CURRICULAM VITAE

S.VANNIAPERUMAL

Phone No. : +919*********,

Email: adhtnz@r.postjobfree.com

Skype ID:vanniaperumal.raj

Commissioning, Operation and Maintenance Execution

Of Thermal and Gas Power Plants.

Career objective:

•To play a challenging creative role with a commitment to company excellence.

•To grow along with the organization and become a leader of the repute by effectively contributing the goals of organization.

Total Experience : 13 years

Present Employer

Indian Oil LNG Pvt. Ltd., Ennore, Chennai.

LNG gas CPP Shift Engineer O&M.

Past Employer #1:

M/s Surya Dev Alloys And Power Pvt, Ltd., Gummidipoondi

160MW Coal Based Thermal Power Plant CCR Operation and Maintenance

Past Employer #2:

M/s Hyundai Heavy Industries Co. Ltd., Saudi Arabia

4*720MW CCR OPERATOR

Super Critical Power Plant

Past Employer #3

M/s BGR ENERGY SYSTEM LTD.,

2*660MW Super Critical Boiler Commissioning NTPC Solapur.

Past Employer #4

M/s THERMAX LTD., B&H Group,

160MW,70MW power plant Commissioning and Operation.

Past Employer #5

M/s. CETHAR ltd., Trichy

AFBC,CFBC and WHRB boilers and Power Plant Commissioning Engineer.

Present Employer:

CONCERN : Indian Oil LNG Pvt. Ltd.,

Designation : Shift Engineer – CPP Operation

FROM : December -2019 to November 2020

Job Responsibility:

Gas Engine operation, Cold, Hot and Warm light off for Gas Engine

Responsible for field and SCADA and PLC operation in CPP.

Handle emergency situation of desk operation confidently and continuous monitor parameters of desk operation.

Control and maintain auxiliary equipment, such as Engine, pumps, compressors, cooling towers, heat exchangers, filters, lubricants, air, and auxiliary power.

Make adjustments or minor repairs, such as tightening gland and pipe joints; report any need for major repairs

Monitor and inspect power plant equipment and indicators to detect evidence of operating problems

Regulate equipment operations and conditions such as water levels based on data from recording and indicating instruments or from computers.

RMS maintenance of CPP & its Auxiliaries

CPP Operation with Island mode and regulate equipment operations according to the LNG process.

Maintain Spares for Power and plant and BOP Equipment’s.

To prepare Sop’s, Daily progress report, Defective report, Trip report for CPP.

Past Employer #1:

CONCERN : M/s Surya Dev Alloys And Power Pvt, Ltd.,

Designation : Senior Engineer – Operation and Maintenance

CAPACITY : 160MW (CFBC Boiler coal fired )

FROM : December -2017 to December 2019.

Job Responsibility:

Boiler operation, Cold, Hot and Warm light off for BTG.

Responsible for field and DCS operation of BTG

Handle emergency situation of desk operation confidently and continuous monitor parameters of desk operation.

Control and maintain auxiliary equipment, such as boilers, pumps, fans, compressors, cooling towers, condensers, feed water heaters, filters, and chlorinators, to supply water, fuel, lubricants, air, and auxiliary power.

Make adjustments or minor repairs, such as tightening gland and pipe joints; report any need for major repairs

Monitor and inspect power plant equipment and indicators to detect evidence of operating problems

Regulate equipment operations and conditions such as water levels based on data from recording and indicating instruments or from computers.

To prepare Sop’s, Daily progress report and Defective list for CPP.

To complete maintenance and Shut down work in boiler such as tube failure, thickness mapping, and shutdown inspection.

Past Employer # 2:

Concern : M/s Hyundai Heavy Industries Co. Ltd.,

Designation : Boiler DCS/CCR OPERATOR

Period : June 2016 to June 2017

Project Details:

SL.NO

NAME OF THE PROJECT

CAPACITY

1

AL Shuqaiq Steam Power Plants (SEC)

2880MW (4*720MW)

AL Shuqaiq, Saudi Arabia (Super Critical)

Plant Details:

1)Boiler : 4*2214 TPH,256barg, 5400CMitsubishi Hitachi Super Critical Sliding Pressure Operation Once Through Boiler,DFO and HFO tangential firing

2)DCS : Emerson Ovation

3)Turbine :4*720MW,250barg,537.20C,

Re-heat –47bar, 5390C

4)Generator : Hydrogen cooling,Sealing oil system, Stator water cooling

5)Cooling System : Open cycle

6)TG Make : GE, German

Job Responsibility:

P & I dwg,pressure parts and pipeline supports drawing checking for before boiler light up

Pre-Commissioning of Plants and its auxiliaries as per manufacture’s specification

Rectifying the practical problems rising in pre commissioning of boiler and all rotary equipment’s.

