Naga Srikanth. Katari

Cell: +91-994******* Email: adj0dy@r.postjobfree.com

Mechanical engineering professional having 9.5 years of experience in Design & New Product development.

Worked on Aero Galleys & Bulk heads Design & Development Project for BOEING Flights at Phoenix Engineering Technologies HYD.

Worked on Automotive Exhaust system Design Projects for PROTON & VOLVO at Faurecia Emissions Control Technologies, Bengaluru.

Worked on Bombardier Rail Project.

Worked on design of Lower side trim, Ceiling Structure, Sidewall Modules, Underframe-chassis, cab-structure, Stanchions and Hand Rails, Passenger Seating Arrangement for Vancouver & KL metro rail projects.

Worked on Harvesting machines Design & Development Project for CLAAS INDIA PVT LTD, MORINDA

Experienced in using 3D-MODELING CAD software CATIA, SOLID WORKS, CREO & UG-NX.

Working experience of Product Data Management tools (ENOVIA, CITRIX).

Working experience Creation of 3D models and 2D Manufacturing/Assembly/INSTL drawings.

Working experience in Geometric Dimensioning and Tolerance as per ASME Y 14.5M.

EXPERIENCE SUMMARY

Worked in PHOENIX Engineering Technologies LLP, HYD as a Senior engineer II from APR 2018 to July2020.

Worked in FAURECIA EMISSIONS CONTROL TECHNOLOGIES, BENGALURU as a Senior Design engineer on behalf off Zuti Engineering Solutions, Hyderabad from June 2016 to Nov 2017.

Worked in CYIENT INDIA LTD, HYDEARBAD as a Design engineer from SEP 2013 to APR 2016.

Worked in CLAAS INDIA PVT LTD, MORINDA as a Design engineer on behalf of E-mug Technologies Pvt. Ltd, Hyderabad from DEC 2010 to MAY 2012.

Worked in CADD DIMENSIONS PVT LTD, HYD as a Design engineer from SEP 2008 to NOV 2010.

ACADEMIC PROFILE

B.Tech (Mechanical Engineering), From JNTU (H) passed out in June 2008.

PROJECTS:

CLIENT: Boeing

The Boeing Company is an American MNC that designs, manufactures, and sells airplanes, rotorcraft, rockets, satellites, and missiles worldwide. The company also provides leasing and product support services. Boeing is among the largest global aircraft manufacturers

Project Title : CONCEPT & DETAIL DESIGN OF AERO GALLEYS & INTERIORS.

Overview : Worked for a Project which includes Design validation, Cost reduction and standardize the design guide lines for complete galleys

Validate the Galley design quality whether the design meets client-required configuration, Boeing standards & Manufacturability.

Guide and Suggest the design team to use the standard parts & Previous designs to optimize the product design cost

Validate individual parts whether the design meets Boeing standards & Manufacturability.

Validate the Assemblies by performing the clash analysis to meet the D6 Gap requirements.

Performing the necessary modification to meet the D6 requirements & “Zero” clash in assembly.

Preparation and finalization of product deviation (Gap analysis) report.

Interacting with the customer to rectifying the product deviations.

Ensures that project deliverables are met per schedule with FTR commitment.

Preparing the project reports and delivery schedules and reports.

CLIENT: FAURECIA EMISSIONS CONTROL TECHNOLOGIES, BENGALURU

Faurecia is a global leader, providing innovative solutions and qualitative equipment to the automotive industry. Over the last 10 years, Faurecia has contributed to the reduction of pollutant emissions by supplying carmakers with forward-looking solutions in emissions control as well as acoustic treatment, weight reduction and energy heat recovery

OEM: PROTON- Malaysia, VOLVO- France & JLR- France.

Project Title : CONCEPT & DETAIL DESIGN OF EXHAUST HOT END FOR GASOLINE LV ENGINE.

Overview : Worked for a Project which includes concept design and detail design of the complete

Exhaust hot End.

Concept preparation as per the base design by respecting the design guide lines.

Making a concept for Proto type (3D & 2D).

Checking feasibility of final model by interacting with client and making necessary modifications in design so as to meet the requirements.

Finalizing the concept by analyzing the CFD & FEA reports.

Design modification as per analysis report.

Design & finalization of sheet metal stamping components & casting components for exhaust system.

Design finalization of Heat shields as per thermal analysis report.

Finalization & release the 3D & 2D in PDM

Interacting with the customer for finalizing the detail design.

Knowledge ISO standards and GD&T analysis & interpretation,

Interacting with CFT’s and works monitoring.

Preparation and finalization of product deviation (Gap analysis) report.

