Electrical Engineer

Location:

Batam, Kepulauan Riau, Indonesia

Posted:

December 04, 2020

Contact this candidate

Resume:

Marbella Residence Block G*/** Belian, Batam Kota – Batam Centre, Batam, Kepri – Indonesia. 29464

Phone: +62-813*-****-***, (Indonesian Mobile), E-mail Address: ********.******@*****.*** MARTHIN HENRY HUTAGAOL. B.Eng

Career summary

Graduate from Electrical Engineering Degree School for Engineering of PLN’s Foundation (STT PLN – Jakarta, Indonesia). Experienced in field of electrical & instrument equipment for inspection, installation, supervision, calibration and commissioning in fabrication. I am well known as a team player and have never left a project under bad conditions I have understanding on various Oil and Gas platform such as: Floating Production Unit

(FPU), LNG Condensate Exporting, Installation Subsea Cable (Cable Lay), Gas Compressor Platform, Over Land Conveyor, Ship Drilling, Well Head Platform, E-House Electric at FPSO (Floating Process & Storage Offloading), Platform Utility Module, Platform Living Quarter Module, Central Process Platform (CPP), Drilling Jack Up Rig and Service Jack Up Accommodation also Vessel Supply Boat. I have understanding Electrical & Instrument hook up, Electrical & Instrument support installation, Calibration and testing of electrical & instrument also understanding of review the related instrumentation drawing such as piping and Instrumentation Diagram

(P & ID), Cause & Effect Diagram, Loop Drawing, Tubing Data & Pressure required, Operational Sequence or Removing Orifice, Data Sheet, Type Fitting and selection material as required, ITR’s approval, punch list clearance, SBUM (Standard Basic Unit Man hours),Industry Code & Standard. As an Electrical Commissioning Engineer present have many challenges and it gives a good sense of achievement and job satisfaction to have been a part of team that gets the job done. EDUCATION

ENGINEERING DEGREE for ELECTRICAL ENGINEER (2000 – 2008) SCHOOL for ENGINEERING of PLN’S FOUNDATION (STT - PLN) – JAKARTA – INDONESIA TRAININGS

1. Electrical & Instrument in Hazardous Area (COMP-EX) on August 2017 by JTLimited. Certificate Number 61389 2. Electrical Instrument Equipments in Hazardous Area (ATEX EEHA) on July 2014 by City and Guilds of London Institute – OPITO. Certificate Number 240914/0666-05/076221/HLS74601/M/23/03/79. 3. BOSIET + TSbB on March 2017 by WOOD Group Training Approved by OPITO. 4. Hazard Identification Tools on September 2010 by J. Ray Mc Dermott – Batam. 5. Permit to Work Training on May 2010 by J. Ray Mc Dermott – Batam. 6. Packing MCT – Roxtec in house training on August 2009 by Drydocks World – Graha. 7. Gland installation in house training on October 2009 by Drydocks World – Graha. 8. Electrical & Instrument Inspector on October 2008 by Universal Institute for NDT & Welding Inspection – Batam. Language:

Good in English and Fluent in Indonesia

Employment History :

Premier Oil Natuna Sea.BV December 2019 – Present

Ex Inspector, Remedial Ex Inspection for Anoa FPSO, Anoa Platform, AGX Platform, West Lobe Platform, Gajah Baru CPP and LQ Platform, Naga Platform & Pelikan Platform. Job Summary :

1. Compering equipments JIS 1989 installed with Ex installation on Anoa FPSO, Anoa Platform and West Lobe Platform. 2. Coordinate and organizing the remedial inspection activities installation of electrical and instrument items. 3. Ensure that, quality installation of all electrical / instrument equipment and accessories are complying with the latest project drawings, specifications, manufacturer instruction, safety rule, and good practice. 4. Site surveillance to check and give comments if any finding, according to standard (hook up, P & ID drawing, etc. 5. Completeness of the documentation that has not been issued by the vendors: Ex Registers, Ex Check Sheets. 6. Review of the documentation already supplied by the vendors: Ex Registers, Ex Check Sheets, Ex Certificates, all documentation to be countersign need on a randomized basis. 7. IECEx final inspection as carry over on site.

