Machine Technician

Attention To :

Human Capital Department

Dear Sir/Madam

On this good opportunity, I would like to apply as Caterpillar Mechanic My name is Rustan Bani, 38 years old and male. Experienced As Expert Caterpillar Engine. I would like to have career to expand my experience.

My personality as a hard worker and a fast learner, will bring benefits to your company. I would really appreciate if you could give me the opportunity to work in your company lead. And I attached my resume, which will provide details of my qualifications.

I hope my qualifications and experience as the basis for your consideration and look forward to your reply.

Sincerely yours,

Rustan bani

Attached :

Curriculum Vitae

Curriculum vitae

Personal detail

Name : Rustan Bani

Address : Barana kecamatan bangkala barat kab Jeneponto

Sulawesi selatan

Phone : 085*********

Email : ******.*****@*****.***

Date of birth : South Sulawesi March 02, 1982

Age : 38 year old.

Education : SLTA Sanur 1 Makassar Sourth Sulawesi.

Gender : Male.

Status family : Married

Permanent residence : Indonesia

Skill summary

Hard working and responsible person for instance.

Excellent interpersonal skill.

Excellent organisation skill.

Understanding of the English language.

Motivated and well prepared to meet and adaptation to new and challenging situations.

Good understanding and Analisis 5 Element Condition Monitoring Equipment ( Inspection machine, Electronic data, Fluid analisis, Maintenance history and site Condition.

Good understanding Maintenance strategy, Planning and shedulling,

intelligent maintenance run the tool in use on dealers like Product link and Health integrated data

intelligent running and read the results of laboratory analysis of oil

Good understanding, maintaining, repairing and trouble shooting for most of the Caterpillar product including Off-Highway Truck, Articulated Dump Truck, Track Type Tractors, Motor Graders, Excavator,Engine Cseries, and Multiflo Pump.

Good understanding to Repair and Overhaulled Engine.

Good understang to repair component.

Good understanding Fuel System, Power Train system and Hydraulid System.

Good understanding Engine system, Injection Pump, HEUI, EUI and Common Rail.

Good comprehension of selecting and using caterpillar service literature ( part books and service manuals ) on correct equipment.

Good comprehension of measure tools,various special tools and power tools correctly.

Good comprehension of Service Information System ( SIS ) Caterpillar Product.

Good comprehension to operate CATERPILLAR Electronic Technician tool.

Good comprehension to operate Service Information system ( SIS CAT )

Good understanding to process ordering spare part.

Good understanding to make Sims Report and tear down report correctly

Performance carrying out jacking and blocking of heavy equipment and safely using lifting equipment.

Competent driving and operating of Articulated Dump Truck, Off-Highway Truck, wheel loaders, Track Type Tractors, Motor Graders, Excavator, and light vehicle.

Training History

Training Training provider

GM MOD ( Rules ) Briefing PT Trakindo Utama sangata, East Kalimantan

GM MOD ( Rules ) PT Kaltim Prima Coal sangata.

Basic Mechanic PT Trakindo Utama Training Center Jkt.

First Aid and Fire Safety Training Indonesia, Jakarta

Working at Height for Worker PT Trakindo Utama Sangata, East Kalimantan

Contamination Control PT Trakindo Utama Sangata, East Kalimantan

Job Safety Analizis PT Trakindo Utama sangata, East Kalimantan

Power Tools PT Trakindo Utama Sangata, East Kalimantan

Radio Trunking PT Trakindo Utama Sangata, East Kalimantan

Basic Electric and Electronic System PT Trakindo Utama Sangata, East Kalimantan

Lifting and Slinging Basic PT Kaltim Prima Coal Sangata, East Kalimantan

Lifting and Slinging Advanced PT Kaltim Prima Coal Sangata, East Kalimantan

Basic Hydraulic System PT Trakindo Utama Sengata, East Kalimantan

Basic PowerTrain System PT Trakindo Utama Training center Makasar.

Comp/Diag. and Cat Sofware PT Trakindo Utama Sangata,East Kalimantan

Sims Report PT Trakindo Utama sangata,East Kalimantan

Engine System and Aplication PT Trakindo Utama Training Center Jkt.