Executions Oil flushing for rotary equipment’s such as RAPH, Axial fans

Execute the rotary equipment Pre-Commissioning & Commissioning Activities such as Axial Fan, Rotary APH, Turbine and Compressor.

Execute the Card Board bursting in HFO & LDO line

Execute the Air Tightness Test(ATT) for Duct

Executions of chemical cleaning as per procedure

Execute the boiler hot & Cold clean-up

Observing proper operation and feedback signals through DCS for all equipment’s

Expertise the Super Critical plant light Up

Control and maintain auxiliary equipment, such as boilers, pumps, fans, compressors, cooling towers, condensers, feed water heaters, filters, and chlorinators, to supply water, fuel, lubricants, air, and auxiliary power

Expertise in Start-up Cold & Hot Circulation process of Condensate (CEP, Ejector, GSC, LP heaters), Feed water(Deaerator, HP heaters)& boiler water systems

Kept in service and monitor Auxiliary steam system, Deaerator initial heating, gland steam system line up, Vacuum pulling(Ejector System)

Expertise in start-up for Air and Flue gas system (ID,FD & GR fans)

Expertise in Start-Up and kept in service for SCAPH system

Expertise in DFO & HFO system taking in Service

Expertise in start-up of Furnace Purge

Expertise in start-Up of DFO & HFO leak test

Expertise in HFO heating process and start-up of steam tracing system

Expertise in Boiler burner Light- OFF

Expertise in line up and start for Boiler circulation Pump and observing proper operation

Expertise in maintaining the Water separator level and controlling the Water separator drain control valve(WDC) in auto and manual mode

Expertise in HFO Burner Change Over

Expertise in feed control valves change over and keep in auto mode depends on load

Ensure the Steam purity and give the clearance for TG rolling

Expertise in boiler operation in various mode such as Boiler Manual, Boiler Input demand (BID)

Expertise in Plant normal operation in Initial Pressure control mode

Expertise in safe shutdown for boiler feed water, steam, air and flue gas system, fuel firing, and condensate system.

Past Employer #3:

Concern : M/s BGR ENERGY SYSTEM LTD.,

Designation : Senior Mechanical Engineer (COMMISSIONING)

Period : October 2015 To June 2016

SL.NO

NAME OF THE PROJECT

CAPACITY

1

NTPC SOLAPUR SUPER THERMAL POWER PLANT

1320MW (2*660MW)

Plant Details:

1)Boiler : 2*2100 TPH,267barg, 5680C Hitachi Super Critical Sliding Pressure Operation Once Through Boiler, Coal Firing,Opposite firing.

2)DCS : Hitachi

3)Fan : Axial fans Howden

4)RAPH : Alstom

Past Employer # 4:

Concern : M/s THERMAX LTD., B&H Group,

Designation : Senior Mechanical Engineer (COMMISSIONING)

Period : May 2013 TO OCT 2015

COMMISSIONED PROJECTS:

SL.NO

NAME OF THE PROJECT

PERIOD

CAPACITY

1

M/s Surya dev Alloys Pvt. Ltd., Gommidipundi Tamilnadu 2*80 MW

2014 May to OCT 2015

2*330 TPH 95 ksc, 5450C Coal fired IR-CFBC boiler

2

M/s WELSPUN POWER LTD., Gandhidham, Gujarat

Two Month (March 2015 To May 2015)

350Tph 100 ksc,5450C Coal fired IR-CFBC boiler

3

M/s DCW Tuticorin tamilandu

Nov 2013 to Jan 2014

56TPH AFBC Bed plate type

4

M/s SHREE SHYAM ISPAT

Aug 2013 to Oct 2013

50TPH Bottom Hopper AFBC Boiler Coal fired

5

M/s ILC Iron and Steel Ltd.,

May 2013 to Jul 2013

17MW AFBC Bottom Hopper Boiler coal fired

Job Responsibility:

Pre-commissioning & Commissioning for various types of power plants such as CFBC,AFBC.

P & I dwg,pressure parts and pipeline supports drawing checking for before boiler light up

Pre-Commissioning of Plants and its auxiliaries as per manufacture’s specification.

