Piping Engineer / Mechanical Engineer

HR Department

Dear Sir/Madam,

This letter and my enclosed resume was submitted in the interest of being part of your organization, for a professional with the skills and achievements I have to offer.

My name is Oliver R. Sanvictores and presently working at JGC Inc as Engineer II. In this position, my scope and responsibilities are as Piping Engineer /Mechanical Engineer/ Designer/ Checker from different areas in refinery. I am very much interested to work in your organization as Engineer. I am adept and have skills and background in utilization of different softwares like PDMS, Navisworks, Autocad, Microsoft office and designing skills /estimation works. I am currently involved in the design of platform of onshore facilities. I have over 14 years of experience in oil and gas industry and power plants, and I can handle any jobs involving engineering and management areas.

In the early years of my career, I started out as a Project Mechanical Engineer at JG Summit Petrochemical Corporation under Mechanical Engineering Department where I prepared studies and engineering design raised by process engineers and operations engineers (request for engineering works) for the improvement and enhancements of production process inside petrochemical plant. I am a team worker with ability to interact with co-workers effectively. Moreover, I am a multi-tasking individual with the ability to handle complex task with minimum supervision.

Thank you for reading this letter and the attached resume.

Should you favorably consider my application, you may contact me through my e-mail address adhxr8@r.postjobfree.com or through my mobile no. +639*********. I am also willing to travel in your location for interview or thru skype (skype:oliver.sanvictores).

Thank you and regards

Respectfully yours,

Oliver R. Sanvictores

Piping Engineer/Mechanical Engineer

OLIVER R. SANVICTORES

Rizal Avenue Extension Batangas City, Philippines 4200

+639*********

adhxr8@r.postjobfree.com; adhxr8@r.postjobfree.com;

Registered Mechanical Engineer • PRC License # 0066146 • TIN # 942-067-955

OBJECTIVE

To attain a challenging position as a Mechanical Engineer/Piping Engineer that is very much involved in engineering & design, implementation, and supervision. I desire to work in an environment requiring a diverse array of technical skills and have opportunities to explore the field of mechanical and engineering. I want to take up the responsibilities of a Mechanical Engineer/Piping Engineer where I can make effective use of my knowledge in a highly and efficient manner. Recommends best proposals based on new technologies. I seek and be inspired by my work and became very adept at what I do.

SUMMARY

14 years extensive experienced in the field of Piping Engineering & Mechanical Engineering practices.

Design experience:

-Prepare design (piping and mechanical detailed design using AutoCAD 3D, CAD WORKS), pipe sizing, material selection for Static Equipment such as oil/gas/chemical piping system and its appurtenances, storage tanks, maintenance platforms, etc.

Project management, supervision & execution experience:

-Supervised the installation, testing and commissioning of equipment for gas plant, oil/gas/chemical piping system and its appurtenances, Power Plants (CFB & Coal Fired), chemical dosing skids. Handled corrosion under insulation (CUI) projects.

-Reviewed engineering deliverables and initiate appropriate corrective actions.

-Planning & scheduling.

Safety, health and environment:

-Developed and implemented safety, health, environment, and pollution control programs in compliance to government regulations.

Other experiences:

-Prepares cost estimates, calculations, plans and drawings, bill of materials, technical and commercial proposals, review technical documents, technical bid evaluation and procurement of materials.

TECHNICAL STRENGTHS & SKILLS

Extensive experience in the field of Mechanical Engineering & Piping Engineering practices such as design, implementation, and direct supervision.

I am familiar with various standards and technical specifications such as ASME/ANSI, ASTM, NFPA, JIS, AWS, GOST, ASME Sec 2, API650, API653, and SSPC.

Detailed design and calculation of above ground storage tanks API650.

I had experienced in conducting NDE through Die Penetrant Testing, Magnetic Particle Testing, Ultrasonic Testing, Hydrostatic Testing, and Condition monitoring of machines and equipments.

Knowledgeable in using measuring instruments like vernier caliper and micrometer (inside and outside measurements), tachometer, feeler gauge, height gauge also in different tools for equipment reliability monitoring like bore scope, UV light, tachometer, and infra-red thermometer.

Ability to make, read, interpret and understand engineering plans, drawings and documents (Isometric drawings, P & ID, Structural drawings and Mechanical & Equipment drawings).

Computer literate: Microsoft Office (Microsoft Project Professional, Microsoft Word, Microsoft Excel, Microsoft Outlook, Microsoft Visio Drawing and Latest AutoCAD version (advanced 2D and 3D); Navisworks 3D; Computerized Maintenance Management System: CMMS (MAXIMO Database); SAP (ECC 6.0); CIMS (Construction Integrated Management System).

