Muhammed Afzal – Heavy Lift &Heavy Transportation Engineer/ Specialist /superintendent 1

Muhammed Afzal.A. L

Heavy Lifting / Rigging & Heavy Transportation Engineer /Specialist / superintendent LEEA- Appointed Person for lifting operation

Mobile: +919********* (India), +974******** (Qatar) Email: adiu3p@r.postjobfree.com

LinkedIn: https://www.linkedin.com/in/afzalnavalarch Objective:

To secure a promising position that meets my competencies, skills, capabilities, Experiences and a good opportunity for growth.

Utilize & expertise skill gained over experience and share with others. Profile:

Extensive onshore and offshore experience on major projects in the Oil & Gas, petrochemical, Construction and Power plant projects, shut-downs and fabrication yards as a Heavy Lifting / Rigging & Transport Engineer / Specialist / superintendent.

Experience in methods installation such as lifting, rigging & transport all stages (from contracts management / engineering / logistics to execution), modules/equipment and construction sequence, experience in multicultural projects with EPCI companies.

A good experience and knowledge in project engineering, design and execution work for, Lifting,Rigging,Heavy Haulage and marine transportation. Have been involved in many Heavy Lift Projects involving over land transportation using multi axle platform trailer and SPMT’s, Load out and marine transport operations using modular trailers and marine spread.

Extensive knowledge and experience in designing and execution of Lifting, Rigging,Transportation, Ballast calculation, sea fastening, jacking& skidding, Manual Lifting ( Load Bearing ) using with Cranimax, Liccon job planning software, Auto CAD tools, Moses, Staaddpro including with method statements / risk analysis / JSA’s..

Prudent in preparation of equipment deployment registers, equipment comparison charts, corporate presentations.

Co-ordinate with marketing to develop the most cost effective technical and commercial offer towards the project requirement. Expertise in making project documents, quotations and tenders.

Conduct the seminars and lifting standards induction. Administers client meetings, site visits& route surveys. Educational Qualification & Conducted Training

Bachelor of Engineering, Civil engineering - Bharath University, India

Naval Architect and Offshore Structural Engineering - Diploma,Tyche Engineering, India

Completed Master class for Heavy Lifting and Heavy Transportation - Euro rigging, Germany

Completed LEEA Appointed Person for Lifting Operation - Lifting Equipment Engineering Association

Completed Master class for SPMT Stability- The Next Step - Euro rigging, Germany Muhammed Afzal – Heavy Lift &Heavy Transportation Engineer/ Specialist /superintendent 2

Completed Advanced Written and Practical Assessment for Lifting Supervisor–BIIS

Completed Advanced Safe Rigging and Slinging Level-1 Course – BIIS

Completed Advanced Safe Rigging and Slinging Course- TUV, UAE

Integrated Management System Internal Auditor, Bureau Veritas UAE

(Based on ISO 19007:2008, ISO 74007:2004 and OHSAS 18001:2007 standards) Computer Proficiency

Autodesk Auto cad & Mechanical cad

Microsoft Office & project

STAAD.Pro V8i

Cranimation V2.40, V3.0 and V4.0.

Liccon Job planner software V5.3, 6.9.

AutoDesk Navis work 3D Model

Moses –Multi Operational Structural Engineering Simulator

Salsa - Load Case Calculation

Prokon

Professional experience

Project Engineer -Heavy lift / Heavy Haulage in AL JABER HEAVY LIFT& TRANSPORT LLC From July-2013 to November – 2017 (4 Year & 5 Months)

Lead Engineer -Heavy lift / Heavy Haulage and Superintendent in BOBB Heavy Equipment From November 2017 to December 2019 ( 2 Year & 1 Month)

Lifting Appointed Person & Superintendent -Heavy lift in Madina Group WLL – SHELL From March 2020 to Present

Work History - Al Jaber Heavy Lift & Transport (July 2013 to November 2017)

CBDC, TAKREER, Ruwais, UAE – Transportation and Lifting of Project Equipment weight range (25.0 Te to 1250.0 Te)– For Samsung Engineeringusing various Cranes (Demag CC 8800-1 Twin, Demag CC 8800, Demag CC 2800-1, Demag CC 2500, Hitachi SCX2800, HitachiSCX 1200& SPMT Trailers)