Execute the Air Tightness Test(ATT) for Duct

Execute the no load trail & Load trail for all rotary equipment’s.

Execute the Pre-commissioning & Commissioning for boiler Feed water pump.

Executions of refractory dry out as per procedure and observe the expansions

Executing alkali boil out as per procedure to remove foreign matters and oil content in water as per required measurements (in PPM)

Execute the chemical cleaning activities as per procedure

Carry out steam blowing process with recommended pressure and temperature up to acceptable steam quality

Checking of entire spring supports (sliding, fixed) as per supplier’s specification and Buck stay for proper expansion

Inspecting of boilers and all rotary equipment’s, while commissioning such as Bearing lubricant & Temperature, cooling water systems, vibrations, etc

Observing proper operation and feedback signals through DCS for all equipment’s

Expertise in line up for rotary equipment’s lube oil system

Expertise in commissioning, Start-Up and kept in service for SCAPH system

Expertise in start of HP & LP bypass valve and observing proper operation

Ensure proper operation and maintenance of boiler in load condition and kept in observation

Expertise for safety valve floating.

Executing Soot blowing system (LRSB &RSB) commissioning activities were done.

Daily and weekly progress reports were send, while boiler commissioning.

Planning the erection &commissioning activities and make work schedule for the erection & commissioning team.

Preparation of action plan, attending customer complaints.

To Attend daily Customer & Vendor meeting While Plant Commissioning

Planning and scheduling planned and unplanned work.

Maintain Documents at site for while commissioning & Plant stabilization

Make the Protocols for after commissioning of all individual equipment’s.

Make the Schedule for Shutdown Jobs & complete the jobs at scheduling time.

Past Employer # 5:

Concern : M/s. CETHAR ltd., Trichy

Designation : Junior Engineer Commissioning

Period : May 2008 to Sep 2012

COMMISSIONED PROJECTS:

SL.NO

NAME OF THE PROJECT

PERIOD

CAPACITY

1

M/s Monnet ispat steel ltd.,

Raigarh,C.G. 90 MW

2008 May to 2009 December

2*120 TPH, 86 KSC 515 0C Coal fired AFBC boiler

2

M/s Inderjit Infrastructure ltd., wardha (80 MW)

2010 January to 2010 July

4*90 tph, 79 ksc, 5100 C Coal fired AFBC boiler

3

M/s orient cement ltd., devapur,(A.P.) 2*25 MW

2010 July to 2012

January

2*114 TPH, 89.46 KSC, 5200C Coal fired CFBC boiler

4

M/s STEEL AUTHIORTY OF INDIA,SALEM

2012 February to 2012 September

30 TPH coal fired AFBC boiler Process. EPC husk fired

Educational Profile:

Course / Degree

Institution / University

% of Marks

Year of Passing

B.TECH

Rajasathan Opern University

Correspondence course

Final Year

D.M.E., (MECH)

V.S.V.N.POLYTECHNIC College, Virdhunagarkamaraj University Madurai.

85.25%

with

Distinction

April ‘2008

SSLC

St.Mary’s.Hr.sec.school,

Vickramasingapuram

81.6%

April ‘2005

Computer Knowledge:

Packages : MS Word, Ms Excel, MS PowerPoint, AUTO CAD 2003

Certifications:

2nd Class Boiler Attendant in Tamilnadu.

Personal Profile:

Father’s Name : Mr. V. SIVARAMAKRISHAN

Date of Birth : 26th JUL 1990

Nationality : Indian

Sex : Male

Marital Status : Married

Languages known : Tamil, English, Hindi, &Tenglu

Permanent Address : No.9a, Ramasamy Street,

Sengottai, Thirunelvelli – 627809.

Mobile: +91-960*******

PASS PORT DETAIL:

Name : VANNIAPERUMAL

Passport no. : K860916

Date of issue : 02/11/2012

Date of expiry : 01/11/2022

References:

1. Mr.Shanmugavalliappan, 2.Mr.A.Thiagarajan Asai Thambi

Manager/Commissioning Manager/Commissioning,

M/s ISGEC ltd.,(IJT) M/s Thermax ltd.,

Chennai,Tamilnadu Pune, Maharashtra

Mobile: +91-989******* Mobile: +91-841*******

Declaration

I hereby declare that the particulars above by me are true to the best of my knowledge and belief.

Yours truly,

Place : Chennai

Date : 26/10/2020 (S.VANNIAPERUMAL)

Contact this candidate