PROFESSIONAL EXPERIENCE

Engineer II, June 24, 2019 – present

JGC Philippines Inc.

Operations & Maintenance Engineering

Client: Pilipinas Shell Petroleum Corporation, Tabangao Batangas Refinery (PSPC)

Duties and Responsibilities (includes but is not limited to):

Prepared detailed engineering design based on Shell DEP’s to ensure equipment and system reliability. Produced mechanical and piping design drawings such as layouts and details relating to modifications to existing equipment and installations or related to new projects for all refinery complex for oil, gas and condensate facilities. To achieve this, includes carrying out research in the archives, taking measurements, making sketches and familiarizing with the scope of work and area. The design work includes re-routing of pipe works, repositioning of equipment, new plant layouts and installation, P&IDs, piping layouts, isometrics, updating drawings to make them “as-built”.

Carried out site survey work with the client (if required) to establish site dimensions, measurements and identify problems at site and provides advice for development of their design. Checks drawings which has been approved by the project engineer-in-charge/planning to ensure that the design is feasible and meets Shell DEP’s requirements.

Prepared material take-off in coordination with discipline engineer by referring to Shell DEP’s and international standards for detailed specification of material to be used. And preparing appropriate material procurement documentation to enable the accurate ordering of materials.

Acted as a delegate during periods of leaves by taking over other duties required to ensure continuity of workflow in Drawing Office.

Reviewed the Piping Design documents (P&ID, Isometrics, GA’s, and Tie-ins list, Supports Details, drawing orientation and vendor drawings).

Coordinated with other engineering discipline for technical compliance.

Performed other related function that maybe assigned from time to time.

Others:

Verify piping alignment and orientation according actual plot plan (e.g. piping elevation, piping components, equipment alignments etc).

Dimensional and clearance checking of all spools to be weld.

Prepare detailed design, alteration and re-construction drawings of tanks based on Shell DEPs, API 650 & API 653.

-Single & double deck floating roof re-design (pontoon and roof deck) and its appurtenances.

-Bottom and annular plates layout.

-Shell nozzles and reinforcing pads development layout.

Prepared BOM for all re-construction drawings.

Communicated and interfaces with other project designers and engineering disciplines.

Design and construction of quick flush drums (tundish) of Jet A1.

Prepared as-built drawings.

Piping and pipe support checker.

Mechanical Engineer (Specialist), January 2, 2019 – June 22, 2019

Atlantic Gulf & Pacific Company of Manila Inc (Yard 1, San Roque Bauan Batangas)

Construction Engineering Department

Client: Fluor Daniel Philippines

Project Title: JG Summit Expansion Project 2,

Aromatics & Butadiene Extraction Units

Duties and Responsibilities (includes but is not limited to):

Prepared equipment lists.

Reviewed equipment GA drawings.

Reviewed client specifications.

Sent technical queries referring to technical requirements of all issues on equipments.

Prepared equipment MTO for insulation & anchoring materials.

Reviewed all material requests and prepare TBE based on prepared data sheets sent to approved vendors (pipes, bolts & nuts, structural supports, expansion bolts, insulation & cladding (hot/cold etc..) materials.

Prepared material approval requests for the purchased materials to be sent to client.

Prepared ordering information for the materials prior ordering.

Participated on the inspection of materials received based on purchase request, TBE and as per client specifications.

Coordinated with other engineering discipline for technical compliance.

Performed other related function that maybe assigned from time to time.

Others;

Lead piping checker.

Lead pipe support checker.

Project Mechanical Engineer, September 3, 2018 – December 31, 2018

BGS Advance Testing Services

Duties and Responsibilities (includes but is not limited to):

Completed Projects handled:

1.Petron Mabini Batangas – Fire water line rehabilitation on 2 units Spherical Tank (live replacement).

2.Petron Ormoc Leyte - Piping LPG line modification for cylinder bulk filling.

3.Petron Jimenez Misamis Occidental

Project Execution Head (before & during project execution):

Attended client invitation on bidding for prospective projects.

Evaluated/assessed the technical aspects of all projects assigned and recommends the best proposal according to company policies.

Prepared detailed costing for additional works from client & discuss the detailed scope of works.

Coordinated with production planning and production personnel about the prioritization of project engineering works and other relevant activities.

Prepared and reviewed all the materials needed prior to the implementation of projects.

Prepared and updated warehouse inventory prior to final material purchase.

