RESUME

**,************* *****,

East Ambikapuram,

Golden Rock Post,

Trichy-620004,

Tamilnadu State, India

Mobile &Whatsapp : 009**********

India : 009***********

Email: adiv5y@r.postjobfree.com

PALANIVEL RAJA

Synopsis

CSWIP 3.1 with ASNT NDT Level II in UT, RT, MT & PT with Diploma in Mechanical Engineering. More than 14 years of experience including 12years worked in abroad QA/QC & Non Destructive Testing.

Personal Information:

Date of Birth : 7th June 1977

Nationality : Indian

Passport Details:

Passport No : Z 3947174

Date of Issue : 09/10/2017

Date of Expiry : 08/10/2027

Qualifications :

CSWIP- 3.1 (Welding Inspection) from TWI,UK ( CERT # 48339 -2)

ASNT Level – II in RT,UT,MT & PT

Diploma in Mechanical Engineering

Inspection & Quality Control:

Welding Procedures and Welder Qualification.

Knowledge in welding process such as SMAW,GMAW,SAW,GTAW &FCAW welding.

Radiographic film Interpertation as per applicable codes.

Thorough knowledge in NDT methods such as UT,RT,MT&PT.

Well conversant with international codes like ASME Sec. IX, Sec.VIII,Sec V

ANSI B 31.3, AWS D1.1& API 650 .

Experience Details :

Jan 2018 To Till : M/S. IREM S.p.A - Kuwait

Position : Welding Inspector

Project : Al-Zour Refinery Project – EPC-059

Owner/Client : Kuwait Intergrated Petrolium Industries Corporation

KIPIC / SAIPEM

Job Description :

Review/Approval of Inspection & Test Plan/s, Quality Control procedures, Method statement/s, Welding Procedures etc.

Monitoring / Witnessing all the Welding, Fabrication & Erection related activities as per client approved Inspection & Test Plans/Quality Control procedures.

Inspection of incoming materials and reviewing test certificate as per code

Inspection of piping materials identification as per isometric drawings.

Witnessing of activities like PQR, Welder’s qualification Tests, Mechanical testing and preparation of PQR records and WQT certificates.

Stage wise inspection before, during and after fabrication.

Review of radiographic films, Witnessing of UT, MPI, DPI, Hardness, PWHT and review of test reports.

Witnessing of Weld repair activities as per client approved WPS.

Line walk and Punch List preparation before Hydro Test

Review of Hydro test packages

Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.

Verification of Reinstatement of Piping systems after completion of all hydro testing activities

Verification Mechanical completion Package.

Liaison with client inspectors for inspections of Hold and Witness Point.

Feb 2016 To Feb 2017 : M/S. Heavy Engineering Industries &Ship Building Co- Kuwait

Position : QA/QC Inspector

Project : GC-30 North Kuwait -Unit Tank Farms

Owner/Client : Kuwait Oil Corporation (KOC) / L &T Pvt Ltd – Kuwait

Jun 2013 To Feb 2014 : M/S. SGS India Pvt Ltd, Mumbai, India

Position : Inspection Engineer

Project : IL & FS Prime Tank Terminal (IPTT) – Phase 1, Fujairah,UAE

Client /Owner : IOT Infrastructure & Energy Services Ltd / IPTF

Gas & Oil Storage Tanks : 16 Nos Vertical Storage Tanks ( Hydraulic

Jacking Up Method )

Jun 2011 To Jan 2013 : M/S. Velath Engineering International FZC - Sharjah

U.A.E.

Position : QA/QC Engineer

Project : Ruwais – 4th NGL Train Structural, Mechanical

Piping Works (East Area) – Abu Dhabi (UAE)

Client /Owner : Target / Petrofac and GS E&C JV / Gasco

Storage Tanks : Fixed Cone Roof Storage Tanks Lifted with Hydraulic

Jacking Up Method

1. 7D-418, Distilled Water Tank (18000mm Dia x 17200mm Height )

2. 7D-451, Contaminated Condenstate Tank (16500mm Dia x 14500mm

Height )

3. 7D-452, Demineralised Water Tank ( 28500mm Dia x 28100mm Height )

4. 7D-456, Condensate Storage Tank ( 28500mm Dia x 28100mm Height )

Job Description :

Inspect Raw materials such as, Shell,Roof, Bottom and Annular plates and roof structures,piping, handrails and tanks all attachments (stairways,wind girder,Anchor chair,Earth lugs and settlement check) as per project specification and as per code API 650 & ASME B31.3 standards.

Conducting Tanks all shell course Horizontal &Vertical joints,fitups,Weld visual inspection as per project approved drawings and approved WPS, stagewise inspection follow up ITP.

Monitoring and checking with welders continuous performances (Preheat,Interpass temperature and follow up WPS)

Carried out Visual inspection for consumable (Paint, Electrode )as per standard .

Conducting and witnessed PWHT inspection as per project specification co ordinate with client .

Witnessed NDT (MT,,PT) for welded joints and review reports.

Monitoring suitable welding consumables and their storage conditions at site usage.

Conducting welder qualifications according to approval of PQR for various materials & welding process.

Conducting dimensional Inspect of all shell course shell plates,and roof plates with client inspection

Dimensional Inspection such as Local Deviation Peaking, Bending and Plumbness as per API 650 and project specification.

Reviewed RT films for tanks all vertical and Horizontal and piping welded joints .

Review and approval of work procedures & QAP.

Conducting WPS, PQR and welder qualification test,based upon project requirements.

Monitoring with total responsibility for fabrication and Erection activity.

Surveillance of the quality control during fabrication and Erection activity.

Carried out Pneumatic test for Nozzles RF Pad and Hardness witness as per API 650 standard.

