MOHAMMED TARIQ SUHAIL

Mobile: +919*********

Mobile KSA: +966*********

E-mail: adiv7i@r.postjobfree.com

Experience

SAAF advanced fabrics Rabigh K.S.A

Duration - from 08 December 2012 and still working in..

Position - Senior Electro mechanical technician

Responsibility - keep the machines in working state maintaining the electrical

and Mechanical parts. Monitoring the status of the machine.

Providing Progress/Status report to the seniors

Co ordination with maintenance and project team.

Troubleshoot the Equipment/Plant within specified time.

Compete preventive maintenance and corrective maintenance

Experience - as follows

Worked from erection to commissioning in SAAF line 3 project in which,

Pulled cables, worked on conduits and cable trays, terminations and

connections of given electrical cabinets and equipments including motors,

drives, control boxes, junction boxes and many more in electrical side.

On mechanical side, installed gearboxes on the equipment, help mechanics

in erection of the complete plant which includes piping, alignments n many

more activities

Installation of light curtain and automatic doors for conveyors, loading docks and for heavy vehicles.

Installation of 40 tons capacity weighing bridge and connections for the same

Installation of screw type chilling units and Air Handling Units including open air condensers and water circulation pumps systems.

Installation and commissioning of fire fighting pumps and controls including jockey pump, heavy duty electric pump and diesel engine pump.

Installation and commissioning of recycling extrusion system at spunbond beams in SAAF

Installation and commissioning of new offline slitter.

Repair of fork trucks. Fork, Clamp and carton type

And many other small projects and modifications

Saudi Arabian Ductile Iron pipe co. ltd. (sadip) K.S.A

Duration - from 10 January 2009 to 30 November 2012

Position - Electrical Technician

Responsibility -Troubleshoot and repair machines in plant. Prepare preventive

maintenance checklists and conduct daily weekly and monthly

preventive maintenance

Experience - as follows.

System Installation and commissioning of new machines in cast iron pipes making plant which includes casting machine #4 and new magnesium treatment machine.

Worked on modification of cement line #2 and Casting machine #1 and #2,

Worked with German Engineers while installing new steel melting plant in

SADIP

Worked on modification of heat treating oven which is used to treat cast iron pipes from 900’c to 1400’c

Worked on modification of varnishing line #2

Completed project of new CNC machine and lathe machines.

Worked on project renovation(modification)of mould welding machine

Worked in erection, commissioning and installations of new over head magnet crane and container lifting crane in SADIP

Worked on new project of iron/steel melting furnace system and related control system with plumbing and hydraulic systems included

Worked on modification of 40 tons capacity Gantry crane at SADIP

Completed installations of firefighting system at switchgear rooms in SADIP

Successfully worked in erection and commissioning of a new plant of core making machine in SADIP

Technical and expert Skills

Hardware networking, Microsoft Office 2003, 2007

Attended training on Siemens simatic manager step7

Attended training on bearing alignments and shaft alignments

Worked with control voltage of 5 volts t0 48 volts ac dc

Worked with medium voltage of 110 VAC to 440 VAC

Can troubleshoot almost any electrical equipment for errors and fault findings, even mechanical including hydraulics and pneumatics, gearboxes and cylinders, etc.

Attended training on bearing alignments and shaft alignments

Attended Siemens basic training for s7-300 and TIA portal

Attended training to operate fork trucks, Man lifters and cranes.

Attended training for Temperature sensors and RTDs

Worked on 70Kv and 128Kv transformers half yearly and yearly maintenance

Worked in Otto Junker switchgears using for steel melting furnaces

Worked in both high power substation 14 Kv and low power substation 2.7Kv

Worked in LPDB & MFDB panels installs and repairs for all types of power

supply As per requirement in plant

Have good knowledge about power factors n capacitor balancing in

Otto Junker Switchgears

Worked on converters and inverters in new patents of Otto Junker

switchgears

Worked on Programmed telemechanique and Siemens PLC’s.

Maintained pneumatic, hydraulic, and mechanical systems.

Wired and programmed variable speed drive like Altivars and Rectivars

Installed and supported serial communications.

Proficient with electrical control systems..

Troubleshot and repaired motor control centers and motor starters.

Worked with single and three phase equipment.

Worked on closed circuit television (cctv) cameras

Worked on weighing machines capacity 2tons to 40 tons

Worked on overhead cranes capacity 5 ton to 24 tons on branded companies

like DEMAG cranes, EASTERN MORRIS cranes and KONE (SAUDI) cranes.

Worked on Siemens master drives

Worked on Siemens plc (simatic manager S7 300)

Have handled installation, testing & commissioning of various Instruments

And equipments new project at RABIGH SAAF line #3

Worked with pneumatic, hydraulic and mechanical systems.

Troubleshoot and repaired plant product and support Equipments.

Wired and programmed variable speed drive systems.

Worked with single and three phase equipments.

Worked with fully automated REICOFIL REIFENHAUSER

Spun bond and melt blown machines.

Worked with ACELLI and EDELMANN completely automated winding

and slitting machines.

Worked with MECHADYNE packing machine

Worked with EREMA machine for material recycling.

And many more..

PROJECTS EXPERIENCE

Have handled installation, testing & commissioning of various Instruments

And equipment new project at RABIGH SAAF line #3

Worked with Italians on new project of Treatment line at Rabigh SAAF plant

Worked with Germans on new melting furnaces project in SADIP till project completes.

EXPERIENCE IN INDIA

United electrical installer’s maintenance Co. Ltd.

Duration - From April 2008 to Dec 2008

Position - Electrician

Responsibility - Monitor spares and new installations of cabinets and cables

KEY ASSETS

Enthusiasm to learn new things and ability to work hard under pressure. (in here, pressure means to save time and money, not mental pressure)

Ability to cope up with any kind of environment

Interpersonal skill logically.

Good Decision making capability and time management.

STRENGTHS

Friendly enthusiastic and tackling of difficult situation.

Excellent Communication Skills gained through extensive interaction with colleagues and seniors .

ACADAMIC PROFILE

Secondary School Certificate (SSC) in 2003

Diploma in refrigeration and air conditioning (HVAC) from 2003 to 2005

Diploma in computer hardware and installations (in spare time)

Vocational course on refrigeration and air conditioning

Training from prolific for Siemens plc automation (basic)

Training from prolific for bearing and shaft alignment.

Training from ASTC for fork truck, overhead cranes and boom lifters.

PERSONAL PROFILE

Name : MOHAMMED TARIQ SUHAIL

Address in India : H.No – 10-2-529, 2nd floor

Humayun Nagar, Mehdipatnam,

Hyderabad, Telangana-500028

Father Name : MOHAMMED SHAFEEQ AHMED

Date of Birth : 28 April 1987

Gender : Male

Languages known : English, Hindi, Urdu, Telugu and

Acceptable Arabic

Marital Status : Married

Religion : Muslim

Nationality : Indian

Hobbies : Reading News paper and video games

Traits : Hard working, Honest, Self Confidence

I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Place:

Date: (MOHAMMED TARIQ SUHAIL)

Hoping that you will provide me a chance to work with your organization and thus offer me an Opportunity to prove my professional abilities.

Contact this candidate