrequirements.
Issuance & releasing of piping & structural components for various construction activities and preparation of final shipment to site.
Inspection of weld joint preparation, dimensional verification, joint fit-up & alignment.
Preparation & review of weld database summary.
Conducting hydrostatic testing of piping spools followed by its lay-up activities.
Prepare inspection checklists & test reports for the client inspection department review & approval.
Witness and verification of the quality of water that is to be used for hydrotest.
Interpretation of drawing & guiding the construction team to execute the work.
Ensure that all Special Process Procedures are validated and performed within the established parameters.
Radiography film interoperating, witnessing DPI and MPI of weld joint.
Witnessing the blasting, primer, mid-coat, top-coat, chloride test, blotter test, mixing ration, wet-film thickness (WFT), and dry film thickness (DFT) inspection as per the project specification.
ii.Project :Fabrication the Skids for the Pumps.
Client : ITT – Saudi Company Ltd.
Job Title :Welding Inspector QA/QC
ReceivingandInspectionofallStructural relatedmaterialsasperthecorrespondingMTC,MTO, Drawings and Purchase order (PO).
Prepare Material inspectionreportandto compare thespecificationwith thematerialrequisition& project requirements.
Conductinspectionsas per the Inspection Test Plans (ITP).
Interpretation of drawing & guiding the construction team to execute the work.
To make sure all construction activities are executed as per the approved drawings.
Conducted marking and cutting inspection and verifying the edge preparation and per the WPS or approved drawing & Final Fit-up or assembly inspection for the base plates as per isometric drawing.
Witnessing NDT activities for the lifting legs & Connecting Supports.
Raising & closing of RFI through Project Management Team(PMT).
Preparation of documentsandtoconduct inspection activities as perschedule.
Preparing final inspection release note for dispatch and get approval from client.
iii.Project : Construction of Piping Spools for Villas at Rastanura&Dhahran
Client : Khonaini International Company Ltd. (Saudi Aramco)
Job Title :Welding and Piping Inspector
Carrying out receiving inspection of materials as per the Drawing & MTO requirements corresponding to its Material Test Certificates with applicable code and standards.
To Prepare the material traceability reports as per the project specifications and release the material for fabrication.
Preparation of Test Packages, planning & execution of inspection activities.
Conducted marking and cutting inspection and verifying the edge preparation and per the WPS or approved drawing & Final Fit-up or assembly inspection for the piping spools as per isometric drawing.
Inspecting the final dimension and verifying with the drawing to ensure that dimension is within the code tolerance.
Perform the Nondestructive examination as per the project requirements.
Radiography film Interpreting, witnessing DPI & MPI of weld joint.
Preparing the Packages for Hydro tests, approving & releasing for Hydro test.
Inspection of hydrotest equipment’s& instruments
Verification of calibration validities of various pressures testing equipment’s& maintaining its log.
Preparation of inspection checklists & test reports for inspection department concurrence
To ensure that construction activities are progressed as per the IFC drawings.
Conduct weekly QC Toolbox meeting to discuss Quality issues.
iv.Project : D6255-MR-0923-ALL-IFM07-0001-Multi Phase Flow MPFM
Client : Schlumberger (Saudi Aramco)
Job Title :Welding and Piping Inspector (MPFM skids and Piping)
Prepare the material traceability reports as per the project specifications and release the material for fabrication.
Preparation of Welding Procedure Specifications and coordination for procedure and welder performance qualifications.
Conducting marking and cutting inspection and verifying the edge preparation and per the WPS or approved drawing & Final Fit-up or assembly inspection as per isometric drawing.
Conducting welding overlay inspection for the flanges and fittings.
Witnessing the hardness testing for the weld overlay surface and HAZ.
Verifying theweld distraction, weld visual inspection, Lateral offset of branches and connections, axial dimensions, face-to-face, center-to-face dimension, Flange bolt holes, final dimension inspection.
Radiography film Interpreting, witnessing DPI & MPI of weld joint.
Witnessing, checking, monitoring and inspection of Hydrostatic testing for the pipe spools.
Witness the blasting, primer, mid-coat, top-coat, chloride test, blotter test, mixing ratio, wet-film thickness (WFT), and dry film thickness (DFT) inspection as per the project specification
Installation of pipe spools with MPFM skids and Verification of flange face, bolt alignment, flange gap.
Compute bolt torqueing MPFM with pipe spools & guide the bolt torqueing crew for the successful completion of the activity.
Performing the Industrial Factory Acceptance Test (IFAT) Mechanical test.
Conducting final assemble inspection and preparing punch list items as per P & ID and Isometric drawing.
