Electrical Mechanical
Resume:
Nichiel Mamadod Malisay
**.*******@*******.***
Position: MEP Electrical Technician
Experience: 1 3 years
Discipline: MEP System
English/Arabic Speaking Capabilities: Good
Education: Electrical Technology
School: Don Bosco Technical College
Address: Manila Philippines
Degree/Certification: Certificate
Trainings:
• Institute Integrated Electrical Engineers
of the Philippines(IIEE-KSA & Qatar
Chapter ) Training Certification accredited
• The Maritime Training Center of the Philippines
• (TMTCP) ISO-IMO Accredited
• Doha Industrial Safety Services (DISS)
Addition Skill:
• Heating Ventilation and Air-Conditioning System (HVAC)
• Man Lift Operator
• Disk/Windows 2000,XP, Window7-8 Operating System
• Microsoft Word, Microsoft Excel
1. Position: MEP Site in Charge
Duration: 18 August 2018-Present
Employer: COMO Facilities Management Services WLL.
Type of Project: Facilities Management – Hamad Port Qatar
Scope of Employer’s Contract: MEP
Scope of Work: MEP System
• Assemble, install, test, and maintain electrical or electronic
wiring, equipment, appliances, apparatus, and fixtures, using
hand tools and power tools.
• Diagnose malfunctioning systems, apparatus, and
components, using test equipment and hand tools, to locate
the cause of a breakdown and correct the problem.
• Connect wires to circuit breakers, transformers, or other
components.
• Inspect electrical systems, equipment, and components to
identify hazards, defects, and the need for adjustment or
repair, and to ensure compliance with codes.
• Advise management on whether continued operation of
equipment could be hazardous.
• Test electrical systems and continuity of circuits in electrical
wiring, equipment, and fixtures, using testing devices such as
ohmmeters, voltmeters, to ensure compatibility and safety
of system.
• Plan layout and installation of electrical wiring, equipment and
fixtures, based on job specifications
• Direct and train workers to install, maintain, or repair electrical
wiring, equipment, and fixtures.
• Prepare sketches or follow blueprints to determine the location
of wiring and equipment and to ensure conformance to
building and safety codes.
• Provide preliminary sketches and cost estimates for materials
and services.
• Provide assistance during emergencies by operating
floodlights and generators.
• Performed Planned Preventative Maintenance SMDB,
Feeder Pillar, DB & ACB Panel(PPM
• Trouble shooting and diagnostic Electrical & Mechanical
• Checking parameter
• Low pressure/high pressure
• Superheat/sub cooled
• Checking Compressor amps/Rated amps
• Checking Chilled water Temperature( Entering/leaving temp.)
• Checking Chilled water pressure( Entering/leaving temp.)
• Checking Primary pumps ( actual amps/rated amps, entering
pressure/leaving pressure)
• Checking VFD-Variable Frequency Drive
• Checking Secondary Pumps ( Hertz/RPM, actual amps/Rated
amps, leaving Pressure)
• Checking AHU-Air Handling Unit/FACU-Fan Coil Unit
• Monitor amps/ Rated amps
• Checking Air Flow
• Checking Fresh Air Actuator Percent Opening
• Checking Motorize Valve Percent Opening
2. Position: Sr. Electrical Technician- MEP
Duration: 28 December 2015 – June 15, 2018
Employer: Hamad and Mohamad Al-Futtaim Engineering
Type of Project: Facilities Management – Doha Qatar- Qatar University
and Al Faizal Holdings Group.
Scope of Employer’s Contract : MEP
Scope of Work: MEP System
• Making Decisions and Solving Problems
• Communicating with Supervisors
• Scheduling Work and Activities
• Inspecting Equipment, Structures, or Material
• Repairing and Maintaining Electronic Equipment
• Communicating with Persons Outside Organization
• Repairing and Maintaining Mechanical Equipment
• Prepare sketches or follow blueprints to determine the location
of wiring and equipment and to ensure conformance to
building and safety codes.
• Use a variety of tools and equipment such as power
construction equipment, measuring devices, power tools, and
testing equipment including ammeters, and test lamps.
• Install ground leads and connect power cables
to equipment, such as motors.
• Perform business management duties such as maintaining
records and files, preparing reports and ordering supplies and
equipment.
• Repair or replace wiring, equipment, and fixtures, using hand
tools and power tools.
• Work from ladders, scaffolds, and roofs to install, maintain or
repair electrical wiring, equipment, and fixtures.
• Place conduit (pipes or tubing) inside designated partitions,
walls, or other concealed areas, and pull insulated wires or
cables through the conduit to complete circuits between
boxes.
