Power Plant Piping
Resume:
RHOD-VINCENT A. RAZALAN
SENIOR PIPING DESIGN ENGINEER
Manila, Philippines
Contact No: +639*********
Email add: **.*******@*****.***
OBJECTIVE:
To render my services with enough knowledge, skills, patience and hard work to achieve the company’s goal.
To seek employment that will contribute to my career and personal growth.
CAREER SUMMARY:
More than fourteen (14) years of experience in Detail design and Field/Site Engineering for Oil and Gas, Industrial Power Plant and Petrochemical Plant Projects, checking piping arrangement and isometric drawings, preparation of isometric drawings for shop and site fabrication and develops plot plan, key plan and other piping deliverables, coordinating with other engineering discipline and Contractor as a Site/Field Piping Engineer.
Knowledgeable in Intergraph Smart Plant 3D, PDS 3D, Micro Station, AutoCAD Drawings, Smart Plant Review, Navisworks Simulate also knowledgeable in executing and modeling of equipment, piping and its components from conceptual designs. Extracts and archives data for use in the development of isometric drawings and other related downstream piping engineering.
Extensive knowledge in equipment, piping layout & routings, piping details, piping isometrics, material take off, preparing sketches using CAD, applies standard design, principles, theories and codes such as SAES, ASTM & ASME.
EMPLOYMENT RECORD
NAME OF COMPANY: SNC-Lavalin Fayez Engineering
Address : Auto Moto Complex P.O. Box 20394
Al-Khobar, Kingdom of Saudi Arabia
Inclusive Date: November 10, 2019 – September 01, 2020
Position : SENIOR PIPING DESIGNER
Department : Piping & Pipeline Department
PROJECTS HANDLED:
Gas Storage Phase I Downstream Pipeline-HEWG-1,Hawaiyah
Kingdom of Saudi Arabia
June 2020 – September 01, 2020
JOB DESCRIPTION:
Executes 3D modelling of equipment, piping and its components
Develops Plot plan, key plan and other piping deliverables
Issuing of Deliverables as per Project Schedule.
Coordinating with other engineering disciplines
Reroute lines in accordance with P&ID requirements and client comments
Upgrade Water Disposal Facility - Qatif Cental Processing Facilities
Kingdom of Saudi Arabia
November 2019 – September 01, 2020
JOB DESCRIPTION:
Executes 3D modelling of equipment, piping, components and Tie-in Point site survey lay-out.
Site Survey for Tie-in points and Piping routing in the existing area
Develops Plot plan, key plan and other piping deliverables
Preparation of cleat details for the Tanks, Vessel and other support details.
Issuing of Deliverables as per Project Schedule.
Coordinating with other engineering disciplines
Review of P&ID’s and Vendor data & Vendor Drawings.
Reroute lines in accordance with P&ID requirements and client comments
Quality Checking of isometric drawings prepared by others.
Increase Jazan - Abha Refined Products Supply Capacity-JAPL-2 Pipeline
Kingdom of Saudi Arabia
November 2019 – January 2020
JOB DESCRIPTION:
Executes 3D modelling of equipment, piping and its components
Develops Plot plan, key plan and other piping deliverables
Issuing of Deliverables as per Project Schedule.
Coordinating with other engineering disciplines
Reroute lines in accordance with P&ID requirements and client comments
NAME OF COMPANY: JGC Gulf International Co. Ltd.
Address : P.O. Box 2257, Al-Khobar 31952
Kingdom of Saudi Arabia
Inclusive Date: October 31, 2012- October 30, 2019
Position : SENIOR PIPING DESIGNER I
Department : Piping Department
PROJECTS HANDLED:
Firm Up No.3 API Oil Separator Project (The Bahrain Petroleum Co.)
Kingdom of Bahrain
October 2018 – October 2019
JOB DESCRIPTION:
Executes 3D modelling of equipment, piping, components and Tie-in Point site survey lay-out.
Site Survey for Tie-in points and Piping routing in the existing area.
Develops Plot plan, key plan and other piping deliverables.
Preparation of cleat details for the Tanks, Vessel and other support details.
Issuing of Deliverables as per Project Schedule.
LC/LG general Arrangement Dwg. preparation for Vessels and Tanks.
Coordinating with other engineering disciplines.
Review of P&ID’s and Vendor data & Vendor Drawings.
Interference checking and 3D Model Review using Navisworks Simulate.
Reroute lines in accordance with P&ID requirements and client comments.
Quality Checking of isometric drawings prepared by others.
Segregate Gasoline Sewer System Project (The Bahrain Petroleum Co.)