Bechtel Oversea Corporation November 2017 – June 2019 CompEx certified E&I Inspector, working on BP West Nile Delta, Alexandria - Egypt. Job Summary :

1. Coordinate and organizing the daily inspection activities on equipment receiving and installation of electrical and instrument items. 2. Ensure that, quality installation of all electrical / instrument equipment and accessories are complying with the latest project drawings, specifications, manufacturer instruction, safety rule, and good practice. 3. Site surveillance to check the construction work and give comments if necessary, according to standard (hook up, P & ID drawing, etc.

4. Completeness of the documentation that has not been issued by the vendors: Ex Registers, Ex Check Sheets. 5. Compilation of the Ex Register and associated documentation for the entire scope of Topsides equipment. 6. Review of the documentation already supplied by the vendors: Ex Registers, Ex Check Sheets, Ex Certificates, all documentation to be countersigned on a randomized basis, as defined in the attached letter below, and check of the QAD. 7. IECEx final inspection as carry over on yard, when not completed on vendor's site. Marbella Residence Block G8/01 Belian, Batam Kota – Batam Centre, Batam, Kepri – Indonesia. 29464 Phone: +62-813*-****-***, (Indonesian Mobile), E-mail Address: ********.******@*****.*** Tripatra Engineers and Constructor November 2016 – August 2017 Electrical Commissioning Engineer, working on ENI Indonesia – Floating Production Unit (FPU) Jangkrik Project Job Summary :

1. Preparation of Electrical Pre-commissioning and Commissioning Activities 2. To ensure that all construction equipment and all temporary facilities required for Electrical pre-commissioning and commissioning are provided in good time by the contractor. 3. To ensure that pre-commissioning and commissioning activities are performed by the contractor according to approved procedures and contract requirements, including, as applicable. 4. Provision of necessary pre-commissioning and commissioning spare parts, equipment, tools, instruments and fluids. 5. Commissioning preliminary checks, functional tests, operational tests, database, punch lists, hand-over dossier. 6. Performance of repair work for defective systems and re-testing as required. 7. To ensure that the pre-start-up activities are performed by the contractor according to approved procedures and contract requirements, including supply of operating consumables and first fills, and supply of spare parts. 8. To assists vendor performance such as:

Gas Turbine Generator (GTG) – Solar Turbine

Gas Turbine Compressor (GTC) – GE Electric

Navigation Aids and Foghorns – Orga

Pedestal Crane – Conacrane

UPS Battery System – GE Electric

9. To report on commissioning activities to Commissioning Manager. 10. Pre-start-up Activities

11. Coordination with Project Supervisory Team and Reporting. Tarpon Energy Services Indonesia June 2016 – November 2016 EEHA Certified E&I Inspector, working on ENI Indonesia – Floating Production Unit (FPU) Jangkrik Project Job Summary :

4. Completeness of the documentation that has not been issued by the vendors: Ex Registers, Ex Check Sheets. 5. Compilation of the Ex Register and associated documentation for the entire scope of Topsides equipment. 6. Review of the documentation already supplied by the vendors: Ex Registers, Ex Check Sheets, Ex Certificates, all documentation to be countersigned on a randomized basis, as defined in the attached letter below, and check of the QAD. 7. IECEx final inspection as carry over on yard, when not completed on vendor's site. 8. Prepared to check for ITR Sheet, MC Sheet and Completely all relevant document for Electrical / Instrument. 9. Construction correspondence, Request for Inspection, Document Transmittal, solved problem with the client. 10. Carry out final inspection for compliance and completeness prior to any equipment test. 11. Monitoring & Supervise E & I construction & Installation activity, Punch list Clearance. O’Donnel Griffin (ODG) Indonesia November 2015 – June 2016 Senior Engineer E&I QA/QC, working on DSLNG Condensate Exporting phase II. Luwuk, Central of Sulawesi - Indonesia Job Summary :

1. Review QA/QC documentation and E&I procedures.

2. Elaborating and coordinating the E&I specifications, and codes/standards. 3. Coordination with the field subcontractors for all E&I procedure specifications and procedures qualifications reports. 4. Coordination with the other department (Mechanical, Piping and Structural) during fabrication. 5. Monitoring and control for equipment’s installation and continue energizing of all E&I equipment’s to Pre-Commissioning and Commissioning.

