C.V PERSONAL DATA

NAME EMADELDIN KAMAL SABRY ATTIA

TITLE ENGINEER

Air Force Aviation Calibration

Military Mechanical Industrial Avionics

Colonel

DATE OF BIRTH 15-01-1972

NATIONALITY EGYPTIAN

ADDRESS Al Heerah Suburb AL Mirgab - Sharjah - U.A.E. MOBILE NO.

+971*********

E.mail

adit7j@r.postjobfree.com

adit7j@r.postjobfree.com

LinkedIn https://www.linkedin.com/in/emad-sabry-7a011b74/ Passport No. A25852314

Country Code EGY

Date of Issue 03/10/2020

Date of Expiry 02/10/2027

EDUCATIONAL DATA

1- Benha University, Faculty Of Engineering At Shoubra, Egypt, Bachelor of Industrial Engineering (B.SC..), (Mechanical Engineering ) (good)(B-). Strategic Objectives of the Program:

The discipline of industrial engineering is requested in the fields of operating and assembly. This discipline based on the following fields:

- Manufacturing, Assembly, and Production Systems Engineering.

- Inspection and Quality Systems Engineering.

- Projects Engineering.

- Maintenance Systems Engineering.

- Costs Systems and Feasibility Studies Engineering.

- Study of Correlation between Human Factors and Production Processes.

- Computer Applications Engineering in Various Industrial Fields.

- Occupational Safety and Health Systems Engineering.

- Systems Engineering.

2- The Technical Institute Of The Armed Forces - EGYPT Bachelor Of Aviation Electronics & Instruments & Military Studies, (AVIONICS) .

(Very Good).EGYPT.

3- Associate degree In Industrial Electronics And Automatic Control Systems, The Technical and Industrial Institute, Alex., EGYPT. (Very Good). EDUCATIONAL DATA

4- Egyptian Air Force – Department of Aviation Engineers – Training Division For successfully completed:

The Dassault/dornier Alpha Jet Aircraft Electrical Instruments Maintenance Course. 5- Egyptian Air Force – Metrology Engineering & Calibration Center (MECC) For successfully completed:

MECC Training Course Basic Calibration Course.

6- Egyptian Air Force – Metrology Engineering & Calibration Center (MECC) For successfully completed:

MECC Training Course On Job Training Calibration Course. (O.J.T). Successfully Completed The Calibration Course Skill (5) – (7) Levels Course. Due To The Specialty Training Standards (S.T.S) AFTO Form 797.(us Navy). 11- The American University In Cairo – Engineering and science services (ESS) Successfully completing:

CP Professional certificate in Engineering Management :

- PRMG-060 Quality Engineering.

- PCEM-004 Leadership & Organizational Management and Engineering management.

- PCEM-002 Operational Supply Chain & System Engineering.

- PCEM-003 Engineering management & Project management. 7- Arab Republic Of Egypt, Ministry Of Defense, Egyptian Air Force, Air War Institute Successfully completing:

The High-end Course Of The Military Band Battalions Leaders For Aviation Engineers (very Good). 8- Arab Republic Of Egypt, Ministry Of Defense, Egyptian Air Force, Air War Institute Successfully completing:

The High-end Course Of The Military Band Company Leaders For Aviation Engineers (very Good). 9- Misr development computer, Egypt.

Successfully completing:

The Study Of Maintenance & Repair Of Computer Equipments. 10- The Egyptian International Arbitration Center, Egypt. Successfully completing:

The Primary And Specialized Course For The Preparation Of Arabs International Arbitrators In Collaboration With

The Training Center, Studies And Research Of The Council Of Arab Economic Unity. 12- CNC HOUSE TRAINING CENTER

Successfully completing:

AUTODISK ARTCAM 2018 Programing Course.

EXPERIENCES

1. Colonel - Production Manager Of Type II Calibration & Metrology Lab. July 2013 - July 2014. Egyptian Air Force.

A Type II service is intended primarily for the calibration and adjustment of test, measurement, and diagnostic equipment for use in such areas as product testing, manufacturing, and servicing. Laboratories providing Type II calibration services are often referred to as test equipment calibration laboratories. Equipment that is calibrated through a Type II service usually constitutes the end of the traceability chain and is generally not used to calibrate other calibration standards. laboratory providing Type II calibration services has the appropriate working standards and calibration systems to calibrate to a specification/tolerance, usually a manufacturer's specification/tolerance or a published standard. This type of calibration is usually called compliance testing and is usually carried out in a suitably controlled and monitored environment. In order for a laboratory to qualify for Type II service, it must have calibrated working standards with known measurement uncertainty. In some cases, the uncertainty in the reference standard is taken as the uncertainty in the entire measurement system. The laboratory then needs to demonstrate that all other influences on the measurement system are negligible. A list of such influences can include: a) non-representative sampling in time; b) personal biases in reading instruments; c) imperfect approximations or assumptions incorporated into the measurement procedure; d) variations in repeat measurements that cannot necessarily be attributed to the instrument under test; e) influences of the environment; and f) inexact values of constants and other parameters used in calculations. The calibration certificate for compliance testing must have a decision rule that describes how measurement uncertainty is accounted for when stating conformity with a specified requirement. The decision rule must be clearly defined, communicated to, and agreed with, the customer. MY JOB TASKS:

Managing & Scheduling the work inside the Calibration laboratory areas such as:

- Electrical Area. - Physical Area. - Microwave Area. - Dimensions Area. - Repair Area.

- Schedule Division. - Quality Control Division.