FERTIL – Removal and Installation of Auxiliary Boiler and Waste heat boiler having weight 125 & 150 Te– for Doosan Babcock Using Demag CC 2500-1

Al Nabooda-Lifting of Dredger main pontoon 284.0 Te by Demag CC 3800-1

ARAMCO Project -Transportation and lifting of CABLE DRUM- Weight 390 Te – for Consolidated contractors company at Mina Zayed, Abu Dhabi UAE Using Demag CC 8800 Muhammed Afzal – Heavy Lift &Heavy Transportation Engineer/ Specialist /superintendent 3

ADGAS Das Island, UAE– Removal and Installation of CONDENSER Weight- 85.0 Te & 60.0 Te– for QCON, Plant 7, Turnaround-2016 Using Demag AC 250-1

LAMPRELL ENERGY LTD Sharjah, UAE - Load Out of RIG SHELF CHAOPHRAYA 122 (7823.9 Te)by Scheuerle SPMT 246 Axle Lines

ADGAS Das Island, UAE– Removal and Installation of Waste Heat Boiler Weight80.0 Te – for Dolphin using Demag AC 250-1

OGASCO -Taweela Gas Compression Project, Installation OF Project Equipment Weight Range from 15 Te to 50 Te Using Various Cranes Such as Demag AC 650, Demag AC 400 & Demag CC 3800-1

G S Engineering –RRW Restoration Project, Removal of Old Equipment Weight range from 10 Te 150 Te for Al Jaber Energyby Demag AC 650 & Demag AC 400

Midfield Terminal Building - Abu Dhabi International Airport, UAE– Lifting of I girder beams and Tub beams– for Gulf Precast Concrete Using Demag CC 2800-1

ADGAS Das Island, UAE Installation of Generator 35.0 Te @ Das Island –for Control & Applications Emiratesby Demag AC 650

ENEC, Nuclear Power Plant Baraka, UAE – Transportation of Project equipment (50 Te to 300 Te) – for Hyundai & Samsung Engineeringby Scheuerle SPMT

ZADCO –Load out of VARIOUS PROJECT EQUIPMENTS (25 Te to 230 Te) - for NPCCat Mussafah, UAE By Scheuerle SPMT

RAK AL KHAIMA GAS PLANT–Load out of NEW SLUG LIQUID VESSEL (146 Te)- for HESCO at Rak Al Khaima, UAE By Cometto Conventional Trailer

ADGAS Das Island, UAE – Installation of CONDENSER 45.0 Te in Das Island, UAE –for Descon Engineeringby Scheuerle SPMT 10 Axle Lines

ADGAS Das Island, UAE– Removal and Installation of TRANSFORMER 45.0 Te @ Das Island –for Control & Applications Emiratesby Scheuerle SPMT 8 Axle Lines

ADMA Project– Weighing and Load out of TA & ABK SUBSTATIONS (210.0 Te & 295.0 Te) –for Specialist Services at Mussafah, UAE Using various equipment such as 50 Te & 100 Te loadcells, Scheuerle SPMT 24 Axle Lines

ZADCO UZ750 Mussafah, UAE–Weighing and Load out of LER & LCR MODULES (520.0 Te & 1070.0 Te)– for Specialist Services by Scheuerle SPMT 72 Axle Lines

LAMPRELL ENERGY LTD Sharjah, UAE-Load out of NDC 6 CANTILEVER (1464.0 Te)by Scheuerle SPMT 56 Axle Lines

NICO INT’L. / TOPAZ ENGINERRINGTransportation of BOSKALIS BARGE (1,250 Te& 1000.0 Te) by Scheuerle SPMT 44 Axle Lines

SARB 3 Denholm yam Yard, UAE – Load out of JACKETS AND PILES (600.0 Te)–for DENHOLM YAM by Scheuerle SPMT 40 Axle Lines

Work History –BOBB Heavy Equipment (November 2017 to December 2019 )

