Senior Quality/Welding Engineer
Resume:
RESUME
NARESH BOOPATHI E mail – adic72@r.postjobfree.com
Phone - +91-975*******
CAREER OBJECTIVE:
Self motivated and dynamic aspirant seeking a position in the Quality Control field that allows me to apply my ideas in inspection, design and analysis skills, management and technical capabilities.
Academic Qualification
Degree : Bachelor of Engineering (BE) in Mechatronics
Engineering.
ANNA University, Tamilnadu, India.
Technical Profile
Welding Inspection : CSWIP 3.2.2 & AWS-CWI Certified Welding Inspector
Painting/Coating : NACE CIP Level -1 Certified Inspector
Non Destructive Testing : ASNT Level-II
oRadiography Testing
oUltrasonic Testing
oMagnetic Particle Testing
oLiquid Penetrate Testing
Diploma in Process Piping Design & Engineering per ASME B31.3 from Institute of Piping Engineering Services, Hyderabad.
Certificate in Pipe Designing from Kagira Drawing Solutions, Chennai.
Additional Profile
Computer Skills : Ms-Office, AUTO-CAD
Safety Training : BOSIET (BASIC OFFSHORE SAFETY INDUCTION EMERGENCY INCLUDING EBS & TRAVEL SAFELY BY BOAT-OPITO Approved
Seaman book : Bahamas
Experience Profile
Energetic, proactive professional with a positive work ethic with over 14 Yrs. of experience serving as a Quality Inspector & as Production Engineer. I have worked in onshore and offshore oil, gas and petrochemical industry in India, Brunei, Myanmar, China, Singapore, Qatar & Dubai with leading organizations ● Well versed in welding, NDT and piping inspection with valid certifications ● Familiar with international codes like ASME, API, AWS, ASTM, DNV and ISO requirements ● Adept in working with leading consultants and third party inspectors ● Strong planning, execution and problem solving skills.
MARCH 2019 – PRESENT
Working as Freelance Third Party Inspector representing TUV Rhineland, TUV SUD, DNV GL, BV among other agencies working on Inspection & Expediting activities such as
Inspection of Centrifugal Pumps, Witnessing of Hydrostatic testing of Casing with accessories, Dynamic Balancing of Impeller/Rotor assembly, Mechanical run test, Performance test, NPSH test, Strip test, Vibration, Noise level, Oil temperature rise, Final Assembly, Complete unit run test, witness/Review of NDT, API plans for piping, Visual, Over all dimensional and Paintings per API 610, ISO, BS and IS standards / Customer Specification.
Inspection of Air Dryers for Visual, Dimensional, FAT, NDT witness/review, Final Painting and Packing
Inspection of Screw Air Compressors for visual, dimensional, FAT, final painting and packing.
Inspection and testing of Gate,Globe and Check Valves for visual dimensional, Hydro test,Seat Leak test, NDE, FE & Painting.
Inspection of Control valves for Functional test, Calibration test, Hydro test Seat leak test, FE test, NDT, Dimensional, Welding, Painting, Visual and Packing Inspection.
Witness Pouring, witness Chemical & Mechanical properties,NDT witness/ review, Heat treatment reports review, Visual, Dimensional and for Valve castings and accessories.
Inspection and testing of Gate,Globe and Check Valves for visual dimensional, Hydro test,Seat Leak test, NDE, FE & Painting .
Inspection of Control valves for Functional test, Calibration test, Hydro test Seat leak test, FE test, NDT, Dimensional, Painting, Visual and Packing Inspection.
Inspection of Heat exchangers, Pressure vessels, Fuel gas heaters starting from raw material, fit-up, weld visual, NDT review /witness, Hydro, dimension, blasting and painting.
Qualifying welders based on the approved WPS through Welder Qualification Tests as per Client specification and Codes and Standards (SAES, ASME IX, API 1104, and AWS D1.1).
Having worked on projects representing Clients like ADNOC, ADCO, Al-Ghanim, Kuwait Oil Company, FMC Singapore to name a few.
NOVEMBER 2016 – FEBRUVARY 2019
Working with JRay McDermott Middle East Inc. as Quality Inspector involved with Onshore & Offshore Fabrications & Installations (Saudi Aramco Approved).
Onshore:
Current Project: SAFANIYA 6
Client: Saudi Aramco
Work Description: Ten SFNY Slipover Platforms with Associated Pipelines, Cable & EDP.