Isolation Officer PT Darma Henwa Bengalon.East Kalimantan

Engine Rebuild ( small engine ) PT Trakindo Utama Training center jkt.

3500 ENGINE REBUILD PT Trakindo UtamaTraining Center Cileungsi.

Customer Relations PT Trakindo Utama Sangata.East Kalimantan

OJT SOS Interpreter PT Trakindo EMS Head Office Jakarta

Equipment management awareness PT Trakindo Training center Balikpapan

OJT Machine application and operation PT Trakindo MAO Head Office Jakarta

Equipment management Level 1 PT Trakindo Training center Balikpapan

Condition Monitoring PT Trakindo Training center Cileungsi

SOS interpreter PT Trakindo Training center Balikpapan

Customer Excelent PT Trakindo Training center Balikpapan

Product Link performance

PT Trakindo Training center Balikpapan

Job Details

November 2020 - Present. Expert Cat Engine

PT. Darma Henwa Sourth Kalimantan

. Prepared history Engine before Execute

. Disassemble Engine for all cat Series

. Inspect for identifier Route Cause

. Measure Component for reuse or Not

. Make part list Need for Refair or Rebuild

. Make Defect reporting

. Reasemble component after part Completed

. Troubleshooting Engine Or Machine if Need

. Organize Manpower on Team

. Close lop Maintenance

Juni 2017 - July 2020

Free Line Technician

. Performance PM Shedulled medium Excavator

. Troubleshooting Machine Medium Excavator

. Performance Testing and adjusting

. Give Advice and recomendation about machine condition

. Education Customer related Condition Monitoring Proces

. Troubleshooting mobile light vehicle and Medium mobile truck

. Technical Advisor on Family Company.

January 2015 January 2017 . Analyst Strategy Equipment Management

PT Trakindo HO Nortkal Kalimantan

Customer Support All Customer retail Nortkal Kalimantan

Responsibilities

Monitoring Vision link/ Product Link alert and delivery each Customer

give a recommendation on the alert that occurred at the machine

Monitoring and delivery Periodic Maintenance schedulled Customer

Monitoring utilization Machine for fuel consumption, Idle Time and Working Time

Monitoring SOS result and give advice and Recommendation to Customer

Education Customer related Procedure take sample SOS Oil.

Delivery Traininng SOS Interpreter to Customer

Education Customer related use and benefit Product link Vision link Tools

Create Component and machine condition report

Condition Monitoring 5 Element ( inspection, electronic data, Fluid analisis, Maintenance history and Site condition and make strategy maintenance

Create report Service Accuracy Machine

Create and measure MTTR, MTBS and MTFSAPM Machine

Create and measure Mekanikal and Phisikal availability Machine

Consultatif to Customer

Delivery Training Product Link to Customer.

Delivery Training inspection to Customer.

Delivery Training Service information System ( SIS ) to Customer.

November 2011 December 2014. General Field Technician

PT Trakindo Utama Central Kalimantan

Customer Support PT Emeco and PT Indomuro Kencana.

Responsibilities.

oPerformance Technical analysis level II for Track type Traktor D10T, D10R.

Engine performance test :

Check and Adjust valve lash intake and exhaust.

Performance Injector solenoid test, using Electronic Technician Tool

Performance Cut out Injector test, using Electronic Technician Tool

Performance calibrate sensors using Electronic Technician Tool

Performance speed timing calibration, using Electronic Technician tool

Download and identified active diagnostic code, logged diagnostic code and logged event code.

Test low idle, High idle and Stall Rpm

Test fuel pressure low idle, High idle and Stall Rpm

Test boost pressure low idle, High idle and stall Rpm

Test oil pressngure low idle, high idle and stall Rpm

Test cranckcase pressure low idle, High idle and stall Rpm using Blowby Tool.

Check temperature radiator top and bottom tank, using Infra red Tool.

