Karishma Ravindra Saravdekar
Email: adib2v@r.postjobfree.com
Phone: +91-879*******
Address: Room no. 12, 3rd floor, Ananta Nagar,
Near Lakshmi Chowk, Hinjewadi, Pune
Maharashtra, India
Synopsis
• An Engineering graduate with more than 6 years of experience in embedded technologies, Aviation, Automotive and Autosar.
• Specialization in Electronics & Communication from Shivaji University, Kolhapur(India)
• Experience in developing working models based on Embedded systems
• Areas of interest include Autosar, Digital Signal Processing, Embedded Systems and Automobile
• Adept at decision making through analysis of quantitative and qualitative data
• Expertise in Requirement Analysis, Planning, Autosar Configuration, Development, Debugging, Testing & MISRA C, Electric Vehicle Charging Standard(V2G) ISO 15118, DIN 70121,IEC 61851, ISO 14229-1, Autosar SWS & DO178B (configuration management)
• Development using Assembly, C, Autosar, python, capl.
• Experience in Team Leading, Architecture designing, Stack releases for customer.
• In-depth knowledge of Windows, Embedded Systems and Autosar, Complex Device Driver (CDD), BSW, COM,CAN, CAN FD, RTE, UDS
• Worked extensively on Embedded Systems used in Electric Vehicle System, Missile Software Development.
Software Engineering Skills
Skills
Description
Autosar Modules
(1) Complex Device Driver (CDD)
(2) CAN Communication Stack
(3) Run Time Environment (RTE)
(4) Diagnostic Event/Fault Manager (DEM)
(5) Diagnostic Communication manager (DCM) with UDS concepts
(6) Functional Inhibition Manager (FIM)
Analysis & Design
Requirement Analysis (SRS), System Design and Review (SDD), Traceability,
Root Cause Analysis, Architecture Flow design, Project Planning MPP
Application Implementation, BSW Autosar configuration (Diagnostic, RTE, COM stack, BSWM), Complex device driver development (CDD)
Test cases writing (ITP) User manual writing, change note writing
Programming Languages
Proficiency in Configurable Autosar tool (as per Autosar SWS), Embedded C, Windows environment
Proficiency in Assembly
Beginner in (Python Scripting, Shell Scripting).
Processor
Renesas RH850, Arm Cortex M4, ARM cortex, Wifi module ESP8266, PowerPC 7410, TigerSharc(TS101,TS201), Sharc(ADSP21062) (DSP),
Operating Systems
DOS, VxWorks RTOS, OSAK, WINDOWS 7
Integrated Development
GHS Multi 7.1.6, Ozone V2.56, Eclipse, Visual Studio 2010, VDSP++ 4.5, Keil
GCC compiler, CANalyser 11.0, CANoe 11.0, CANoe12 Smart Charging Package, PCAN, C4K-
AUTOSAR Configurator, Vector DaVinci configurator, Enterprise Architecture (EA), Anaconda
Environments (IDE) & Tools
Multi IDE, Eclipse, Code composer studio, MATLAB + Simulink, Arduino IDE, MBED
Version control
GIT, SVN
Protocols
Electric Vehicle Charging Standard ISO 15118, IEC 61851, Military-standard-1553B, ISO 26262, ISO 14229, RS232, RS422(UART), SPI, I2C, CAN,CANFD, J1939,TCP-IP, UDP, MQTT
Other Software used
MS-Office, Star UML, Microsoft Visio, UNITY 3D, Beyond compare,Understand C
Experience A
Employer: KPIT Technologies ltd, Hinjewadi, Pune (Maharashtra)
Duration – 9 April 2018 – till now (2.7 years)
Function – Sr. Software Engineer
Location – Pune, India
About
KPIT is developing and providing solutions to different automotive technologies:
(1) Electric vehicle charging station and Functional safety
(2) Autonomous driving and ADAS
(3) Electric and Conventional Powertrain
(4) Vehicle Diagnostic and Autosar
Projects
Project
Description
Name
Vehicle to Grid (V2G)
Role
Sr. Software Engineer
Client
KPITs own product
Duration
December 2018 to till date
Description
This is a CDD stack design and development for Electric vehicle Charging based on V2G's ISO Standard 15118, IEC 61851.
Team Size
12 persons
Responsibilities
Done Team Leading, Multiple Code Review, Document Review for project.
Done finalization of Architecture design of CDD along with subject matter experts.
Done activity planning for teammates, Stack release planning, along with management.
Done Integration of CDD module to other Autosar module e.g. RTE, BSW,DCM,CAN,COM
Done memory optimization for CDD stack.
Done design and development of Different State Machines
MemMap and Linker updates including integration activities.
Updated COM, CANIF, CANTP, PduR, RTE,configuration in C4K Autosar Configuration tool.
Updated Diagnostic configuration in C4K Autosar Configuration tool.
Done debugging, bug fixing, integration testing, resolved road blockers of stack
Operating System
& Language used
Windows 7, OSAK Autosar RTOS
Embedded C, CAPL
Development
Tools
GHS Multi, Eclipse, C4K KSAR, Vector Davinci configurator, Renesas Flasher
(other tools: Microsoft Visio, GIT, EA, CANoe12, SVN)
Processor and
Protocols used
Renesas RH850, MPC578G, QCA7005
(Protocol ISO 15118, UDS, Classical CAN, CAN FD, SPI)
Project
Description
Name
E-Bike
Client
General Motors
Work Location
Hinjewadi, Pune
Duration
April 2018 to November 2018
Description
Electric bicycle driving system is product of General Motors
Team Size
4 persons
Responsibilities
Done PWM generation development in embedded
Done requirement analysis
Done CAN, COM configuration in C4K Autosar Configurator
Development using Embedded Systems.