Project: 13 STANDARDIZED SSS JACKETS
Client: Saudi Aramco
Work Description: Fabrication of 13 Offshore Jackets in BRRI ZULF & MRJN Field.
Project: SAFANIYA 5
Client: Saudi Aramco
Work Description: Fabrication of Decks & Jackets.
Project: 3 CRPO
Client: Saudi Aramco
Work Description: Fabrication of 3 PDM (Decks & Jackets).
Project: LTA – II
Client: Saudi Aramco
Work Description: Fabrication of SFNY, BRRI, MRJN & ZULF.
Offshore:
Have completed two different pipeline campaigns with McDermott for Offshore Pipeline Installation.
Employer : JRay McDermott Middle East Inc.
Position : Senior QA/QC INSPECTOR (Welding).
Description : 2no.s 16” Pipeline and 2no.s 12” Pipeline.
Client : Saudi Aramco.
LOCATION : Saudi Arabia (BRRI & ZULF location).
Barge/Vessel : DLV 2000.
Employer : JRay McDermott Middle East Inc.
Position : Senior QA/QC INSPECTOR (Welding).
Description : 16” Pipeline and 2no. 12” Pipeline.
Client : Saudi Aramco.
LOCATION : Saudi Arabia (SAFANIYA & BRRI location).
Barge/Vessel : DB 32.
APRIL 2015 – JULY 2016
Working as a Snr.QA/QC and Production Engineer in SapuraKencana TLO Offshore Sdn Bhd., Malaysia.
Employer : SapuraKencana TLO Offshore Sdn Bhd.
Position : SNR QA/QC INSPECTOR
Project : MHSRD (INSTALLATION OF JACKETS, CONDUCTORS & BOAT LANDING)
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
LOCATION : India.
Barge/Vessel : LTS3000
Employer : SapuraKencana TLO Offshore Sdn Bhd.
Position : SNR QA/QC INSPECTOR
Project : ADDITIONAL DEVELOPMENT OF VASAI EAST Project. (INSTALLTION OF 5 PIPELINES & 2 JACKETS INCLUDING TOPSIDES)
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
LOCATION : India.
Barge/Vessel : LTS3000
Employer : SapuraKencana TLO Offshore Sdn Bhd.
Position : QA/QC Supervisor
Project : JDA B-17 & B17-01 PHASE 3 Development Project.
(INSRALLTION OF 3 TOPSIDES MDF APA & TPA)
Client : CARIGALI-PTTEPI OPERATION SDN BHD(CPOC).
LOCATION : Malaysia.
Barge/Vessel : SK1200
Employer : SapuraKencana TLO Offshore Sdn Bhd.
Position : Site Representative / Lead QA/QC Supervisor
Project : Spool Fabrication of DAI HUNG, NAM CON SON2 & NAM CON SON BAI HO project.
Client : PVEP POC, VSP & PVGas Vietnam.
LOCATION : VungTau, Vietnam.
NOV 2014 – FEB 2015
Worked with INTERTEK GLOBAL LIMITED as Lead QA/QC Inspector on call to DIPLOMAT-NCC JV for NGL SUPPORT CAMPUS – Phase1 (Qatar Petroleum) project as QC Lead (MECHANICAL), Qatar.
OCT 2010 - NOV 2014
Worked as a Senior QA/QC Inspector and Project Engineer in SWIBER OFFSHORE CONSTRUCTION PTE LTD, Singapore.
Projects Involved With So Far:
Employer : Swiber offshore Construction Pte Ltd
Project : SU TU NAU FIELD DEVELOPMENT PROJECT
(SPOOL TIE-IN & RISER INSTALLATION PROJECT)
Client : PTSC M&C, Vietnam
BARGE/VESSEL : SWIBER CONQUEST
Employer : Swiber offshore Construction Pte Ltd
Project : SU TU NAU FIELD DEVELOPMENT PROJECT
Client : PTSC M&C, Vietnam
BARGE/VESSEL : SWIBER CONQUEST
Employer : Swiber offshore Construction Pte Ltd
Project : SPOOL TIE-IN & RISER INSTALLATION PROJECT
Client : CONACO PHILIPS, Indonesia
BARGE/VESSEL : SEAMAC PRINCESS
Employer : Swiber offshore Construction Pte Ltd
Project : NAGA PELIKAN PROJECT
(Installation of 2Jackets & Topside - NAGA & PELIKAN)
Client : Pearl Oil, Indonesia
BARGE/VESSEL : SWIBER KAIZEN 4000
Employer : Swiber offshore Construction Pte Ltd
Project : PLATFORM EXTENSION PROJECT
Client : Pearl Oil, Indonesia
BARGE/VESSEL : SWIBER TRIUMPHANT
Employer : Swiber offshore Construction Pte Ltd
Project : CHAMPION WATERFLOOD PROJECT
(Installation of 3Jackets - CPAP-40 CPPP-40 & CPWJ-41)
Client : Brunei Shell Petroleum SDN BHD
BARGE/VESSEL : SWIBER CONQUEST
Employer : Swiber offshore Construction Pte Ltd
Project : CHAMPION WATER FLOOD PROJECT
(Installation of PRP2, Bulan Bulan, PRP and OSPREY Pipelines)
Client : Brunei Shell Petroleum SDN BHD
BARGE/VESSEL : SWIBER CONQUEST
Employer : Swiber offshore Construction Pte Ltd
Project : ZWATIKA Project.(Spool Fabrication Project)
Client : PTTEP, Thailand.