Check visual amount and colour of smoke at engine start up

Steering clutch and brake performance test :

Test Charging pump pressure

Left and right clutch steering pressure test and adjust

Left and right brake pressure test and adjust

Doing adjustment steering clutch low and high pressure

Transmission performance test :

Test pump pressure

Test lubrication pressure

Test and adjust relief valve pressure

Performance transmission clutch pressure test

Hydraulid Performance test :

Test and adjust accumulator pre-charge pressure

Test and adjust hydraulid pilot supply relief pressure

Test and adjust hydraulid fan pump minimum and high pressure

Test hydraulid fan speed

Test and adjust ATAAC fan speed low idle, high idle and stall

Test and adjust ATAAC fan pressure low idle,high idle and stall

Performance test cylinder drift

Performance test cycle time.

oPerformance Technical analysis lever II Truck 773F, 777D, 785C and 789C

Engine performance test

Check and Adjust valve lash intake and exhaust,Using Valve gauge setting tools group.

Check and Adjust Fuel Injector Dimention using Fuel setting tools group.

Performance Injector solenoid test, using Electronic Technician Tool

Performance Cut out Injector test, using Electronic Technician Tool

Performance calibrate sensors using Electronic Technician Tool

Performance speed timing calibration, using Electronic Technician tool

Download and identified active diagnostic code, logged diagnostic code and logged event code.

Test low idle, High idle and Stall Rpm

Test fuel pressure low idle, High idle and Stall Rpm

Test boost pressure low idle, High idle and stall Rpm

Test left and right exhaust temperature Engine Stall

Test oil pressngure low idle, high idle and stall Rpm

Test cranckcase pressure low idle, High idle and stall Rpm using Blowby Tool.

Check temperature radiator top and bottom tank, using Infra red Tool.

Check visual amount and colour of smoke at engine start up

Hoist, Brake and Torgue Converter performance test

Testing and Adjusting hoist relief high pressure

Circle time high idle

Testing and adjusting parking brake release pressure.

Left and right rear brake cooling at low and high idle rpm.

Testing service brake pressure front califers

Testing service brake pressure rear slack adjuster

Testing retarder pressure rear slack adjuster

Testing rear brake residual pressure

Testing brake holding Rpm

Testing and adjusting Torque converter inlet, outlet and lock up clutch pressure

oRepair Component Engine and Machine.

oDoing complaint from customer.

oSupport Warranty Unit/Machine.

oDoing Plant Component Replace ( PCR Program )

Customer Support PT Leighton and PT Marunda Graha Mineral.

Responsibilities

oRepair engine and machine. Dump Truck 777D, D6R, D8R,D9R,D10T Tractor.,14H and 14M Greaders.

oExcavator 320D,336D, 345D

oPerformance Technical analysis Level I and II.

oTesting and adjusting and troubleshooting

oDoing plant component replace ( PCR Program )

oDoing Complaint from Mining Operation.

Customer Support PT Jhonlin Baratama, PT Global and PT Barito Group

Responsibilities.

oTesting and adjusting and Troubleshooting Articulated Dump Truck 740B, Sykes Pump.Exc 320D and Compactor 533E

oSupport Warranty Machine.

oRepair and make failure analysis.

oPerformance Testing and adjusting.

oTroubleshooting.

Customer Support PT Thiess Contractors Indonesia, PT Tamtama Perkasa and PT BHP Billiton.

Responsibilities.

oRepair Component Engine and Machine Truck 773E,740B,777D,D6R,D8R,D10T,14H,14M,16M Motor Greader.988G Wheel Loaders.

oSupport Warranty Unit/Machine

oDoing Plant Component Replace ( PCR Program )

oPerformance Testing and adjusting

Customer Support PT Asmin Koalindo Tuhup ( AKT )

Responsibilities.

oTroubleshooting Machine.Artculated 740B,,D7R,D9R,.14H and 14M Greader

oPerformance Testing and adjusting.

oRepair Component and machine.

oDoing complaint Customer.

September 2010 Juni 2011 Senior Technician

PT Avocet Bolaang mongondow North Sulawesi

Responsibilities

oImprove repairing damage appliance both for field and also which in workshop.

odoing replacement of component midlife at scheduled machine following unit :

Grader 14M

Excavator Cat 345C and 345D

Multiflow Pump Cat

Engine Drill Tamrock pantera DP 1100

Engine Crusher Telsmit C9 Acert.

