I&C

COMMISSIONING ENGINEER

A.DHANASEKARAN

***/*, ****** ***** ***., Thiruverumbur,

Trichy, Tamilnadu, India – 620013

adisod@r.postjobfree.com

: + 91_9944547144

Curriculum Vitae

Personal Information

Nationality : Indian.

Birthdate : 23rd August 1980.

Birthplace : Trichy, India.

Marital status : Married.

Passport : U4394101 valid till 19.10.2030

Indian.

EDUCATION PROFILE

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING from State Board of Technical Education, Perambalur, Tamilnadu in 1999.

DIPLOMA IN QUALITY ENGINEERING from School of Quality management, Bharathidasan University Trichy, Tamilnadu in 2004.

TECHNICAL PROFILE

TECHNICIAN APPRENTICE in Maintenance and service at Bharath Heavy Electrical Ltd., [BHEL].

ELECTRICAL DESIGN& APPLICATION in Hi-Tech Institute for Electrical engineers, Chennai.

PLC WITH SCADA in PLC Programming and Case study at SISI, Chennai.

AUTOCAD in CADD Centre, Trichy.

SPI INTOOLS, PDMS & MICROSTATION in TECHINDEED institute, Chennai.

EMPLOYMENT HISTORY

ESSEN INSTRUMENTATION & ELECTRICALS Worked as Production Engineer in Trichy, Tamilnadu, India. From Feb2000-NOV 2000.

MAN TAKRAF (INDIA) Pvt., Ltd. Worked as Electrical Supervisor in Chennai, Tamilnadu, India. From AUG2002-SEP2004.

AYYAPPA WELDING SERVICE Worked as Service engineer in Trichy, Tamilnadu, India. From OCT2004-MAY2006.

BESTERN CONTROLS ENGINEERING destination as working partner in Coimbatore, Tamilnadu, India. From JULY2006-NOV2010.

EMPLOYMENT HISTORY

DOOSAN HEAVY INDUSTRIES AND CONSTRUCTION destination as DCS Engineer in Cirebon 660MW*1Nos Coal Fired Power Plant, Cirebon, Indonesia. From DEC2010-AUG2012.

DOOSAN HEAVY INDUSTRIES AND CONSTRUCTION destination as DCS Engineer in RPP2 700MW*4Nos OIL Fired Power Plant, Rabigh, Saudi. From NOV2012-DEC2014.

DOOSAN POWER SYSTEM INDIA Pvt., Ltd. destination as Sr.DCS Engineer in Kudgi 800MW*3Nos. Coal Fired Power Plant, Bijapur, Karnataka, India. From APRIL 2015- JUNE 2018.

Karur KCP Pvt., Ltd. destination as I&C Engineer in Pollachi 6MW Cogeneration Power Plant, Coimbatore, Tamilnadu, India. From AUG 2018- SEP 2019 .

RECENT TASK AND RESPONSIBILITIES

Carried out engineering and commissioning activity of Boiler, BOP, Auxboiler, Intake, MSF, DM, FOPH AIR Compressor, CHP, ESP, FGD areas. Rectification and improvements, development of control logics in SPPA-T3000, Emerson (Ovation) and G.E Mark VI at HMI and function diagrams.

Implementing control logics in SPPA-T3000, creating HMI and trend displays, report generation and mapping of I/O’s into HMI. Detail Software Engineering in Open and Close loop controls of all Function area in Boiler and BOP area including Unit Master Control (CMC).

Ensuring the automation and application servers wiring, MFT and Relay cabinets wiring and third party interface modification for commissioning requirements.

Executing commissioning activities like Motor solo tests, Pump load tests, Event interlock tests, Initial firing, Steam blowing, HPLP Bypass alleviating, Turbine rolling and Synchronization, Full Load Test, Load Rejection Test, Run Back Test, Plant Black Out Test(EDG SEQUENCE), Reliability Test and Automatic Plant Start Up & Shutdown Test (APS).

Deftness in Operations, Maintenance, and Process loop modifications in DCS for Power Plant.

implementation of drum level compensation, Steam flow compensation, three element drum level control, Auto combustion system, Furnace draft control, De-super heater Control (Boiler, Turbine control loops).