6. Review of the E&I QA/QC reports on a daily basis. 7. Auditing of the approved E&I Inspection.

8. Reviewing the inspection and testing methods and procedures for all E&I inspections 9. Reviewing of the E&I summary reports

10. Control the QA/QC site E&I inspectors

11. Coordinate the issue of nonconformance reports through the site QC manager 12. Prepared of the final handing over documents such as QA/QC documents, Inspection and Testing Reports. Saipem Snamprogetti Saudi Arabia Co.Ltd September 2014 – November 2015 EEHA Certified E&I Inspector, working on Saudi Aramco. Al Wasit Gas Plant Project, Offshore Gulf of Persia – Saudi Arabia. Job Summary :

Marbella Residence Block G8/01 Belian, Batam Kota – Batam Centre, Batam, Kepri – Indonesia. 29464 Phone: +62-813*-****-***, (Indonesian Mobile), E-mail Address: ********.******@*****.*** 1. Coordinate and organizing the daily inspection activities on equipment receiving and installation of electrical items. 2. Prepared & check for all electrical & instrument drawing, standard drawing, material specification and brochure. 3. Ensure that, quality installation of all electrical equipment and accessories are complying with the latest project drawings, specifications, manufacturer instruction, safety rule, and good practice. 4. Check procedure of equipment test obtain the relevant document and manage documents certifying test. 5. Visual inspection and Monitoring of Cable Laying (Sub-Marine Cables) / Umbilical Cables during installation, as per drawing lay out, hook-up drawing, and General Arrangement drawing. 6. Monitoring Control Cable Tensioner during Cable Lay (Sub-Marine Cable) installation or Umbilical Cables. 7. Witness Cable Test Optical Time Domain Reflectometer (OTDR) for cable Telecom / Fiber Optic, Time Domain Reflectometer, Insulation Test and grounding test.

8. Monitoring Post-Lay Trenching Cable by Trencher TM-04 Control Room during Trenching Cable lay installation. 9. Record of all relevant inspection activities and outstanding works. 10. Construction correspondence, Request for Inspection, Document Transmittal, solved problem with the client. 11. Prepared daily, weekly, monthly report to management. 12. Carry out final inspection for compliance and completeness prior to any equipment test. 13. Monitoring & Supervise E & I construction & Installation activity, Punch list Clearance. China Offshore Oil Engineering Company (COOEC) Ses.Ltd January 2014 – August 2014 E&I Commissioning Engineer, working on CNOOC– BANUWATI-K Gas Compressor Platform. Surabaya, Offshore – Indonesia.

Job Summary :

1. Preparation of Electrical & Instrument Pre-commissioning and Commissioning Activities 2. Preparation of Electrical & Instrument Operation Test Procedure (OTP) as per Sub-System and Job Risk Assessment Also Lockout Tag out / LOTO Procedure.

3. To ensure that all construction equipment and all temporary facilities required for Electrical & Instrument pre-commissioning and commissioning are provided in good time by the contractor. 4. To ensure that pre-commissioning and commissioning activities are performed by the contractor according to approved procedures and contract requirements, including, as applicable. 5. Provision of necessary pre-commissioning and commissioning spare parts, equipment, tools, instruments and fluids. 6. Acquisition and maintenance of all pre-commissioning and commissioning documentation and records. 7. Pre-commissioning checklists, test sheets, database, punch lists, dossiers. 8. Commissioning preliminary checks, functional tests, operational tests, database, punch lists, hand-over dossier. 9. Performance of repair work for defective systems and re-testing as required. 10. To participate in the contractor’s work planning meetings as required. 11. Pre-commissioning and commissioning activities performed by the contractor. 12. To ensure that the pre-start-up activities are performed by the contractor according to approved procedures and contract requirements, including supply of operating consumables and first fills, and supply of spare parts. 13. To report on pre-commissioning and commissioning activities to the project manager 14. To prepare data for project reporting

15. Pre-start-up Activities

16. Coordination with Project Supervisory Team and Reporting. SMOE Pte.Ltd – Batam Fabrication Yard March 2013 – December 2013 E&I Commissioning Engineer, working on Premier Oil – Wellhead Platforms Naga and Pelikan. Batam & Offshore Natuna

- Indonesia

Job Summary :

3. To ensure that all construction equipment and all temporary facilities required for Electrical & Instrument pre-commissioning and commissioning are provided in good time by the contractor. 4. To witness Factory Accepted Test (FAT), Final Inspection Equipments and closing punch list activities with Client (Premier Oil) by Vendor such as:

LV Switchboard – Bartech Singapore.

MV Switchboard – B&F UK.

