GREGORY KOEHLER

Williston, ND

adhv4b@r.postjobfree.com

701-***-****

Industrial Technician

Istate Truck Center - Williston, ND

October 2019 to August 2020

Preformed maintenance on various diesel engines. Changed oil, fuel filters, hydraulic filters, changed hydraulic and radiator lines on frac pumps. Preformed transmission swings, fluid end swings and power end swings. Received Msha at nds in Bismarck and also received osha 10 for construction training.. Preformed maintenance on water transfer pumps. Built a test area for frac pumps to test to see if the pump is operating efficiently and safely with no harm done to the environment or operator running the frac unit. Counted parts by classifying parts number, quantity, and quality. Operated a fork lift to bring trailers in and out of the shop. Greased frac trailers and axles to rig or other equipment. Loader Operator

Wyoming Casing - Williston, ND

June 2018 to October 2019

Rack pipe and remove thread protectors. Visually inspect threads before reapplication to ensure field readiness and safe operation of equipment. Drift the pipe and clean the threads. Number and strap the pipe as requested. Work professionally with the company to ensure the job is completed to the standards expected. Understood and complied with all safety rules and company policies of Wyoming Casing Service, Inc. Worked assignments carried out to the highest quality level. Strong experience of operating front end loader and other heavy machineries. Knowledge of construction industry and transportation rules and regulations. Comprehensive understanding of working mechanism of front end loader and minor repair work. Capable of multitasking and working under harsh conditions. Ability to perform duties independently or in teams, as required. Loaded or unloaded 4, 5, 7, 9, and 13 inch casing pipe from truck to pipe racks. Testing Assistant

1st Rate Energy - Williston, ND

October 2017 to June 2018

Rigged up pipe to the wellhead and casing. Rigged up to the oil and gas sales line. Worked with and around coil tubing, work over, and normal flow back operations. Assisted rig workers with rolling pipe for drill out operations. Drove loader to pick up and safely place flare line pipe or carried them by team lift. Lit flare with propane and pilot light. Monitored frac tanks on current water and oil levels to ensure no fluids to be spilled on the ground. Used workout to identify how much water and oil are in frac tanks. Converted inches into barrels too determine a rate for barrels per minute. Gathered information from treater shacks to get accurate information on how much oil, gas, and water is being sent by the separator. Ran the G

WORK EXPERIENCE

separator and maintained proper levels for the entire work shift 24 hour operations. Transferred water using pumps and filter pods changing filter socks to ensure clean water is being transferred. Flow back Assistant

Rogue Pressure Services - Williston, ND

May 2017 to October 2017

Rigged up pipe to the wellhead and casing. Rigged up to the oil and gas sales line. Worked with and around coil tubing, work over, and normal flow back operations. Assisted rig workers with rolling pipe for drill out operations. Drove loader to pick up and safely place flare line pipe or carried them by team lift. Lit flare with propane and pilot light. Monitored frac tanks on current water and oil levels to ensure no fluids to be spilled on the ground. Used kolorkut to identify how much water and oil are in frac tanks. Converted inches into barrels too determine a rate for barrels per minute. Gathered information from treater shacks to get accurate information on how much oil, gas, and water is being sent by the separator. Ran the separator and maintained proper levels for the entire work shift 24 hour operations. Transferred water using pumps and filter pods changing filter socks to ensure clean water is being transferred. Assisted in rig up rig down operations with coil tubing, work over, frac, and flow back. Monitored frac tank levels using a strap stick and converting inches into barrels. Assisted snubbers in rigging up/down snubbing unit onto wellhead. Checked well pressure, tanks levels, and junk catcher hourly or every 30 minutes. Pumped recycled fresh water into rig tanks using filter pod. Changed filter socks on the filter pod when needed. Pressure tested valves to check the integrity of the valve. Connected water hauler hoses to the frac tanks to haul off water when needed. Preformed maintenance to the junk catcher and checking valves and chokes for washouts. Greased valves hourly while in operation. maintenance the separator when needed. Oiled and wire brushed iron when rigging up. Operated the separator during drill outs with work over. Sandwich artist

Subway - Yermo, CA

March 2017 to October 2017

Supervisor: Ramon

OK to contact supervisor: contact me first

Demonstrated integrity and honesty while interacting with guests, team members, and managers. Maintained high standards of customer service during high volume, fast-paced operations. Prepared all food orders within a 2-3 minute time frame. Stored food in designated containers and storage areas to prevent spoilage or cross-contamination. Reported to each shift on time and ready to work Prepared meats, vegetables, desserts, according to customers' orders and company procedures. Weighed meat ingredients for sandwiches. Provided customer service over the phone for catering orders. Cleaned and sanitized work areas, dishes, and utensils. Preparing and maintaining food at proper temperatures. Keeping the restaurant clean for a good dining experience and neat cooking environment. Open and close the store including counting all profits, making deposits and keeping the money supply stocked. Supervising and training other employees to maintain an efficient and fast paced work environment. Upselling food items and gift cards to customers. Complete orders quickly to ensure satisfaction of the customers.