Operating System
Windows 7, OSAK
& Languages
Embedded C, CAPL, MATLAB Simulink
Development
OZONE, Eclipse, Wireshark, CANanalyser, PCAN, MATLAB (Simulink)
Tools
Anaconda python (Machine Learning)
Processor and Protocol
Broadcom
(Protocol: ISO26262 functional safety, J1939, Ethernet, CAN)
Experience B
Employer: Green Vision Solution Pvt ltd, Hyderabad
Worked on Client Location: Dr. Abdul Kalam Missile Complex, DRDO Hyderabad
Duration –September2014 – March 2018(3.6year)
Function – Embedded Software Engineer
Location – Hyderabad, India
About
Defense Research and Development Laboratory is a multi-disciplinary Missile System laboratory with thrust on design, development and flight evaluation of various types of Missile Systems for armed forces.
Projects
Project 1
Description
Name
Missile Infrared Imaging Receiving Seeker
Client
DRDO
Work Location
Hyderabad
Duration
September 2014 to November 2016
Description
Ballistic Missile(PDV) Infrared Image Processing seeker software developed on TigerSharc DSP processor. Infrared homing is a passive weapon guidance system which uses the infrared (IR) light emission from a target to track and follow it. Missiles which use infrared seeking are often referred to as "heat-seekers", since infrared is radiated strongly by hot bodies.
Team Size
1 person
Responsibilities
Implement IIR seeker algorithm based on algorithm document.
Development using Assembly, c,c++.
Testing and on-board analysis of real-time performance.
Designed GUI for testing in Visual studio on the absence of other sub-systems.
Designed Matlab simulink Testbed for testing software and maintains log files
Graphs. UML Diagram generation.
Maintain Documents for project like SRS, SDD, ICD, change note, STP, STD final release.
Configuration management & version control.
Referred Hardware and Programming datasheets and manuals
Operating System
Windows 7, Ubantu 14.04
& Languages
Embedded C, Embedded CPP, ASSEMBLY, MATLAB SCRIPT
Development
VDSP++ 4.5, VISUAL STUDIO 2010, MATLAB
Tools
Processor and Protocol
TigerSHARC TS101 & TS201 DSP processor
( Protocol: Mil-std-1553B, RS422, RS232)
Algorithm
Implemented
Image compression using Wavelet transform, Histogram, Image Tracking & processing
Project 2
Description
Name
Missile Electro-mechanical Actuation system
Role
Embedded Software Engineer
Client
DRDO Hyderabad
Duration
November 2016 to March 2018
Description
This project is basically designed for control missile movement after launch.
It is SHARC processor based BLDC motor controlled actuation system.
A lightweight, low power electro-mechanical actuation system with brushless DC motors has been developed for antitank missiles for driving aerodynamic control surface.
Team Size
2 persons
Responsibilities
Modified older actuation algorithm.
Developed code into ‘C’ language using VDSP++ 5.0 tool.
Testing and on-board analysis of real-time performance.
Designed UML Flow Diagram and Prepare SDD and STP documents.
Done inspection of missile actuation system functionality and environment test.
Designed visual studio based GUI for testing functionality.
Operating System
& Language used
Windows 7, ubantu 14.0
Embedded C, Matlab script, C#
Development
Tools
VDSP++ 5.0, VISUAL STUDIO 2010, MATLAB
(other tools: Microsoft Visio, GIT)
Processor and
Protocols used
SHARC ADSP-21060
(Protocol Mil std-1553B, RS422, Rs232)
Academic and Other Projects:
• Worked on several missile projects like – PDV, NAG, GARUDA, GARUTHMA, HELINA
• Design Mathematical MATLAB model for Vehicle cruise control and wiper control system.
• Vehicle and Pedestrian Detection using Machine learning SVM algorithm.
• Matlab Simulink based modeling
• Vuforia based Augment Reality Android App development.
Degree
University (Year)
Track
Percentage
Bachelor of Engineering(B.E.)
Bharti Vidyapeeth College of Engineering
Kolhapur, India ( 2009- July 2013)
Electronics & communication Engineering
61.75 % (First Class)
Higher Secondary
Certificate (Std XII)
Vivekanand College, Kolhapur, India
(2007-2009)
Physics, Chemistry, Mathematics
66.66 % (First Class)
Senior Secondary
Certificate (Std X)
S.K.Pant Walawalkar Kolhapur
(2005-2007)
Mathematics, Science
80 % (First Class)
Achievements and Interests
• Provided Autosar training to team.
• Received multiple times KROWN award for Autosar Electric vehicle inverter project.
• Reading Technical IEEE Research papers for Embedded and Automotive development.
• Win first prize in Robo race and Robo soccer in many collages.
• Reading Technical magazines like electronics for you.
• Participate in Android app and Augment reality development training.
• Participated White play card technology training for robotics.
• Meditation, singing songs, Soccer
Permanent Address Pl.No 94 Apurwae Banglow Market Yard, Kolhapur 416007
Languages known Hindi, English, Marathi