Supervise DCS Site acceptance tests (SAT), DCS server commissioning and maintenance.

Carried out ESP System Pre and Hot Commissioning activities of transformer rectifier (HVR) units with antiparallel-connected thyristors pair Electronic Controller (EC), Auxiliary Control Panels, Functional and protection Interlocks for Rapping System, Spark Rate system, Collecting &Emitting Electrode system, Ash Hopper Evacuation system and Field Equipment Devices .

Execute loops checks, interlock and function tests with clients, prepare inspection reports.

Revise process logic for boiler based on NFPA-85 code, and for balance of plant (BOP).

Support operation team for steam blowing, start-up, shutdown and abnormal conditions.

Keep track of daily work progress, prepare reports and maintain documentation records.

Performed regular backup of DCS archive data, system recovery, software installation and automatic backup configurations.

Involved in plant routine maintenance, online troubleshooting, calibration of transmitters, control valves, on/off valves (pneumatic and hydraulic), MOV (motor operated valves), part turn actuators, gas turbine valves stroke checks.

Review and update control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart, hook-ups, control philosophies, data sheets, loop wiring diagrams, instrument location drawings, communication lists and cable lists.

Commissioning of hardware modification, networking modification and integration for 3rd party communication of Modbus & OPC communication. Installation and configuration of switches and routers, fibre optic cables, remote I/O system modification, new channel assignment.

Conduct training and presentations for new product releases.

AREA OF SPECIALIZATION

Implementation and Maintenance of System Configuration,

oRedundancy Application Server (Stratus ft4300) and Automation Server (S7-416-HV6)

oCommissioning Application Server Fujitsu PRIMERGY RX200.

oRedundancy Time Server (GPS Master Clock system)

oManagement Proxy engineering

oShutdown and Reboot Handling

oArchive Management: Swap out Handling

oDiagnostic of Network Component Faults in Application & Automation Highway

oHardware Components Diagnosis and Replacement in Failsafe and Non Failsafe environment (Appl.Server, Automation Server, Master Fuel Trip and ET200 IO Module)

oProfibus-DP/PA : Electrical Network Diagnostic

oField Device Diagnostic

oI/O & Process Diagnosis, Replacement and Troubleshooting with Report engineering

oAlarm extension engineering

TECHNOLOGICAL EXPERTISE

Basic and Detail Design of Automation & Control Systems (Process /Power/ Water treatment )

Hands on experience in designing SIL rated PLC based F&G systems, ESD, BMS Systems

Migration Of Control Systems (Control HW / HMI / SCADA / Logic)

Upgradation & Configuration of Software and Hardware for Application server R7 SP3 07.1.11.24/ AS3000 controller / S7 CP443-1.

Firmware upgradation for Scalance & IM and AS3000 Profibus CP card upgradation from NRC to AC.

Patches upgradation for XenServer/EverRun Availability Center/Failsafe Cntrl/Real time Cntrl

OLCS & CLCS Creation / Modification.

Configuration & Commissioning of Router Panel to establishing the Multi Unit concept and Time synchro.

Determining redundancy checks for controllers & assigning respective Peer to Peer connection.

Preparation of Cable lists/ Termination Schedule

DCS Hardware design and System Architecture design

Creation of Measurement scheme/ Loop flow diagrams

HMI Engineering with respect to P&ID Diagrams

System Knowledge : SPPA-T3000 / Ovation / G.E Mark VI / Yokogawa

Executing FAT / SAT.

3rd communication Engineering: Modbus (Serial, TCP), OPC UA / Embedded Server /DCOM, IEC61850, IEC60870, etc.

PROFESSIONAL SUMMARY

Overall 20 years of experience in the field of Construction, Calibration, Testing and commissioning of all kinds of process Instruments & Equipment for power plants. And experience in Electrical and in Quality background.

Rich and insightful experience in automation, worked in Multiple DCS & PLC systems. Application programming skills in different automation programming languages.

Familiar with Ladder diagram, Functional block diagram, Illustration list, Program blocks, Sequential functional charts, Cause and Effect Diagram, P&Ids, Loop drawings, Instrument Specifications, data sheets etc.

DECLARATION

The above furnished details are apropos to me and true to my knowledge.

Place:

Date: (A.DHANASEKARAN)

Contact this candidate