Product Marking, Storage, Protection anddelivery inspection for shipment.
Submitting daily inspection report.
v.Project :Out Side Shop Supports (Maintenance)
Client : Sadara Chemical Company & Solvay Saudi Services
Job Title :Welding and Piping Inspector (Site Inspector)
Conduction site visit inspection for the preparing weld map and hydrostatic arrangements.
Preparing of quality documents. (Inspection Test Plan, Welding procedure specification WPS, Hydro test procedure and painting procedure)
Conducting marking and cutting inspection and verifying the edge preparation and per the WPS or approved drawing & Final Fit-up or assembly inspection as per isometric drawing.
Radiography film Interpreting, witnessing DPI & MPI of weld joint.
Witnessing, checking, monitoring and inspection of Hydrostatic testing for the pipe spools.
Witnessing the blasting, primer, mid-coat, top-coat, chloride test, blotter test, mixing ration, wet-film thickness (WFT), and dry film thickness (DFT) inspection as per the project specification.
Instillation of pipe supports, shoes and guide as per the Isometric drawing.
Conducting final walk through inspection, preparing punch list and updating redline markup drawing as per the site modification.
Preparing the final dossier with all quality reports and get approval for AI inspector and submit to maintenances department(client).
vi.Project : Sulfur pit stream coil and header units
Client : Petrofac (Saudi Aramco)
Job Title :Welding and Piping Inspector
Conducting Material receiving inspection for the project as per approved ISO drawings and preparing material traceability reports with part and unit number.
Preparation of Test Packages, planning & execution of inspection activities.
Conducted marking and cutting inspection and verifying the edge preparation and per the WPS or approved drawing & Final Fit-up or assembly inspection for the piping spools as per isometric drawing.
Inspecting the final dimension and verifying with the drawing to ensure that dimension is within the code tolerance.
Perform the Nondestructive examination as per the project requirements.
Radiography film Interpreting, witnessing DPI & MPI of weld joint.
Preparing the Packages for Hydro tests, approving & releasing for Hydro test.
Witnessing, checking, monitoring and inspection of Hydrostatic testing for the pipe spools.
Product Marking, Storage, Protection and delivery inspection for shipment.
vii.Project : (5) Pipelines Replacement at Berri Field
Client : Dynamic Industries Saudi Arabia Ltd Co. (Saudi Aramco)
Job Title : QC - Lead Welding Inspector
Conducting Material receiving inspection for the welding consumable and material traceability reports and Inspection checklist’s.
Preparation of Procedure Qualification Records and Welding Procedure Specifications and coordination for procedure and welder performance qualifications.
Verifying the welding equipments calibration and preparation of inspection reports and checklist.
Preparing Welder JOB CLEARANCE CARD (JCC) and get approval from clients.
Inspection of weld joint preparation,joint fit-up & alignment and preparing the Inspection reports and checklist..
Verifying the WPS for the fit-up joint’s as pre the line class.
Visual Inspection for the weld joints and preparing the Inspection reports and checklist.
Preparing the stage wise reports and releasing the weld joint for NDT activates.
II.Employer : Mano Fabricators and Construction. Ltd
Position : Quality Control Inspector Piping& Structural
Period : Aug 2012 to Apr-2015
Major Project:
Fabrication 12” header for the steam condenser
Super heater coil for the condenser AVDE
Manual duct for the conveyor belt & covering plate
Structural supports for the haycock & wagon boilers, cylindrical fire-tube boilers, multi-tube boilers, & base supports for upstream boilers.
Fabrication of column for towers, supports, building and platforms.
Structural support for the new KFR location
Personal Skills
Reviewing drawings and preparation of project & technical specifications, method statements for inspection activities, inspection test plan, contract quality plan (CQP), inspection form formats.
Attaining the pre-inspection meeting (PIM) and preparing the minutes of meeting (MOM) as per the project specification.
Review the Sub-contractor’s ITP & and procedure, if any requirement for WQT, PQR Qualification, NDT, Heat Treatment, FBE Coating.
Selection of welding procedure qualification, Pre-qualification of welders as per ASME Sec IX, API 1104, D.1.1, B31.3, and also welding overlay.
Preparing WPS and its supporting PQR (Familiar in welding process).
Good interpersonal skills with ability to work in teams or individually and to motivate and mobilize team members.
Leadership qualities acquired as a result of being a member of various clubs in school and participation in various camps.
Good communication skills.
Declaration
I, Amsaraj T.R, hereby declare that, the above information is true and correct to the best of my knowledge. Any references can be produced upon request.
T.R. Amsaraj
Place : Dammam
Date : 15-JAN-2020
Contact this candidate