During the year According with the clients (Test instrument owner) and the calibration laboratory.

- Design and create a plan to control the work, Emphasis on continuous improvement work,

- Determine the problems facing the work and find appropriate solutions to these problems,

- Follow up on continuous training for workers to raise their technical competence,

- Follow up the calibration dates for the standard equipment inside the laboratory Through a pre-prepared plan.

- Continuous updating of the technical documentation for the various calibration processes.

- Manage the technicians working inside the laboratory during the year & focusing on following the approved quality procedures during work. Due to the ISO IEC 17025 instructions.

- Follow up on the continuous documentation of the work carried out inside the laboratory.

- Follow-up to document customer satisfaction forms, documenting customer opinions regarding results of dealing with the laboratory and levels of satisfaction.

- Follow up the environmental conditions inside the calibration laboratory in accordance Due to the ISO IEC 17025 instructions.

- Holding daily, weekly and monthly conferences with workers to discuss and distribute work to workers, discuss the various problems facing workers and find appropriate solutions. EXPERIENCES

2. Major, Calibra on and Metrology Lab. Type IV, P.M.E.L Manager January 2002 - July 2013 (11 years 7 months) Egyp an Air Force. Type IV, calibra on laboratories have been established to apply the calibra on of mechanical and electrical measuring equipment used in the air brigades. This laboratory is considered the first P.M.E.L Type IV calibra on laboratory to be established within the Egyp an Air Force.

And I was honored to par cipate in the process of establishing this laboratory through the direc ves of the Egyp an Avia on Engineers Division, the calibra on branch, where the construc on process was carried out through the rules set out in a book TO 00-20-14 Technical Manual Air Force Metrology And Calibra on Program (US Air Force) where this laboratory was established to apply calibra on periodical opera ons and repair opera ons on the tes ng and measuring devices of one of the Egyp an air brigades. MY JOB TASKS:

Managing & Scheduling the work inside the Calibra on laboratory areas such as:

-Electrical area. - Physical area. - Microwave area.

-Repair area - Schedule Division. - Quality Control Division. Creating an annual calibration plan that includes all the measuring devices within the air brigade, divided according to the name, model, and field of operation of the device, the date of the last calibration, the date of the end of the calibration period, the date of the end of the calibration, the name of the calibration or repair operator, and the number of the technical book used to perform the calibration where a book can be used The calibration of the company producing the aircraft or the calibration book of the company producing the device (it is called the device's commercial book).

And also making a similar annual plan for calibrating and repairing the standard equipment of the calibration laboratory.

Technical and administrative supervision of all calibration and repair operations that take place inside the calibration laboratory.

Creating a quality assurance plan to conduct the quality assurance process for calibration and repair processes that take place on the equipment. Supervising the transportation, delivery and receipt of devices that are calibrated inside the laboratory.

Providing a tight supply chain to provide all the technical needs required for calibration and repair. Follow up the creation of customer satisfaction forms to ensure that the desired goals of the calibration process are reached.

EXPERIENCES

3. Captain, Aircra Avionics Technical Maintenance officer July 1993 - January 2002 (9 years 1 month) Egyp an Air Force. Department of Avia on Engineers The Dassault/Dornier Alpha Jet Aircra (Maintenance Workshop & Flying Line) MY JOB TASKS:

Work in the maintenance and repair of the electrical and electronic devices of the Alphajet Aircra inside the maintenance workshop and on the flight line. Apply all planned and unplanned maintenance procedures for the electrical equipment of the Alphajet aircra .

conduct tes ng opera ons on all electrical equipment through the aircra 's maintenance books, and perform repairs on the aircra 's electrical equipment in the aircra workshop. Carrying out rapid repairs on the electrical equipment of the Alphajet. And that is according to a sophis cated technical work system that applies safety, and interna onal quality measures.

4. ALYOUSEF CNC ROUTER FOR DIGITAL SCULPTURE AND ENGRAVING IN 2D AND 3D Owner, Product Manager July 2018 - October 2020 Cairo, Egypt

-T he use of digital control technology by the router CNC milling machine to produce two- dimensional and three-dimensional materials such as the produc on of wooden furniture and the produc on of wood decora ve materials and the possibility of drilling on the wood to produce double and three-dimensional wooden materials and the possibility of implementa on of flag plates on acrylic materials and also aluminum and copper by 3-D Digital Router C.N.C, (COMPUTER NUMERICAL CONTROL). as well as the possibility of design by the ArtCam program and the Coral Drew program.

SKILLS

- Calibration - CNC Solutions - Engineering QA/QC - Engineering Management - Safety Engineering

- CAD/CAM - Supply Chain - Leadership - Computer Hardware - CorelDraw graphic suite

- Solid works - ArtCam - MS Office - Avionics - Industrial Engineering - Mechanical Engineering. LANGUAGES

Arabic Native Language - English.

Honors & Awards

- Medal January 25, Arab Republic Of Egypt, Ministry Of Defense.

- Medal Of Military Duty From The First Layer, Arab Republic Of Egypt, Ministry Of Defense. Membership in unions and federations

- Egyptian Engineers Syndicate.

- Federation Of Arab Engineers.

CAD/CAM

SOLUTIONS

EGYPTIAN AIR FORCE

METROLOGY ENGINEERING

& CALIBRATION CENTER

Egyptian Engineers Syndicate Federation Of Arab Engineers إتحاد المهندسين العرب

Faculty Of Engineering At Shoubra

EGYPTIAN AIR FORCE

Contact this candidate