VEL KUMARA SAMY V

Puliangudi-******, Tenkasi, Tamil Nadu, India adhzab@r.postjobfree.com +91-739******* https://skill-lync.com/profiles/Vel-Kumara-Samy-V-862 https://www.linkedin.com/in/vel-kumara-samy-v-54a164177 Career Objective

To work in a challenging and competitive environment where I can improve my knowledge and utilize them for the improvement of the organisation.

Academic Profile

Design Master Certification Program, Skill Lync (Present) B.E, Mechanical Engineering, Kongu Engineering College (KEC), Erode- 79.5% (2020) H.S.C, Adharsh Vidhyalaya Higher Secondary School, Erode- 91.6% (2016) S.S.L.C, Dharani Matriculation Higher Secondary School, Tenkasi- 95.8% (2014) Projects

Modelling and Assembly of American Chopper using Solidworks, Skill Lync

• Designed the various parts of the American chopper such as Front and Rear Fender, Gas Tank, Engine, Front Fork, Engine, Chassis and Chain in Solidworks.

• Assembled all the parts in assembly workbench in Solidworks using the concentric mate, coincident mate, parallel mate, angle mate and distance mate.

• Rendering is done in Solidworks Visualize in order to view in the real environment. Modelling and Assembly of Sunseeker Predator Yacht using Solidworks, Skill Lync

• Designed the various parts of the Yacht such as Hull, Superstructure, Front, Middle and Rear seats, Propeller, Radar, Radar Mast and garage door in Solidworks

• The Surface modelling of the hull and superstructure was designed according to the blueprint setup.

• Assembled all the parts in assembly workbench in Solidworks using the concentric mate, coincident mate, parallel mate, angle mate and distance mate.

• Rendering is done in Solidworks Visualize in order to view in the real environment. Designing the Outer and Inner Panel of a Hood using NX Cad, Skill Lync

• The design of the hood was carried out by using the styling class A surface as an input.

• Hood opening angle, Distribution of the force, Pedestrian safety and NVH these are the main consideration for designing the hood.

• Necessary Embosses and Mastic points are provided in order to dissipate force outside and to improve stiffness. Designing the Front Fender of the car using NX Cad, Skill Lync

• The design of fender can be carried out by using the master section and styling class A surface provided as an input.

• The Drip area, Sill Mount area, A pillar area, Splash area and Bumper mount area these are the areas are designed in the fender according to the master section.

• The wheel arc calculation of the fender is done and verified according to the standards of Japan, European and US. Designing the Roof of the car using NX Cad, Skill Lync

• The design of Roof can be carried out by using the master section and styling class A surface provided as an input.

• The Roof of the car consist of Front roof rail, Rear roof rail, Centre roof rail and bow roof these are designed according to the master section provided.

• The heat distortion criteria, snow load condition and section modulus of the roof are calculated and verified. Designing the Back Door of the car using NX Cad, Skill Lync

• The design of Back door can be carried out by using the master section and styling class A surface provided as an input.

• The consideration for designing the backdoor are rear visibility criteria, luggage volume, hinge & gas stay reinforcement, latch & striker reinforcement, wiper motor reinforcement and middle reinforcements

• The embosses and mastic points are placed where it’s necessary according to the design consideration.

• The draft analysis is carried out in the backdoor for determining the deviation of the product. Application of GD & T to the butterfly valve assembly using NX Cad. Skill Lync

• Designed the various parts of the butterfly valve such as body, shaft, retainer plate, disc plate, lever, nut and screw in NX Cad.

• The GD & T is applied to individual part of the butterfly valve according to the functionality of the part.

• The procedures and application of the symbols are studied according to the ASME 14.5 standard. Academic Projects

CFD Analysis of a Downdraft Gasifier with Biomass Blends, KEC

• The gasification is the process of converting carbon containing fossil fuel such as coal, wood waste and biomass waste into syngas such as carbon monoxide and hydrogen which in turn used to generating power.

• Spent tea waste and saw dust are the fuels which are taken as biomass input for the gasifier and it is taken in the ratio of 100:0, 80:20, 60:40 and 0:100.

• The numerical and experimental studies show that the behaviour of the gasifier is varies based on the air flow rate of the blends. The optimum producer gas composition is achieved at the blend 60:40 Leaf Collector and Chopper for Greenery Lawn, KEC

• The semi-automated leaf collecting machine is used for collecting both dry and wet leaves through its wide large nozzle.

• The range of the motor, blower in rate, blower out rate and storage capacity are calculated. The speed of the blower can be varied up to 7 speeds depends upon the type of the leaves.

• The collected leaves can be cut into small pieces and disposed in the easy manner or else it can be used as mulch for gardening purposes.

Publications

• Published a paper on “International Journal of Scientific and Technology Research” entitled as “An Experimental and Numerical Study on the performance of Downdraft Gasifier with Blends of Biomass”, Volume 9- Issue 6, June 2019.

• Published a paper on “International Journal of Scientific and Technology Research” entitled as “Automatic Leaf Collector and Chopper for Greenery Lawn”, Volume 8- Issue 12, December 2019. Internship & In plant Training

Automation Control System, Pune

• It is 5-week internship in which the organization thought about PLC, SCADA and ABB Robot Studio software’s.

• Learned the information about the automation system of pick and place robot in virtual and real environment. Ambal Auto, Maruti Suzuki, Erode

• Worked in trouble shooting and dismantling of vehicles for a period of seven days. Workshop Attended

• Attended a workshop titled as TROUBLE SHOOTING AND DISMANTLING OF TWO-WHEELER on 18th march 2017 at Madras Institute of Technology.

• Attended a workshop titled as DISMANTLING AND ASSEMBLY OF IC ENGINE on 18th march 2017 at Madras Institute of Technology.

• Attended a workshop titled as AUTOMOBILE WORKSHOP on 29th August 2017 at Kongu Engineering College. Extra-Curricular Activities

• Executive member in Society of Automotive Engineers at Kongu Engineering College during the year 2017-2018.

• Executive member in Radio Control Club at Kongu Engineering College during the year 2018-2019.

• Attended a 3-day webinar entitled as New Product Development Process conducted by Kumaraguru College of Technology.

Technical Skills

• CAD TOOLS: Catia, NX Cad, Solidworks and Creo

• ANALYSIS TOOLS: Ansys Fluent

• PROGRAMMING LANGUAGE: C++

• OTHERS: MS Office, HTML

Contact this candidate