Demolition

Labor Ready - Ventura, CA

March 2015 to October 2017

Hours per week: 50

Demolition

Supervisor: Abe

OK to contact supervisor: Contact me first

Assist construction site workers in erecting structures and demolition. Unload and load construction materials. Erect concrete forms and scaffolding. Drill and blast into earth and rock. Mix and pour concrete and asphalt. Level concrete and earth using trowels and shovels. Clean up spills and remove hazardous material. Direct and control traffic. Erect traffic control signs. Assist heavy equipment operators to secure special attachments to equipment Signal operators to guide them in moving equipment and provide assistance. Oil and grease hoists. Operate pneumatic hammers, and tampers. Line cook

Cali Burger - Newberry Springs, CA

March 2017 to May 2017

Supervisor: Miesha

OK to contact supervisor: contact me first

Floorhand/Derrickhand

E and B - Bakersfield, CA

March 2014 to March 2015

lined up the well service rig with the well. Set hydraulic jacks, handles pads/boards and assisted in attaching the guy wires to the anchor. rigging up/down horse head from pumping unit. Responsible for work performed for the rod basket and tubing board transferring rods and tubing from the vertical racks to the elevator, performed servicing on the well. Assisted in picking up or laying down tubing, manually lifting the tubing from the rack onto the work floor or vice versa. Assisted in walking the rods when laying down rods. Reported any safety hazards, accidents or maintenance issues to the rig supervisor. Ensured that work carried out is in compliance with company policies and procedures and according to safety. Floor Hand

Wisco/Gibson's - Williston, ND

August 2013 to March 2014

Hours per week: 90-120

Floorhand

Supervisor: Jesse Holmquest

Okay to contact supervisor: Contact me first

Frequently climbed ladders while wearing a harness on an elevated platform. Lifted and carried 50-100 pounds independently while walking on uneven surfaces. I have clear vision to judge near and far distances to maintain awareness of surroundings. Stayed alert and focused up to 16.5 hours while performing repetitive and routine activities. Worked closely with others as we worked together in the confined area of the work over rig. Performed services on oil and gas wells as part of a 3 person team. Assisted in rigging up and rigging down. Pulling/laying down rods, tubing and casing. Routinely prepared the rig floor area for whatever operation was to take place as well as function checks all casing handling and running tools to enable carrying out operational activities such as picking up, laying down, running, retrieving, connecting, trippin rod string, and completion string.

Welders helper

Adecco U.S.A - Williston, ND

April 2013 to August 2013

Warehouse/Inside sales

Supervisor: Jeane Storm

Okay to contact this supervisor: Yes

Performed duties to assist workers in welding, brazing, and thermal and arc cutting activities. Moved work pieces, tools, and supplies, manually or by hand truck. Lifted, moved, held, or clamped work pieces to table, into jigs, or into position as directed, manually or by using hoist, pry bars, wrenches, hammer, and wedges. Cleaned work pieces to remove impurities, such as slag, rust, and grease, using wire brush, portable grinder, hand scraper, or chemical solutions. Directed non- standard issues and customer inquiries to senior warehouse personnel. Safely operated forklift or other machinery to load, unload, sort, stage and transport products. Prepared orders by processing requests and supply orders, pulling materials, packing boxes and placing orders in delivery area. Roustabout/pressure washer

TKO oilfield Services - Watford City, ND

March 2013 to April 2013

Supervisor: Jason Smith

Okay to contact this Supervisor: Contact me first

Cleaned up spilled oil by bailing it into barrels. Kept pipe deck and main deck areas clean and tidy. Unscrewed or tighten pipes, casing, tubing, and pump rods, using hand and power wrenches and tongs. Bolted together pump and engine parts. Walked flow lines to locate leaks, using electronic detectors and making visual inspections. Moved pipes to and from trucks, using truck winches and motorized lifts, or by hand. Dug drainage ditches around wells and storage tanks. Guided cranes to move loads about decks. Supplied equipment to rig floors as requested, and provided assistance to roughnecks. Deli clerk

Albertsons - Williston, ND

November 2012 to January 2013

Hours per week: 40

Bistro

Supervisor: Amanda

Okay to contact this Supervisor: Contact me first

I had the ability to work week-ends and holidays. I had the ability to work from 10:30 am - 11:30 PM Checked work stations before, during and after shift for proper set-up and cleanliness. I greeted guests in a friendly and courteous manner. Maintained a professional appearance and manner at all times. Was willing to "pitch-in" and help co- workers with their job duties and be a team player.