Navigation Aids & Fog Horn – Tide Line Singapore.

Radio & Telecom – Vector Info Tech Singapore.

Helideck Lighting & Windsock – Suplintama Majusemesta Indonesia.

Transformer – Schneider Jakarta.

Normal Distribution Board (NDB) – Cooper Crouse-Hinds, Germany.

MV Switchboard Modification – Schneider Jakarta.

Monitoring Control System (MCS Package) – Yokogawa Singapore. Marbella Residence Block G8/01 Belian, Batam Kota – Batam Centre, Batam, Kepri – Indonesia. 29464 Phone: +62-813*-****-***, (Indonesian Mobile), E-mail Address: ********.******@*****.***

SIS Package – Yokogawa Singapore.

Wellhead Control Panel System – Proserv Batam.

UPS Battery System – Bartech Singapore

5. To ensure that pre-commissioning and commissioning activities are performed by the contractor according to approved procedures and contract requirements, including, as applicable: 6. Provision of necessary pre-commissioning and commissioning spare parts, equipment, tools, instruments and fluids 7. Acquisition and maintenance of all pre-commissioning and commissioning documentation and records. 8. Pre-commissioning checklists, test sheets, database, punch lists, dossiers 9. Commissioning preliminary checks, functional tests, operational tests, database, punch lists, hand-over dossier 10. Performance of repair work for defective systems and re-testing as required. 11. To participate in the contractor’s work planning meetings as required. 12. Pre-commissioning and commissioning activities performed by the contractor. 13. To ensure that the pre-start-up activities are performed by the contractor according to approved procedures and contract requirements, including supply of operating consumables and first fills, and supply of spare parts. 14. To report on pre-commissioning and commissioning activities to the project manager 15. To prepare data for project reporting

16. Pre-start-up Activities

17. Coordination with Project Supervisory Team and Reporting Indokomas Buana Perkasa (Cegelec Co.Ltd) May 2012 – March 2013 Electrical Instrument Coordinator, working on KPC Melawan Crushing Plant & Western OLC, East Kalimantan - Indonesia Job Summary :

Overall responsibility for coordination of Electrical Instrument works. Will take direction from and report to Construction Manager for the entire E&I work status of the project work, also provide technical expertise and guidance to Engineers on the project team, and it responsible for completion of engineering tasks necessary to meet the project requirements. 1. Perform detailed check of the specified scope and engineering requirements of the project. 2. Practice Project Execution Plan including preparing and monitoring project schedule. 3. Reconciles with requirements as spelled as spelled out in purchase order documentation. 4. Assigns tasks to engineer disciplines on project team. 5. Assumes specific tasks on project that are within major field of expertise. 6. Coordinate construction activities with E&I contractor to insure meets schedule. 7. Provide construction manager a single point of contract for construction activities. 8. Monitors communications between project team engineers and client, vendors, and outside engineering contractor. Provides advice and guidance where necessary.

9. Responsible for insuring completion of all aspects of construction associated with the projects, coordinated and lead E&I contractor, E&I material inspection and test certificates reviewing, ITR related supports/preparation to E&I contractor and with client.

10. Actively promote and observe all company policies, employee handbook, and safety and security procedures. 11. Comply with work schedule.

12. Comply with company time keeping policy.

NIPON STEEL Batam – Offshore Service (Indonesia) March 2011 – April 2012 E&I Inspector, working on Total E&P Indonesie. South Mahakam Development Phase 1&2, Batam - Indonesia Job Summary :

1. Coordinate and organizing the daily inspection activities on equipment receiving and installation of electrical and instrument items 2. Liaison with client inspector

3. Prepared & check for all electrical & instrument drawing, standard drawing, material specification and brochure. 4. Inspection to fabrication shop, ensure that size and type of supports fabrication according with approval shop drawing include inspection at installation at field.