LOCATION : Yangon (On-Shore).
Employer : Swiber offshore Construction Pte Ltd
Project : YADANA SUBSIDENCE Project.
(Installation of Tripod Jacket Structure along with Flare Tower and Bridge)
Client : TOTAL E & P, Myanmar.
BARGE/VESSEL : SWIBER PJW 3000
Employer : Swiber offshore Construction Pte Ltd
Project : CLUSTER 7 Project.(Spool Fabrication and Installation Project)
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
BARGE/VESSEL : KREUZ SUPPORTER
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification For PMEX Project.
Client : Petróleos Mexicanos (PEMEX), Mexico
LOCATION : Singapore
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification For PEARL Project.
Client : Pearl Oil, Indonesia
LOCATION : Singapore
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification For PERTAMINA Project.
Client : Perusahaan Pertambangan Minyak dan Gas Bumi Negara,
(PERTAMINA), Indonesia.
LOCATION : Singapore
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification for ZWATIKA Project.
Client : PTTEP, Thailand
LOCATION : Singapore
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification for YADANA Project.
Client : TOTAL E & P, Myanmar.
LOCATION : Singapore
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification for SISI NUBI Project.
Client : TOTAL E & P, Myanmar.
LOCATION : Singapore
Employer : Swiber offshore Construction Pte Ltd
Project : Spool Fabrication and Installation for B-193 SSPL Field
Development Project.
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
BARGE/VESSEL : KREUZ Supporter
Employer : Swiber offshore Construction Pte Ltd
Project : Process Pipeline Project B-193 Field Development.
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
BARGE/VESSEL : SWIBER CONCORDE
Employer : Swiber offshore Construction Pte Ltd
Project : Sub-Sea Pipeline Project B-193 Field Development.
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
BARGE/VESSEL : SWIBER CONCORDE
Employer : Swiber offshore Construction Pte Ltd
Project : D1 Development Project Installation,
(Installation of 3 WH Jackets, 3WH Platform Decks and One Bridge in D-1 Field Development Project)
Client : ESSAR, INDIA.
BARGE/VESSEL : SWIBER CONCORDE.
Employer : Swiber offshore Construction Pte Ltd
Project : LF 13-2/13-1 Offshore Oil Field Subsea Pipeline Project, Zhujiang Estuary Basin Of South China Sea Field, CHINA
Client : CNOOC, CHINA.
BARGE/VESSEL : SWIBER PJW 3000.
Employer : Swiber offshore Construction Pte Ltd
Project : Procedure Qualification for LF 13-2/13-1 Offshore Oil Field Subsea Pipeline Project,Zhujiang Estuary Basin Of South China Sea Field, CHINA
Client : CNOOC, CHINA.
LOCATION : Singapore.
Employer : Swiber offshore Construction Pte Ltd
Project : MHNRD Redevelopment Phase II
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
LOCATION : Mumbai, INDIA
Employer : Swiber offshore Construction Pte Ltd
Project : AFCON
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
Employer : Swiber offshore Construction Pte Ltd
Project : NORTH TAPTI
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
BARGE/VESSEL : SWIBER CONCORDE
Employer : Swiber offshore Construction Pte Ltd
Project : B-193 Wellhead platform Project.Bassein field, India
(Installation of jackets and Topsides-B178-A, B-23A-A
B-28A-A, B-179-A and B-172-A)
Client : Oil and Natural Gas Corporation Limited. (ONGC), India.