Skilled laborer

Bakken Staffing - Williston, ND

September 2012 to November 2012

Supervisor: Kyle

Okay to contact Superviser: Contact me first

Measured, marked, or recorded openings or distances to layout areas where construction work will be performed. Cleaned or prepare construction sites to eliminate possible hazards. I controlled traffic passing near, in, or around work zones. I Loaded, unloaded, or identified building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications. I lubricated, cleaned, or repaired machinery, equipment, or tools. I positioned or dismantled forms for pouring concrete, using saws, hammers, nails, or bolts. Steam Cleaner Specialist

Department of the Navy - Yermo, CA

July 2009 to December 2009

Civil service)

Yermo, CA United States

07/2009 - 12/2009

Hours per week: 40 Series: 0001 Pay Plan: WG Grade: 05 Steam Cleaner Specialist

(This is a federal job)

Supervisor: Tom Yagler

Okay to contact this Supervisor: Contact me first

I cleaned military vehicles with high pressure steam portables. I used Overhead Cranes, Hydraulic Lifts, Floor Jacks, Hand Tools, Steam Portables, Rotary-Blast equipment, Sand Blast equipments, Preservation equipment, and Cabinet Blast. I masked vehicles that were ready for new undercoat or were ready to sell. I sand blasted government vehicles and parts. I used various acids such as Phosphoric Acid, Caustic Acid, and Alkalis. I collected, distributed, transported, stored, and disposed of various types of hazardous materials and waste out of Land assault vehicles, amphibious assault vehicles, hummers. I Worked as a checker and worked independently setting up specific jobs performing a variety of tasks in connection with receiving, shipping, storing and preparing all types of supply material and military automotive components, including hazardous materials, used to support all production business centers with Maintenance Center Barstow. I maintained necessary computerized and written records, and made required transactions to account for material. Adhere to regulations concerning storage of material, safety and proper housekeeping. Prepared and submitted to my supervisor daily work and backlog reports. I checked supplies for proper nomenclature, national stock number, document number, quantity, and condition code and routes material to the correct location or shop. I made proper annotation of any and all discrepancies relative to misidentified, unidentified damaged, short and over shipments on the receiving documents prior to receiving the material. I used various types of forklifts, trucks, carts, pallets jacks, and hand carts to deliver materials to shops when required.

Laborer/Equipment Operator

Randstad - Daggett, CA

April 2009 to July 2009

Supervisor: Steve Mcmullin760-***-****)

Okay to contact this Supervisor: Contact me first

I drove a tractor with a 7,000 gallon water tank. I backed it down on rows of mirrors. I used brushes, mops, pressure washers, rakes, shovels, to maintain the reflection of the mirrors and to maintain the solar plant. Lead a team of five or more people to accomplish cleaning the mirrors and the solar plant. I painted rooms at solar energy generators 1 and solar energy generator 2. Monitored the perimeter of the Solar Plant driving a truck or watched surveillance cameras. Installed various types of equipment, replaced huge mirrors used to obtain energy from the sun. I spliced cable and other types of wire when called for. Frequently changed out flex hoses used in the solar plant. Painted different things, such as towers, railings, and ladders and also had to climb certain structures to paint using a pattern. Used basic paint brushes and also paint guns powered by an air compressor. I operated a Hazmat truck, which is used in the transporting and disposal of heat transfer fluid.

Railroad Laborer

Marine Corps Logistics Base - Yermo, CA

December 2008 to March 2009

Marvin Irvin

Okay to contact this Supervisor: Contact me first

I strapped military vehicles to trains. I used Ratchets, Wrenches, Hammers, Pliers to strap and un-strap military vehicles off the train cars. Helped safely transport military vehicles on and off the train cars. I worked with a team of 7 or more people. I used Pliers Screwdrivers, nut drivers, Wire strippers, fishing tools, Power drills, drivers, hammer/drills Power saws. I Compiled and maintained material and parts inventory and status information to expedite movement of material and parts between production areas, according to predetermined production schedules and order priorities. Application Specialist

Receivable Management Services - Pueblo, CO

September 2008 to December 2008

Supervisor: Jose Gonzalez

Okay to contact this Supervisor: Contact me first

I talked to Sprint customers over the phone regarding bill issues, past dues, payment arrangements, payments, and fraud. Took payments from customers set up payment arrangements fixed errors off bills. Used a computer typed over 55 words per minute with zero errors. I am proficient in keyboarding and good at spelling, punctuation, grammar, and oral communication. I have good customer service and interpersonal skills discretion, good judgment, organizational or management ability, initiative, and the ability to work independently. I constantly interacted with the public, so I have good communication and problem-solving skills. I have great verbal communication and listening skills. I have a pleasant speaking voice. I communicated through e-mail, I posses good typing skills, spelling skills, and grammar skills were necessary in my line of work. I provided an interface between customers and companies. I am friendly and possess a professional manner.

I am proficient in Microsoft word, Microsoft PowerPoint, Microsoft Excel. Psychology

University of Phoenix

May 2009

High School Diploma

Silver Valley High School Yermo

May 2008

• Heavy Equipment

• Oilfield (6 years)

• Communications

• Machine Operator

• Maintenance

Mechanical Knowledge — Proficient

April 2019

Measures a candidate's ability to understand and apply mechanical concepts and processes. Full results: Proficient

Construction Safety — Highly Proficient

August 2020

Using safe practices while on a construction site. Full results: Highly Proficient

Work Motivation — Highly Proficient

September 2020

Level of motivation and discipline applied toward work Full results: Highly Proficient

Work Style: Reliability — Expert

September 2020

Tendency to be dependable and come to work.

Full results: Expert

EDUCATION

SKILLS

ASSESSMENTS

Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.

Contact this candidate