Conducting and co ordination with client inspection of Vaccum Box Testing for tank Bottom plate Lap joints and Anullar plate joints.

Conducting and co ordination with client stage wise inspection of Oil Chaulk leak penetration test with Shell to Annular Plate initial welds.

Daily inspection activities for fabrication of storage tanks as per API 650 standard.

Conducting and co ordination with Client inspection of tank Hydrostatic test .

Tanks settlement check test and roof air pneumatic leak test for tanks as per code and project specification.

Physical verification of tank completion of Box-up and preparation of punch list.

Preparation of NCR and SOR and follow up.Finally prepare tanks all reports &documents compined with Manufacture Data Record

Company: M/S. Sembawang Marine and Offshore Engg Pvt Ltd,

Singapore. (SMOE)

Position : QA/QC- Inspector

Work Duration: Dec 2003 to Dec 2009

Projects Involved:

Erha Fpso Offshore Platform Nigeria.

Third Transmission Pipeline Project Thailand.

Bohai Phase-II Development Project FPSO - China

CPOC-Phase 1 Development of JDA Block B-17 Fields CPP-Platform

Thailand, Malayasia

Halfdan Phase – IV Development Project Denmark.

Job Description : -

- Confirmation of incoming material against material certificate and client specification

- Qualification of welding procedures according to different client specification/welding codes

(AWS D1.1, ASME IX ) for different material using different welding processes.

- Inspection of edge preparation & fit up inspection activities against fabrication drawings.

- Familiar with Standards and codes like ASME 31.3,ASME Section II

- Ensuring the use of proper WPS and Qualified welders for assigned job.

- Day to day welders audit to control heat input, travel speed and proper use welding consumables.

- Visual inspection of completed joints. Dimensional inspection, release for NDT, PWHT.

- Execution of Hardness test after PWHT

- Interpretation of Radiography films as per client specs/codes and review of NDT and PWHT reports.

- Co-ordination with production department for any repair.

- Prepare weld and material traceability

- Review of test packs and clear all the outstanding items prior to hydrotest

- Preparation of punch list and assign the categories for the outstanding items as per the client specification.

- Release the completed spools for hydrotest and co-ordinate with client and witness the hydrotest.

- Attending System Walkdown with client for punchlist clearing using P&ID for mechanical clearance.

- Preparation and maintaining inspection records as per ISO and client specification requirements. .

- Preparation of re-instatement report and ensure all the punch listed items are closed out.

- Preparation of the final documentation dossier as per client requirements.

Company : M/S.Industrial X-Ray Inspection Company

Chennai

Nature of work : NDT - Inspection using UT,RT, MT & PT

Position : NDT – Technician

Work Duration : Oct 1998 to June 2000

Company : M/s. GB NDT ENGG,Trichy

Nature of work : NDT - Inspection using RT,MT & PT

Position : NDT – Technician

Work Duration : September 2000 to June-2001.

Company : M/s VAKS ENGG CORPORATION, Chennai.

Nature of work : Machine shop Supervising &Quality Control.

Position : Quality Control supervisor.

Work Duration : July 1997 to August 1998

Shutdown Work Experiences

1.Sep 2015 To Oct 2015 : M/S. SGS India Pvt Ltd, Baroda, India

Position : Inspection Engineer

Project : VGO Plant Shutdown Maintenence Job (Essar Oil Pvt Ltd )

Client : Essar Oil & Gas Refinaries Pvt Ltd, Jamnagar,India

2.Mar 2015 To Apr 2015 : M/S. SGS India Pvt Ltd, Baroda, India

Position : Inspection Engineer

Project : DTA-Coker Blowdown 1,2 Plant Shutdown Maintenence Job

Client : Reliance India Pvt Ltd, Jamnagar,India

3.Oct 2014 To Feb 2015 : M/S. TUV-Nord Pvt Ltd, Thailand

Position : Inspection Engineer

Project : J3 – Reliance Jam nagar Gascifire Project, India

Client /Owner : Thai Herrick – Thailand / Reliance – India

4. Mar 2014 To Jun 2014 : M/S. SGS India Pvt Ltd, Mumbai, India

Position : Inspection Engineer

Project : Modified LPG Horton Sphere – 6NOS, IOCL Refinary India

Client /Owner : Fabtech Works / IOCL Mathura Oil & Gas Refinary

5. Company: M/S.Kumaran Structural Pvt Ltd, Trichy- India

Position : QA/QC Inspector

Work Duration: Jan 2010 to Aug 2010

Client : M/S.BHEL India

6.Company : M/S. NDT & Corrosion Control Services K.S.A.

Position : NDT – Inspector

Client : SABIC

Work Duration : April 2003 To July 2003

Job Description :

Inspection of Column, Vessels & Heat Exchanger during the turnaround shutdown of plant

Inspecting the Equipments and piping by visual

Ensuring Observation while Pre cleaning and Post cleaning of the Equipments

Witnessing Hydro test and Pneumatic test In Static Equipments as well as piping.

Coordinating with client/consultants while the inspection is being carried out and offer any clarification is required.

Preparing and maintaining various QC documents and final test packages.

Assures that all joints are exposed for examination during pressure test.

Inspection of gaskets, supports, valves prior to line reinstatement acceptance as per the latest drawing for construction, codes and specification standards.

Review QC procedures, ITP and Quality Plan and assist with establishing acceptable working practices for construction activities.

Monitor delivery of permanent materials and ensure the quality of products / consumables / materials comply with requirements of established Standards & Specifications.

Interpreting and evaluating of NDT Results.

Supervision of Piping Fabrication, Welding, Mechanical and Painting jobs (Construction & Maintenance) in line with Project requirements.

I hereby declare that the above-mentioned reasonable are true to my knowledge.

PLACE:

Kuwait

DATE:

P.RAJA

Contact this candidate