Erection of Steel truss -165 Te & 65 Te by Demag CC 6800 (1250.0 Te) & Demag CC 2800-1 (600 Te) for –world’s Largest Sports Mall, Mirdif-Dubai

Loading of Accommodation modules and Rig Legs Weight 72 & 90.0 for Gulf Marine Services in Zayed Port by Demag CC 2500-1(500.0 Te)

Tailing and Installation of Helipad Weight-85 Te- for Abu Dhabi Ship Building in Zayed Port using Demag CC 2500-1 (500.0 Te)& Liebherr LR 1350 (350.0 Te) Muhammed Afzal – Heavy Lift &Heavy Transportation Engineer/ Specialist /superintendent 4

Dismantling of Placing Boom from 130.0 m height for Dubai Dawn– weight 5.5 Te – using Demag CC 2400-1 (400.0 Te)

Lifting of chiller on 125.0 m for royal advance using Liebherr LTM 1500

Dubai Creek- Installation of Steel Structure for ABM Group by Liebherr LR 1350

Midriff City Centre Extension – Dismantling of Tower Crane Weight – 14 Te for Al Nabooda by Liebherr LTM 1500

Dubai Electricity & Water Authority - Installation of Shunt Reactor weight-27.0 Te-for L&T Dubai, by Liebherr LTM 1500

VOX Cinema Sharjah City center -Installation of chiller- by Liebherr LTM 1250

Expo Link – Lifting of Tunnel Boring Machine by Demag AC 350

Ghantoot Gulf Contracting – Installation of Chiller using Liebheer LTM 1500

Tailing & Installation of Steel Struss for Assent, Dubai-By Demag CC 2500-1 & Hitachi SCX 2500

BOROUGE –3 Turn Around 2019- for EMDAD, Ruwais, UAE -Replacement of condenser and Heat ExchangerUsing Liebherr LTM 1500, Grove GMK 6300 L, Liebherr LTM 1250 & Liebherr LTM 1160

Dismantling of Tower Crane Using LR 1350 – Shapoorji Pallonji

Loading of Vessels – 192.0 Te for Quality International –Fujairah FZETransported By 32 Axle Lines Conventional Trailer Using Liebherr LTM 1500 & Demag AC 350

Loading of Flight Boeing 747 for Bahrain Government- Total Weight – 95.0 Te Transported By 12 Axle LInes Conventional Trailer & lifting by Liebherr LTM 1500 & Liebherr LTM 1160

Installation of Glass Structure - Total Weight – 65.0 Te Lifting by Liebherr LR1350 Work History –Madina Group WLL- For SHELL

Removal and Installation of Control Valves, Relief Valves, Gate Valves, NRV, Exchangers, Bundle Puller,Pipe Spools,Motors, Sub header Beams, Catalyst Bags, Fin Fans Bundles, Actuators,, Spades, Blinds, Exchanger Channel Head, Exchanger Channel Cover,Compressor, Cooler & Silencer, Roof Frames,Inlet & Outlet Structures,Sack Barrow, Rotor Fan, Structural Platforms, Grating,,Pigtails, Boilers by Load Bearing and Crane ( 50.0 Te to 700 Te Cranes)

Transportation, Removal Installation of Convection Modules – 370.0 Te bySPMT 24 Axle Lines and Demag CC 8800-1250.0 Te Capacity)

Personal Details

Full Name : Muhammed Afzal

Date of Birth : 02-03-1990

Religion : Islam

Nationality : Indian, Kerala

Marital Status : Married

Languages known : English, Hindi, Malayalam & Tamil Passport No : T8098370

Passport Expiry Date : 16-07-2029

Skype ID : adiu3p@r.postjobfree.com

Muhammed Afzal – Heavy Lift &Heavy Transportation Engineer/ Specialist /superintendent 5 Declaration

I hereby declare that the statements made in this application are true, complete and correct to the best of my knowledge and belief. I can assure that I will do my best and any task given to me and shall look forward to get associated with your reputation to offer my best services with immense and maximum efficiency.

Place : India Muhammed Afzal

Contact this candidate