• Construct and fabricate parts, using hand tools and
specifications.
• Fasten small metal or plastic boxes to walls to house electrical
switches or outlets.
• Perform physically demanding tasks, such as digging trenches
to lay conduit and moving and lifting heavy objects.
• Provide preliminary sketches and cost estimates for materials
and services.
• Provide assistance during emergencies by operating
floodlights and generators, placing flares, and driving needed
vehicles.
• Performed Planned Preventative Maintenance of SMDB,
Feeder Pillar, DB & ACB Panel(PPM)
• Trouble Shooting and Diagnostic Electrical & Mechanical
• Checking Parameter
• Low pressure/high pressure
• Superheat/sub cooled
• Checking Compressor amps/Rated amps
• Checking Chilled water Temperature( Entering/leaving temp.)
• Checking Chilled water pressure( Entering/leaving temp.)
• Checking Primary pumps ( actual amps/rated amps,entering
pressure/leaving pressure)
• Checking VFD-Variable Frequency Drive
• Checking Secondary Pumps ( Hertz/RPM, actual amps/Rated
amps, leaving Pressure)
• Checking AHU-Air Handling Unit/FACU-Fan Coil Unit
• Monitor amps/ Rated amps
• Checking Air Flow
• Checking Fresh Air Actuator Percent Opening
• Checking Motorize Valve Percent Opening
3. Position: Electrical Supervisor
Duration: April07, 2009 – May 23, 2014
Employer: Mohammed Ali Al Swailem Company (MASCO) K.S.A.
Type of Project: Maintenance & Construction – Jubail Royal
Commission and ARAMCO KSA
Scope of Employer’s Contract: Electrical and Mechanical
Scope of Work
• Splices overhead, underground or submarine multi-conductor cable used
in electric power transmission system. Cuts sheath from installed cable
or gain access to cable connections preparatory to splicing. Test (Traces
or Phase out) each conductor
to identify corresponding conductors in adjoining cable sections,
according to electrical diagrams and specifications to prevent
incorrect connections between individual power circuits using test
lamp or bell system.
• Clean tins and splices corresponding conductor by twisting ends
together and soldering each connection
• Covers conductors with insulating or fireproofing materials. Fits lead
sleeve around cable joining and wipes molten lead into joints
between sleeve and cable sheath to produce moisture-proof joints.
• Fills completed sleeve with insulating oil can splice and repair 15KV
or high voltage oil filled and XLPE cables.
• Performs emergency services to stop oil leaks from damage oil filled
cables.
• Completes all work in accordance with safety rules, electrical codes
and other regulations. Responsible for safe custody and proper usage
of tools and safety equipment.
• Handles cable splicing tools, equipment and accessories like High Pot
Machine (70KV DC) High voltage rubber gloves, hot sticks, rubber
mat and grounding devices.
• Performs other duties as assigned by Electrical Supervisor/Foreman.
• Upgrades Electrical Equipment and devices when needed.
• Troubleshoots Electrical problems.
• Performs general wiring, replaces switches, receptacles, breakers
installation.
• Re-locates Existing Sub-station and RMU when needed.
• Signals Road Intersections Traffic system.
• Applies electrical theory and related knowledge to test and modify
developmental or operational electrical machinery and electrical
control equipment and circuitry in industrial or commercial plants
and laboratories.
• Assembles and tests experimental motor-control devices, switch
panels, transformers, generator windings, solenoids, and other
electrical equipment and components according to engineering data
and knowledge of electrical principles.
• Diagnoses cause of electrical or mechanical malfunction or failure of
operational equipment and performs preventative and corrective
maintenance.
4. Position: Electrician Duration: June.03, 2008-March.09, 2009
Employer: ASPROFOS ENGINEERING S.A Athens Greece
Type of Project: Oil Refinery/Petrochemical and large Infrastructure
Scope of Employer’s Contract: Refinery Projects
Scope of Work
• Installation, remove, operate, maintain and diagnose
problems for substation distribution or transmission
equipment and protective relays.
• Troubleshooting and analyze system failure.
• Handle electrical systems maintenance replacing
and repairing bulbs, sockets and fixtures
• Inspected, test, and maintains substation
electrical equipment.
• Inspect and testing equipment to
detect malfunctioning.
• Determine resistance test and loads using
Volt Meter and Ammeter.
• Test insulations
• Imposing specified voltage on insulation through
testing apparatus and calculating insulation loss.
• Perform inspections of the premises on a regular
basis to determine need for repair and
maintenance.
Declaration:
I hereby declare that the above mentioned information is true
and correct according to my Knowledge and my belief.
Applicant
Nichiel Mamadod Malisay
Contact this candidate