Coordinated with the purchasing personnel all immediate purchases of parts/components, equipment and manpower supply belonging to project engineering activities.

Prepared TBE for all needed materials and submit to client for approval.

Prepared and submitted manpower loading and equipment loading to client making sure that the schedule is not conflicting to other contractors.

Supervised engineering projects implemented and controlled of project resources and direct monitoring of status.

Prepare daily accomplishment report and submit to top management/client for the actual status of projects.

Monitored on site material consumption and prepared necessary actions for the shortages (if any).

Attended daily/weekly meeting with clients for the actual status of projects and prepare necessary actions in order to solve issues (backlogs, delays etc..).

Prepared working permits before start of projects.

Discussed JHA’s before execution of woks.

Performed other related function that maybe assigned from time to time.

Senior Mechanical Engineer, December 15, 2016 – August 31, 2018

EAST WEST WORKS & Industrial Services Inc.

Planning & Engineering Department

Duties and Responsibilities (includes but is not limited to):

Project Execution Head (during project execution)

Supervised all assigned projects.

Set deadlines, assign responsibility, monitor and summarize progress of project. Prepare reports to upper management regarding status of project.

Developed a detailed project plan to monitor and track the project progress.

Attended meetings regarding issues and concerns during project on-going implementation together with the clients.

Coordinated internal resources and third parties/vendors for the flawless execution of projects.

Ensured that all projects are delivered on time, within scope and within budget.

Participated in the preparation of risk assessment to minimize project risks.

Cooperated and communicated effectively with project manager and other project participants to aid assistance and technical support.

Performed other related function that maybe assigned from time to time.

Project locations & equipment handled during overhauling activities/shutdown works:

Sem-Calaca Power Corporation (SCPC) – Calaca, Batangas Philippines

-Burners (tangential firing)

-Pulverizers

-Rotary Air Pre-heaters

-Electrostatic Precipitators

-Steam Drums

-Hot & Cold Air ducts and Dampers repairs

-Stack cleaning

-Insulation & refractory installation and repair

Southwest Luzon Power Generation Corporation (SLPGC) – Calaca, Batangas Philippines

-Tubular Type Air Pre-heater

-Condenser Water Pipe replacement

-Instrument Air Line installation

-Design and installation of boiler manholes

Quezon Power Limited Co. (QPL) – Mauban, Quezon Philippines

-Rotary Air Pre-heater

-Burners

-Air ducts and dampers

-Insulation & refractory installation and repair

First Gen Corporation (Siemens Power & Operation) – Sta Rita, Batangas City Philippines

-SPEX interconnection piping to SPO (LNG Pipelines)

-Insulation & refractory installation and repair

First Gen Corporation (Siemens Power & Operation) – Limay, Bataan Philippines

-SPEX interconnection piping to SPO (LNG Pipelines)

Piping Engineer/Mechanical Engineer, November 16, 2013 – January 21, 2017

EPCC KNM Process System Sdn. Bhd. Kuala Lumpur, Malaysia

Engineering Department (Modular Plant Division)

Duties and Responsibilities (includes but is not limited to):

Piping Engineer EPCC

Reviewed the Piping Design documents (P&ID, Isometrics, GA’s, and Tie-ins list, Supports Details, drawing orientation and vendor drawings).

Reviewed the piping activities and completion in accordance with scheduled requirements.

Prepared Piping Specifications like Insulation Specifications, Piping Material Specification and Painting Specifications as per client requirements and applicable standards.

Compiled of all piping scope activities, including MTO’s, drawings, and project activity durations.

Prioritized scope activities to most efficiently meet project schedule requirements.

Ensured the proper implementation and adherence to project specifications and procedures.

Monitored piping designer’s quality and took necessary actions to maintain satisfactory standards.

Ensured that the implementation and adherence to project specifications and procedures.

Reviewed the plant 3D model for all design, accessibility, maintainability and constructability using 3D Navisworks.

Ensured that there will be no issue on the fabrication based on the piping isometric drawings.

Prepared updated project drawings and documents to as built.

Coordinated with other engineering discipline for technical compliance.

Performed other related function that maybe assigned from time to time.

Mechanical Engineer EPCC

Reviewed the detailed mechanical design documents (P&ID, Process Data Sheets, mechanical GA’s, drawing orientation and vendor drawings) based on project specifications, client’s standards and other applicable standards.

Prepared detailed engineering drawings, calculations and MTO’s for storage tanks.

Reviewed detailed engineering drawings of pressure vessels and provide cutting plans for pressure vessel plates.