BARGE/VESSEL : SWIBER PJW 3000
May 2006 to OCT 2010
For Venkateshwara industries, COIMBATORE, INDIA
Worked on Part-time from 2006 – 2009 and on Full term basis from 2009 – 2010, As a Quality inspector and Project Engineer for Clients. (Various)
EXPERIENCED IN FOLLOWING ROLES AND RESPONSIBILITIES:
Execute daily inspection and reporting as per approved QCP /ITPs.
Witness the procedure qualification record and welder qualification test compliance with relevant codes, standards and specifications.
Ensure strict compliance with approved WPS and QC procedure in all welding jobs.
Execute the work from Planning until the final finish output as required by client.
Supervise the fabrication activities in relation to fit-up, tack weld, joint surface cleanness. Pre-heat / inter-pass maintenance, adherence of weaving width, heat input and root inspection meets the applicable code specification or standard.
Familiar with the following welding processes: SMAW, GMAW, GTAW, SAW, FCAW.
Check the welding consumables storage, backing and issue control and ensure continuity records for welders.
Check the welding parameters and all essential variables periodically.
Witnessing the repair removal.
Perform visual and dimensional inspections to ensure compliance with codes and standards
Ensure that hardness tests and NDT are in compliance with the relevant codes and Standards.
Witness and report all NDT activities.
Interpret radiographs in accordance with the specified industry codes, standards, and procedures for the work
Check the storage, segregation and preservation of piping material.
Conduct detailed study of isometric drawings, P&ID drawings, and GA diagrams and check material specification
Supervise and control fabrication and erection activities of CS, SS, CUNI and GRE pipes to maintain compliance with contract specification, codes and approved drawings.
Inspect pipe joints, support assemblies and final dimensional inspections as per approved drawings and standards.
Carry out hydro tests and reinstatement line walks, punch list clearance and monitor the flange management.
Witness the flushing, Hydro and pneumatic test, drying, reinstatement, pigging, chemical cleaning are complying with all specification and safety requirements.
Check the pipe anode sequence in submarine pipelines.
Review material certification of project materials thus ensuring that it met all specifications and check that it corresponds to actual material supplied
Review of all QC documents viz ITP,WPS,PQR,WPQ,PWHT,PRESSURE TEST Charts & NDT Reports
Review the Test Packs and generate QC Inspection/ Release reports.
Assist in reviewing projects drawings and specifications for compliance with the standards.
Monitor and ensure compliance with critical control points of the process to achieve planned results.
Ensure valid calibration for all equipment at site.
Ensure proper collation, endorsement and compiling of all quality documentation and inspection reports and retention till completion of project.
Notify non-conformances detected during site inspections and recommend corrective measures.
Provide sufficient feed back to Senior QA/QC Engineers on day to day quality issues.
Implementation of QA/QC activities including those of sub-contractors works in accordance with approved QCP /ITPs and Procedures, method statements and other contract documents
Conduct any quality control investigations on Vendors as deemed necessary or as requested by the QA/QC Coordinator
Report all major Vendors performance and quality deficiencies to the QA/QC Coordinator for resolution
Liaise with customers and external agencies for smooth inspection and progress of project.
Investigate quality related complaints from customers and implement effective corrective and preventive measures.
Co-ordinate with contractors, subcontractors as well as Vendors for work progress drawing modifications field change, change of material
Coordinate with QC inspectors, mechanical supervisors, welding foremen, painting foremen and workshop in-charge to complete all inspections as per project requirements/recommendations
Have been responsible for implanting several changes in the progress planning while working as a Project Engineer to save time, effort & money.
Plans such as Identifying potential clients based on the market for long term financial planning.
Preplanning the engineering & procurement with MOU’s signed with potential client for various potential projects.
Preplanned meeting before the awarding of the project helped save time for engineering & other documents readiness & approval
Involving the Painting & Dispatch team in the half way stage completion meeting helped save time & effort.
PASSPORT DETAILS
Passport number: Z 2838149. Place of issue : Doha.
Date of issue : 04.12.2014. Valid date : 03.12.2024.
PERSONAL DETAILS
Father’s Name : Ramasamy Boopathi.
Date of birth : 25-10-1987.
Marital status : Married.
Nationality : Indian.
Communication Address : 7, Balasubramaniam nagar, Saibaba Colony, Coimbatore,
Tamil Nadu, India-641038.
DRIVING LICENSES : Indian & Qatar (Expired)
DECLARATION
I do here by declare that the information’s above are true to the best of my knowledge.
Place: INDIA
Date: 11/11/20 (Naresh Boopathi)
Contact this candidate