5. Ensure that, quality installation of all electrical / instrument equipment and accessories are complying with the latest project drawings, specifications, manufacturer instruction, safety rule, and good practice 6. Check procedure of equipment test obtain the relevant document and manage documents certifying test 7. Inspections for cable trays / ladders include accessories, level and tighten. 8. Site surveillance to check the construction work and give comments if necessary, according to standard (hook up, P & ID drawing, etc)

9. Inspection for cable routing, of Electrical, Instrument, Telecommunication, CCVT, Fire & Gas 10. Inspection termination all cable Instrument & Electrical at equipment and Junction Box Instrument, JB lighting, local control station, Marshaling Cabinet, lighting distribution board, LV Switchboard according with approved termination drawing and single line diagram

11. Inspection tubing routing from Wellhead Control Panel, SSV / Wing Valve, SDV / Master Valve, SCSSV / Down Hole Safety Valve to bulk head of Christmas tree

12. Visual inspection of fittings and installation all equipment of Electrical, Instrument and tubing as per drawing lay out, hook-up drawing, P & I D and General Arrangement drawing

13. Cable test (Continuity test, merger test) for cable Instrument, Electrical and grounding test Marbella Residence Block G8/01 Belian, Batam Kota – Batam Centre, Batam, Kepri – Indonesia. 29464 Phone: +62-813*-****-***, (Indonesian Mobile), E-mail Address: ********.******@*****.*** 14. Instrument Tubing Leak Test

15. Inspection for all Instrument device in calibration, Material specification, Data sheet & Vendor Calibration Data 16. Prepared to check for ITR Sheet, MC Sheet and Completely all relevant document for Electrical / Instrument 17. Record of all relevant inspection activities and outstanding works 18. Construction correspondence, Request for Inspection, Document Transmittal, solved problem with the client 19. Prepared daily, weekly, monthly report to management 20. Carry out final inspection for compliance and completeness prior to any equipment test. 21. Monitoring & Supervise E & I construction & Installation activity 22. Punch list Clearance

J.Ray McDermott Inc, Batam Fabrication Yard April 2010 – March 2011 Instrument & Instrument Technician, working on Chevron Platong Gas II – Thailand (Utility, LQ & CPP Deck). Batam - Indonesia

Job Summary :

Verification confirms that construction and installation of electrical & instrument equipment and cable are physically complete and all inspections, testing and documentation requirement have been completed, this includes equipment and component installation and calibration checks, cable installation and testing. Electrical Scope:

1. Carry out inspection working progress (loop test, continuity check and insulating resistance test) ensure compliance with project specification.

2. Perform field inspection with document standard in accordance drawing layout, P & ID, general arrangement & schematic of cable connection.

3. Perform inspection equipments and utilities such as distribution panel, junction box, battery charger, UPS system, marshaling cabinet, local control panel or unit control panel, duct heater, thermostat & fire dumper, motor operated valve (MOV), navigation aid, all lighting type, emergency diesel generator, gas turbine generator (Taurus-solar turbines), gas turbine compressor, medium voltage switchgear, motor control Centre (MCC).

4. Check and completed job as per specification project of construction process like as gland install, cable tagging / cable marker, routing and dressing cable in line cable tray from source to site, also wiring termination (suitable in spec and hazardous location).

5. Perform for rise up and signed punch list when inspection found not in specification project required. 6. Notification, witness and joint inspection with E & I client inspector. 7. Prepare permit to work (PTW) and lockout take out (LOTO) before commissioning functionally test. 8. Verifies, reviews functional / system test (continuity and insulation test) during commissioning & installation phases include fit up after M.C ITR (Mechanical Compliance / Inspection Test Report) and troubleshoot. 9. Maintenance record and rectifier of all relevant inspection / check activities and outstanding work-balancing progress (checked at data input PIMS-program input management system). 10. Know about international standard NEMA, NEC, IEC, and IEEE. 11. Reporting to Engineer / Superintendent.

Instrument Scope:

1. Instrument Cable checks

2. Instrument installation checks

3. Actuated Valve checks

4. Pressure Safety Relief Valve checks

5. Unit Control panel, System and termination Cabinets Checks 6. Instrument Junction Box Checks

7. Orifice Plate Inspection Checks

8. Instrument Pre Installation Calibration Checks

9. Fire and gas Device Installation checks

10. Fusible Loop Leak Test

11. Impulse Tubing Test

12. Perform Field to face Rack I/O checks

13. Perform a Final Loop function test

Witnessing and verification of instrument installation with Client (Chevron Team) and completed with signature on each of Inspection and Testing Record.

Drydocks World – Graha (Batam – Indonesia) May 2009 – April 2010 Senior E&I QC, working on Master Marine L-205 (Service Jack up Rig Accommodation). Batam - Indonesia Job Summary :

1. Review of electrical drawings, fault finding and corrective action practices as per specification. 2. Electrical site support and inspection.