Dozer Cat

oPerfomance Testing and adjusting and Troubleshooting.

oRepair and Overhaulled Component

oDoing Complaint from mining operation.

oIncrease Prepentive Maintenance.

oIncrease Available Unit.

June 2009 Agustus 2010 Rebuild Engine - Technician

PT Trakindo Utama Sangata East Kalimantan

Customer Support PT Kaltim Prima Coal and PT Thiess Contractors Indonesia.

Responsibilities

oCleaning procedure on engine component.

oDisassemble and assemble Engine small and Cseries.

o3304.3306.3406.3412.C9.C11,C13,C15.C27 Family.

oInspect and measured component Engine for reuse.

oMake failure analysis report.

oTesting and adjusting on caterpillar Small engine and Cseries at Dyno test Room

oDisassembly and assembly on 3500 Family diesel engine, 3508,3512 and 3516 Family.

oTesting and adjusting on 3500 Family diesel engine at Dyno test Room.

oCompleted engine and send to Customer.

September 2006 june 2009 General Field Technician

PT Trakindo Utama Bengalon East Kalimantan

Customer support PT Darma Henwa and PT Kaltim Prima Coal.

Responsibilities.

oChecking for trouble of the units before the units gets a schedule service

oPrepared and carry out service schedule for 250 hrs, 500 hrs, 1000 hrs and 2000 hrs at the following unit :

Track type traktor D6R, D8R, D9L.D10R, D10T, D11R.

Off-highway truck 773F, 777A, 777D,785B, 785D and 789.

Articulated Dump Truck 740

Graders 12H,16H, 24H, 24 M

Excavators 320C and 320D

Wheel loader 988F

Engine Genset and MultiFlo

Caterpillar Product.

oChecking the safety and capability of units after scheduled service

oCarry out backlog.

operformance technical analysis level 1 and 2 at machine

oTesting and adjusting and Troubleshooting.

ochanging part of engine, power train. Hydraulid, brake and steering

ochanging part of undercarriage

oRemove and install component

oDoing complaint from costumer

oMake sims report and field operation report

Customer Support PT Bukit Makmur and PT Prima Tractors Indonusa.

Responsibilities.

oSupport Warranty and maintenance unit:

Dump Truck 777D and 773F

Articulated dump truck 740

Track tipe Tractors D6R,D8R,D9R,D10R,D10T,D11R and D11N.

Motor Greaders 12H,16H,24H and 24M

oRepair component on machine

oTesting and adjusting and Troubleshooting

oPerformance Technical analysis II

oMonitoring unit for operation.

April 2005 Sept 2006 Rebuild powertrain Comp -General Technician

PT Trakindo Utama Sangata East Kalimantan

Customer Support PT Kaltim Prima Coal and PT Henry walkin Etam ( HWE )

Responsibilities.

oDisassemble and assemble component:

Final Drive Dump Truck, Dozer.motor greader, wheel loader Etc.

Service and parking brake.

Steering brake

Front hub Dump Truck

Circle drive Motor Greader

Control valve

Hydraulid and Transmissin Pump.

Transmission. Dump Truck. Dozer. Motor Greaders

Differential.

Torgue Converter.

oinspection and determine reusability of power train component.

oPerformance testing and adjusting transmission.

oCompleted Report and sent to customer.

May 2004 April 2005 Trainee mechanic

PT Trakindo Utama Training Center Jakarta and Sangata

Responsibilities

oLearn about safety rules of PT Kaltim Prima Coal related to maintenance

oLearn about selecting hand tools, measure tools, special tools and power tools

oLearn about selecting part book and service manual related to actual job

oLearn about pastener and tread lubricant

oLearn about sis Cat literature

oLearn about jacking and blocking procedure

oLearn about tagging and isolation procedure

oLearn about basic engine, power train, hydraulid, and electric

oLearn about sims report and sims ticket.

oDoing service 250 and 500 hrs at engine.

oCompleted report

Contact this candidate