Prepared updated project drawings and documents to as built.

Turn-Over Engineer/QA/QC Coordinator, March 16, 2013 – Nov 14, 2013

JG Summit – Daelim Philippines Incorporated (JG Summit Olefins Expansion Project)

Duties and Responsibilities (includes but is not limited to:

(Pre commissioning Phase)

Coordinated with different discipline for the status of QVDs needed for the Turnover.

Reviewed and verified used ITP during the construction up to mechanical completion.

Verified and checked the extent or limit of inspection based on the approved Inspection & Test Plan for each discipline.

Checked and evaluated the inspection records and certificates against the acceptance criteria stated on the ITP.

Monitored and expedited of quality verification documents (QVD).

Established schedules and procedures for the preliminary Mechanical Completion Walk down prior to start of proper Walk down activities.

Implemented and supervised punch clearing prior to Commissioning.

Performed other related function that maybe assigned from time to time.

PIPING Supervisor/Site Supervisor, September 12, 2011 – March 16, 2013

JG Summit – Daelim Philippines Incorporated (JG Summit Olefins Expansion Project)

Duties and Responsibilities (includes but is not limited to:

(Construction Phase)

Reviewed flow diagrams, plot plans, transpositions, and miscellaneous piping details to maintain and update material take-offs (MTO).

Communicated and interfaced with other project design and engineering disciplines.

Report progress to the project piping area/unit supervisor.

Assured that design continuity throughout the entire project was maintained.

Responsible for regular checking and reviewing of all latest ISO drawing revisions accordingly.

Responsible for coaching, teaching, and effective supervision of assigned piping execution and construction personnel.

Supervision on all piping works and piping supports from fabrication shop up to on-site erection and installation.

i.Check welding procedure.

ii.Verify piping alignment and orientation according actual plot plan (e.g. piping elevation, piping components, equipment alignments etc).

iii.Dimensional and clearance checking of all spools to be weld.

iv.Participates and witness NDE testing (HT, RT, PMI, PT, VT, PWHT etc.) on field and or on testing area.

v.Ensures that all supports, anchors, guides and other support attachments shall done in accordance with the approved pipe support drawings indicated on the isometric drawing.

vi.Making sure that prior to erection, the interior of all piping components shall be clean of loose scale, sand blasting grits or sand and all other foreign matter by air blowing.

vii.Inspecting all of the parts of the piping system each fabricated piece, straight length of pipe or fitting shall visually check for dirt, rubbish, grease loose scale etc prior to assembly.

viii.Secures that all piping shall be installed in such a manner that the resultant force on the equipment shall be kept to minimum. Proper care shall take at connection of joint to pump, compressor and other mechanical equipment. Flange alignment check shall also perform and witnessed.

ix.To ensure that all spools are uncoupled and isolated from rotating equipment until all welding is complete.

x.Secures that all piping openings shall be sealed before, during and after erection to prevent the ingress of moisture and foreign materials. Flanged or threaded ends shall seal with tape, plastic or plywood.

(Pre-Commissioning Phase)

Reviewed and checked isometric drawings against latest revision of P&IDs.

Monitored and checked fabricated/installed pipeline against latest revision of isometrics.

Checked piping schedule and material specification.

Checked branch reinforcements is in accordance with specification.

Confirmed pipe/fittings correct material and traceability.

Confirmed no interface to rotation of spectacle blinds.

Checked pipe supports installed and complete.

Verified correct gaskets and bolts are fitted at all mechanical joints.

Checked sealant on screwed connections.

Verified required vents and drains installed properly.

Checked flow directions of strainers, traps, check valves and globe valves.

Checked liners in between support and pipe installed.

Checked correct valves installed per line classification.

Proceed to Test Package execution (Hydro, Air or Visual Tests).

Construction Integrated Management System: CIMS/Implementation Construction Management

MECHANICAL/PIPING, September 12, 2011 – November 14, 2013

JG Summit – Daelim Philippines Incorporated (JG Summit Olefins Expansion Project)

Duties and Responsibilities (includes but is not limited to):

Record Management

Regular monitoring of workers and equipment usage during construction on daily basis.

Control all Piping ISO Drawing piping joint generation (pJ-Gen), piping welding joint and painting.

Check piping welder information and status of welding joints and tracking those joints according to quantity and quality.

File all revised and updated Piping ISO drawing for future references.

Piping Work and Quality Control

Ensure that all project or construction materials (pipes, valves, etc) are within the company’s specification and standards.

Detailed checking of piping components and finalize isometric drawings including welding details prior to construction.