CLIENT: BOMBARDIER, Kingston

Bombardier is the world’s only manufacturer of planes and trains With 63 production and engineering sites in 26 countries and 19 service centers across the world, Bombardier Transportation is the global leader in the rail industry. Bombardier is headquartered in Montréal, Canada. It covers the full spectrum of rail solutions, ranging from complete trains to sub-systems, maintenance services, system integration and signaling.

Project Title : CONCEPT & DETAIL DESIGN OF LOWER SIDE TRIM FOR RIYADH.

Overview : Worked for a Project concept design and detail design of the complete Lower side trims.

Responsible for Propose the suitable concepts for lower side trim.

Responsible for Material and fasteners selection as per Bombardier standards.

Interacting with the customer for finalizing the detail design.

Development of concept once it is approved. And detail design of the concept.

Knowledge of C & P, DIN standards and GD&T analysis, which are used effectively in locomotive design.

Checking feasibility of final model by interacting with client and making necessary modifications in design so as to meet the requirements.

Interacting with CFT’s and works monitoring.

Raise the TSR forms for new parts and finalization of number of parts per each car.

Preparation of profile drawings, INSTL drawings & BOM.

Project Title : DESIGN AND DEVELOPMENT OF ROLLING STOCK CAR BODY

Overview : Worked for a Project which includes design and development of the complete KULALUMPUR &

VANCOUVER systems (shell, under frame, end cab).

Design and validate various parts of KL & VANCOUR car body components.

Design and validate various parts of roof structure (aluminum), sidewalls and under frame structure.

Design and development of under frame brackets by considering the volume analysts and as per assembly condition

Development of sidewall liners plastic (FRP) in rolling stock which includes additional design changes as per assembly condition minimizing the clashes and air gaps.

Support to Production, Quality.

Selection of hardware to fixing the liners to the sidewalls as per rolling stock standards.

Work on 3D modeling, assembly, drawing by using CAD tools.

GD&T analysis & interpretation.

Verification &finalizing the drawings.

Update project status to project manager.

CLIENT: CIL (Claas India Pvt Ltd), Morinda, Punjab.

CLAAS India Private Ltd. is a wholly-owned subsidiary of CLAAS since 2002. CLAAS India Private Ltd. manufactures compact multi-crop combine harvesters for countries around the world. Since inception CLAAS India is manufacturing combine harvesters suitable for the local harvesting conditions. CLAAS India is certified with the latest International Quality Standards of ISO 9001:2008 and ISO 14001:2004.

Project Title : VEHICLE INTEGRATION PROJECT OF RECTANGULAR BALER MACHINE

Overview : Worked for a Project which includes design and development of the complete Baler Machine.

Leading a team of 4 Engineers to design and validate various parts of a Baler Machine.

Thorough knowledge of various areas of machine (Transmission, Pick up & Baling Mechanism, Housing & Twine Wrapping Mechanism).

Design and development of sheet metal and casting components.

Kinematic model creation for clash and interface analysis.

Responsible for material selection for various components as per CLAAS standards.

Knowledge of DIN standards and GD&T which are used effectively in designing Baler components.

Checking feasibility of final model by interacting with client and making necessary modifications in design so as to meet the requirements.

Responsible for preparation of various documents like Project Status Sheet and work allocation sheet by using Project Management tools like MS office.

Thorough knowledge of various applications of SAP and VPM that is essential for proper execution of project.

Project estimation and work monitoring

ORGANIZATION: CADD DIMENSIONS PVT LTD, HYD

Responsibilities:

Design of sheet metal components.

Design & Development of plastic components

Creation of 3D parametric modeling.

Modeling of casting components.

Solving the issues related to various aggregates in DMU

Conversion from 2d to 3D models.

Preparation of 2D drawings & GD & T analysis.

Quality check of 3D model & 2D drawings.

ACCOMPLISHMENTS

2015 BTECI Engineering Award for Innovation/New Ideas (Awarded in Mar-2016 by Bombardier Inc.)

Associate of the month (Awarded in Dec-2014 by Cyient Ltd.)

Team of the month (Awarded thrice by Cyient Ltd.)

Outstanding team performer (Pat on the Back by Cyient Ltd.)

Computer Skills:

CATIA V5, Solid Works, Cero 2.0, Auto Cad.

PERSONAL PROFILE:

Father’s Name : K.Jalaiah.

Date of Birth : 16th, Aug 1987

Marital Status : Single

Languages Known : English, Telugu and Hind

Nationality : Indian

Permanent Address : Endluru (po),S.N.Padu (MD), Prakasam (DT), A.P.

Declaration: I hereby declare that all the details that have been furnished by me are correct to best of my knowledge and belief.

Date: Signature

Place: (K.NagaSrikanth)

Contact this candidate