Kingdom of Bahrain
October 2017 – October 2018
JOB DESCRIPTION:
Executes 3D modelling of equipment, piping, components and Tie-in Point site survey lay-out.
Site Survey for Tie-in points and Piping routing in the existing area.
Preparation of cleat details for the Tanks, Vessel and other support details.
Coordinating with other engineering disciplines.
Review of P&ID’s and Vendor data & Vendor Drawings.
Interference checking and 3D Model Review using Navisworks Simulate.
Reroute lines in accordance with P&ID requirements and client comments.
Quality Checking of isometric drawings prepared by others.
Saudi ARAMCO RAMT Project
Kingdom of Saudi Arabia
April 2016 – October 2017
JOB DESCRIPTION:
Coordinating with other engineering discipline and Contractor as Site/Field Piping Engineer.
Coordinating for PMCC punch closing works.
Answering technical queries.
Preparing Field Change Iso and As-built drawings.
Line Checking of piping construction and Test package preparation.
Site Survey for Tie-in points and Piping routing in existing area.
Develops Plot plan, key plan and other piping deliverables.
Preparation of cleat details for the Tanks, Vessel and other support details.
Material Take Off and BM/BQ Calculation.
Issuing of Deliverables as per Project Schedule.
LC/LG general Arrangement Dwg. preparation for Vessels and Tanks.
Quality Checking of isometric drawings prepared by others
Review of P&ID’s and Vendor data & Vendor Drawings.
Executes 3D modeling of equipment, piping and its components.
Reroute lines in accordance to P&ID requirements and client comments.
Checking General Piping Arrangement and isometric references against P&ID.
Extracts and archives data for use in the development of Isometric drawings and other related downstream piping engineering.
Interference checking and 3D Model Review using Autodesk Navisworks Review
(RABIGH) Ethane Cracker Debottlenecking Package
Kingdom of Saudi Arabia
April 2015 – April 2016
JOB DESCRIPTION:
Coordinating with other engineering discipline and Contractor as Site/Field Piping Engineer.
Quality Checking of isometric drawings prepared by others.
Site Survey for Tie-in points and Piping routing in existing area.
Line Checking of piping construction and Test package preparation.
Executes 3D modeling of equipment, piping and its components.
Reroute lines in accordance to P&ID requirements and client comments.
Checking General Piping Arrangement and isometric references against P&ID.
Extracts and archives data for use in the development of Isometric drawings and other related downstream piping engineering.
Interference checking and 3D Model Review using Autodesk Navisworks Review.
Fadhili Gas Plant – Proposal
Kingdom of Saudi Arabia
March 2015 – April 2015
JOB DESCRIPTION:
Executes 3D modeling of equipment, piping and its components.
Reroute lines in accordance to P&ID requirements.
Interference checking and 3D Model Review using Autodesk Navisworks Review.
(RABIGH) IWSPP Improvement PROJECT
Kingdom of Saudi Arabia
August 2014 – March 2015
JOB DESCRIPTION:
Quality Checking of isometric drawings prepared by others.
Isometric sketching and estimation of Material Take Off.
Doing Site Survey.
Al-Khafji Joint Operations Water Treatment Facility - Phase 3
Kingdom of Saudi Arabia
November 2012 – DECEMBER 2014
JOB DESCRIPTION:
Coordinating with other engineering discipline and Contractor as Site/Field Piping Engineer.
Answering technical queries.
Preparing Field Change Iso and As-built drawings.
Line Checking of piping construction and Test package preparation.
Site Survey for Tie-in points and Piping routing in existing area.
Develops Plot plan, key plan and provide piping deliverables.
Preparation of cleat details for the Tanks, Vessel and other support details.
Material Take Off and BM/BQ Calculation.
Issuing of Deliverables as per Project Schedule.
Quality Checking of isometric drawings prepared by others.
Executes 3D modeling of equipment, piping and its components.
Reroute lines in accordance to P&ID requirements and client comments.
Checking General Piping Arrangement and isometric references against P&ID.
Extracts and archives data for use in the development of Isometric drawings and other related downstream piping engineering.
Interference checking and 3D Model Review using Autodesk Navisworks Review.
NAME OF COMPANY Samsung Engineering CO., LTD. (IK-EPC)
Address : 5th Floor Engineering Bldg.
SAMSUNG SAUDI ARABIA CO. LTD.
Samsung Naffora Techno Valley (IK-EPC), Jubail.