3. Perform technical evaluation on vendor’s documents. 4. Provide guidance on offshore quality standards for the hull structure during new construction and repair where quality standard not met.

5. Ensure the welding of hull structures to be carried out by qualified welders, according to approved and qualified welding procedures and with welding consumables approved by the classification society. Marbella Residence Block G8/01 Belian, Batam Kota – Batam Centre, Batam, Kepri – Indonesia. 29464 Phone: +62-813*-****-***, (Indonesian Mobile), E-mail Address: ********.******@*****.*** 6. Ensure the work to be carried out in accordance with classification society rules. 7. To confirm all materials used should be manufactured at a works approved by the classification society for the type and grade supplied.

8. Carry out visual inspection for the appearance of weld to confirm the acceptability. 9. Review and confirm drawing and standard requirement. 10. Asses defect as to either repairing or to be accepted. 11. Update progress of production and report to head office. 12. Be continually vigilant with respect to HSE impacts, unsafe acts and conditions. 13. Ensure quality of built up sections and block assembly before joined on slipway. 14. Measure paint thickness and compare with the values in painting scheme. 15. Measure material thickness and compare with values on construction drawings. 16. Ensure the measurement of main dimension; including length, breadth and dept of the body. 17. Trouble shooting with the offshore Technical Dept. in sorting out the problem. 18. Coordination with the Production & QC for the improvement of the fabrications. Drydocks World – Pertama Shipyard (Batam – Indonesia). May 2008 – May 2009 QA/QC Electrical Inspector working on COASTLINE MARINE – OSA GOLHIAT (Hull – 158, Supply Boat) Batam - Indonesia Job Summary :

1. Inspect high & low voltage terminations, splicing, cable pulling operations and substations. 2. Inspect above and below ground electrical installations. 3. Inspect transformer and switch gear.

4. Inspect HVAC, Cable Ladder/Tray

5. Knowledge in MCT (Multi Core Cable Transmission). 6. Write inspection reports, non-compliance reports; prepare and maintain inspection reports. 7. Review inspection waiver requests.

8. Familiarized with subcontractor Quality Plans, ITP’s and procedures. 9. Familiarized with Package specifications and drawings. 10. Establish and maintain a good working relationship with the Subcontractors’ management and QA representatives. 11. Be continually vigilant with respect to HSE impacts, unsafe acts and conditions. 12. Inspection of electrical installation switchgear and MCC’s, transformers, UPS systems & motors and Lighting. 13. Electrical site support and inspection

14. Updating work progress to coordinator

15. Review of electrical drawings, fault finding and corrective action practices 16. Prepare as built drawing (AutoCAD) and documentation (Ms. Word and Excel) PT. INDONESIA POWER (UNIT OF POWER PLANT BUSINESS) June 2006 – June 2007 Assistant Electrical Technician working on MRICA, BANJAR NEGARA – CENTRAL OF JAVA INDONESIA Job Summary :

1. Ability for electrical power distribution and interconnection 150 Kv 2. Responsibility for activities maintenance (daily, weekly, monthly) of spillway 3. Responsibility for activities maintenance (daily, weekly, monthly) of power transformers & distribution transformers 4. Responsibility for activities maintenance (daily, weekly, monthly) of governor meter at power house 5. Participates actively during doing overhaul generators 6. Participates actively Implements safety procedures and company regulation in the execution, to perform good housekeeping and maintain work area clean during as well as after the completion to promote safe and clean / better working condition. Computer Literature

Microsoft Word, Excel, Power point, Oracle, Auto Cad, Visio. Language

Good in English and Fluent in Indonesia

Expected Salary : Negotiable

Personal Details

Name : Marthin Henry Jeky Hutagaol

Email Address : ********.******@*****.***

Home Address : Marbella Residence Block G8/01, Belian – Batam Centre Phone : +62-813**-****-**, (Indonesia Mobile)

Skype ID : MHenry230379

Age/Birthday/Place of Birth : 41 years/ March 23, 1979/ Kisaran Marital Status : Married

Identity No (Passport) : B 3356427

Date of issue/date of expiry : 05th April 2016 / 05th April 2021 Reference & Recommendation:

Mr. Romonang Hutajulu (QC Coordinator – ENI Indonesia). Mobile Phone +628**********

Mr. Roni Hutajulu (E&I Inspector – ENI Indonesia). Mobile Phone +62-812*-****-**

Contact this candidate