Prepares test packages for NDE (RT, PT, HT, PMI, Ferrite, PWHT) of spools prior to installation and or erection.

Ensure proper procedure in executing piping installation and erection.

Checks and prepares proper painting applications and procedures.

MECHANICAL ENGINEER/PROJECT ENGINEER, January 2007- September 11, 2011

JG Summit Petrochemical Corporation

Duties and Responsibilities (includes but is not limited to):

Prepared detailed engineering design based on Engineering Standards to ensure equipment and system reliability.

Design conceptualization of all approved REWs and MODFORMs.

Cost control calculation.

Evaluated/assessed the technical aspects of all projects assigned and recommends the best proposal according to company policies.

Monitored and ensured all projects/works are done as per quality and safety standard.

Spare parts monitoring, equipment reliability and efficiency planning and control, and supervises jobs on special cases and TAM (Turn-Around Maintenance).

Ensured that all project materials such as pipes, valves, equipment spares, and other components are within the specifications and standards.

Provided engineering support and project engineering studies (comprehensive) to all approved REWs/MODFORMs and CFP requiring detailed drawings and computations.

Supervised engineering projects implementation and control of project resources and direct monitoring of status.

Evaluated the needs for subcontracting the project engineering group activities depending on the workload, nature of the project and committed production targets.

Coordinated with production planning and production personnel about the prioritization of project engineering works and other relevant activities.

Coordinated with the purchasing personnel all immediate purchases of parts/components, equipment and manpower supply belonging to project engineering activities.

Prepared all the materials needed prior to the implementation of projects.

Conscientiously participated in project hazards and operability meetings (HAZOPs) and job hazard analysis (JHAs).

Prepared monthly reports to all approved REW/MODFORMS and Projects.

Monitored spares availability, regularly checks, and reviews material specifications to ensure consistency and accuracy.

Prepared/Updated SOP’s/WIP’s related to the ISO 14001 Certifications.

Carried out material testing to ensure fabrication and repairs are done as per standard operating practices.

Prepared standard maintenance procedures to make task easier and safer and formulates appropriate changes to improve maintenance system and increase productivity.

MECHANICAL TECHNICIAN, October 2006-December 2006

JG Summit Petrochemical Corporation

Duties and Responsibilities (includes but is not limited to):

Responsible in carrying out approved mechanical works, maximizing the use of available manpower, tools, devices and materials to finish the work on schedule and conforms to the established standards.

Discussed work assignment with mechanical foreman/mechanical supervisor, examines faulty equipment to determine scope of works, and obtains necessary tools and spare parts before starting the job.

Participated in carrying out the annual shutdown or major equipments turnaround in the plant.

Gave advise to supervisors on result of task done and/or concerns encountered.

Coordinated closely with other section of the plant concerning equipment stopping, starting and performance testing to prevent accident or delay.

Maintained tools and equipment in tip-top shape.

Promptly responds to any emergency call even after regular working hours, rest day and/or holidays when summoned.

TRAININGS/SEMINARS ATTENDED

May 28 ~ 29, 2019 Hydrogen Sulfide (H2S) and Mercury Training and awareness

Pilipinas Shell Petroleum Corporation (Shell Tabangao Batangas Refinery)

April 20, 2011 Seminar on Bearings

SKF

March 27, 2007 Seminar on Personal Protective Equipment

Safety Center of the Philippines

December 6, 2006 Work Permit Course (Issuer and Receiver)

JG Summit Petrochemical Corp. Batangas Plant

November 17, 2006 Fundamentals of Mechanical Seals

Flowserve (JGSPC Batangas Plant)

November 8, 2010 Reconstructive Maintenance Welding

Cro-Magnon Corporation (JGSPC Batangas Plant)

February 4, 2005 Hydroelectric Power Plant

Alcorcon Engineering Review Center

EDUCATION

2000-2005 BATANGAS STATE UNIVERSITY

Bachelor of Science Degree in Engineering, Major in Mechanical Engineering.

1996-2000 BATANGAS NATIONAL HIGH SCHOOL

High School Diploma

PERSONAL BACKGROUND

I was born on January 10, 1983 in Batangas City, Philippines. Interests include biking, playing online games, surfing the Internet, reading magazines and pocketbooks. Skills include desktop computer assembly, and sometimes computer hardware troubleshooting. A self-starter but at the same time also a team player, and an adaptable and persistent individual who is always willing to go the extra mile.

REFERENCES

References are furnished upon request.

DECLARATION

The information provided above is true to the best of my knowledge.

Contact this candidate