P.O. Box 35816: Jubail 31961
Kingdom of Saudi Arabia
Inclusive Date: May 15, 2011 – September 30, 2012
Position : PIPING DESIGN ENGINEER
PROJECTS HANDLED:
Wasit Cogeneration & Steam Generation
Electrical Power: 750 MWA / Steam: 1,643.8 ton/hr (3,600,000 lb/hr)
Kingdom of Saudi Arabia
May 2011 – September 2012
JOB DESCRIPTION:
Quality Checking of isometric drawings prepared by others.
Executes 3D modeling of equipment, piping and its components.
Reroute lines in accordance to P&ID requirements and client comments.
Checking General Piping Arrangement and isometric references against P&ID.
Extracts and archives data for use in the development of Isometric drawings and other related downstream piping engineering.
Interference checking and 3D Model Review using Smart Plant Review.
Development of General Piping Arrangement drawings based on basic design data.
NAME OF COMPANY : Mitsubishi Heavy Industries Technical Services Corporation (MTS) was established as a 100% subsidiary of Mitsubishi Heavy Industries, Ltd. (MHI) of Japan to serve the increasing demands of designing works for its domestic and overseas projects )
Address : 24th Floor, Robinsons Cybergate Center Tower 3
Mandaluyong City, Philippines
Inclusive Date: July 03, 2006 – May 12, 2011
Position : PIPING DESIGN ENGINEER II
Division : Power Plant Engineering Division
Department : Plant Layout & Piping
Section : Piping Planning Design
PROJECTS HANDLED:
Toden Kawasaki 2-2 –Power Plant Project (Japan)
700 MW Gas Turbine Power Plant
January 2011 – May 2011
Paiton III – Expansion Project (Indonesia)
815 MW Coal Fired Power Plant
January 2009 – September 2010
Shuqaiq Phase II Independent Water and Power Project (Kingdom of Saudi Arabia)
850 MW (Net) Thermal Power Plant and 212,000 m3 / Day Desalination Plant
January 2008 – December 2008
O-mon Thermal Power Plant Project (Vietnam)
2x300MW Coal Fired Power Plant
August 2007 –December 2007
Rabigh IWSP Power Plant Project (Kingdom of Saudi Arabia)
1200MW Power Plant
November 2006 –July 2007
Ratchaburi Power Co. Ltd. Project (Thailand)
2x700MW Gas Fired Combined Cycle Power Plant
July 2006 –October 2006
JOB DESCRIPTION:
Executes 3D modeling of equipment, piping and its components.
Reroute lines in accordance to P&ID requirements and client comments.
Checking General Piping Arrangement and isometric references against P&ID.
Extracts and archives data for use in the development of Isometric drawings and other related downstream piping engineering.
Interference checking and 3D Model Review using Bentley Navigator.
Piping isogen extraction works by Intergraph PDS.
Development of General Piping Arrangement drawings based on basic design data.
Loading of piping commodity data by Intergraph PDS.
Checking and revising common isometric drawing error.
Detailing and arranging of Isometric drawings for shop and site fabrication piping. And making BQ list.
Piping isogen extraction works by Intergraph PDS.
On site coordination of latest site modifications and design progress alterations.
Checking attributes from P&ID.
SKILLS & QUALIFICATIONS:
Knowledgeable in the following CAD engineering systems and tools:
Smart Plant 3D
Intergraph PDS
Micro Station
Auto Cad
Smart Plant Review
Navisworks Review
Bentley Navigator & Explorer
Engineering Drawing/Drafting (Hands-On / Actual)
Adobe Acrobat
Microsoft Office
EDUCATION
Bachelor of Science in Mechanical Engineering, May 2005
Registered Mechanical Engineer, PRC License No. 0066783
Polytechnic University of The Philippines - Manila, Philippines
PERSONAL INFORMATION
Date of Birth : August 20, 1983
Place of Birth : Mandaluyong City, Philippines
Citizenship : Filipino
Gender : Male
Religion : Roman Catholic
Status : Married
Passport no. : P5513197A
Height : 1.7 meters (5’ 7”)
Weight : 75kg (165 lbs.)
Language : English and Tagalog
Spouse Name : Sandra M. Razalan; +639*********
Personal References:
Freilfred A. Cañada
SAPMT Construction Engineer/Site Superintendent – Civil/Structural
Saudi Aramco
Phone: +966-*********
E-mail: *********.******@******.***
Michael June B. Espinosa
Senior Piping Engineer
JGC Gulf International Co. Ltd
Phone: (+966) 560-***-****
E-mail: ********.*******@***.***
Arvin M. Macatangay
Piping Engineer I
Jacobs-ZATE
Phone: +966-*********
E-mail: *****.**********@******.***
Contact this candidate